RC4WD Hydraulik Kran Bausatz

Specifications:

• CNC Machined
• Black, Silver and Red Anodized Finishes
• Aluminum Alloy Construction
• Operating Voltage: 11.1-12.4V
• 40A Brushless ESC
• 270° Action Arm Turning Angle 
• Maximum Lifting Force:
• 3KG / 6.6lb Maximum for the Longest Arm
• 3.8KG / 8.4lb Maximum After Folding the 6th Section of the Arm
• 4.8KG / 10.6lb Maximum After Folding the 5th Section of the Arm
• 6KG / 13.2lb Maximum After Folding the 4th Section of the Arm
• Height after Folding: 11.8in / 300mm
• Width of Front Feet: 7.5in / 190mm (Folded) 29.5in / 750mm (Extended)
• Width of Rear Feet: 7.5in / 190mm (Folded) 16.3in / 415mm (Extended)
• Maximum Lifting Radius: 35.4in / 900mm
• Maximum Lifting Height: 742.91in / 1090mm
• Hydraulic Pump: Power Flow 0.8L / MIN, Rate Pressure 2.5MPA
• Total Weight: 176.4oz / 5000g (Including Packing Material)
• Manufactured by JDCustoms
• 30 Days Limited Warranty

Shown installed on Tamiya 56323 Scania R620 6x4 Highline for example (Not Included)

What's Included:

• 1x 1/14 Truck Mounted Hydraulic Crane

Required to Complete:

• Thread Locking Adhesives
• Straight Screwdriver
• Hex Drivers (1.5mm, 2mm, 2.5mm)
• Long Nose Pliers

Required Parts:

• 3S 6500mAh 11.1v 20c Lipo Battery (Max size: 2.87in x 3.15in x 5.2in) (Z-E0038)

Notes:

• Fits Tamiya 1/14 King Hauler Tractor Truck Kit.
• The hydraulic system uses #32 hydraulic oil.
• Requires additional XT60 connectors for the battery.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• You will need a minimum of 5 channels for Crane Model and at least 9 channels for 1/14 Truck Model.
• This can handle a 3 cell lipo.
• General portion of truck may be used, but will require modifications. 

Instruction Manual:

• Click here to download.