ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Tri alphabétique: Z à A
48 Par page
Karosserie Bittydesign Type-6R F1 klar
BDF1-T6R
Tested for several months in Italy, both outdoor on different layout included also the ETS track of Riccione and indoor on multiple carpets with different level of grip, the body has undergone many changes required to provide a product that responds better to our handling's expectations on...
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Rupture de stock
Karosserie Bittydesign Type-6C F1 klar
BDF1-T6C
Product Features - Made with high quality and genuine polycarbonate Lexan® - Included a complete kit that contain a white plastic helmet and proper screws for assembly and fix it to the body - Produced only Light Weight version, thickness of material 0,75mm - Sold clear with...
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
En stock
+ −
Karosserie Bittydesign IRON Truck 190mm klar 1:10
BDTR-190IRO
The IRON project has been made with the collaboration of expert industrial designer, it took several months to develop a product that can combine at best a stunning look and best performance at same time. Developed for maximum performance The design of the IRON body shell represents the...
AuswahlhilfeRace-Truck 190mm Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF54.90
En stock
+ −
Karosserie Bittydesign CA45M 1:10 M-Chassis
BDFWD-CA45M
This project was born from the desire to expand our range of bodies for the 1/10 MINI category by offering a design that reproduces the volumes of the C segment. The CA45-M body represents the best result of performance and aesthetics into the same product, a great mix with modern and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
En stock
+ −
Karosserie ARES-1 GT12 klar
BDGT12-AS1
The ARES-1 body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts and...
CHF28.90
En stock
+ −
Karosserie ARES-1 1:10 190mm GT klar
BDGT-190AS1
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF43.90
En stock
+ −
Karosserie AR8-GT3 1:8 360mm LWB klar
BDGT8-R8LW
AR8-GT3, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the GT class 1/8 scale long wheelbase (LWB) with an eye always turned to aesthetics and realism. The AR8-GT3 body is in fact our best combination of...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
En stock
+ −
Karosserie AR8-GT3 1:8 325mm SWB
BDGT8-R8
AR8-GT3, a new contenderbody shellcontender for the 1/8 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The AR8-GT3 body represents the best result...
MaterialLexan AuswahlhilfeGT8 Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF49.90
En stock
+ −
Karosserie AR8-GT3 1:7 Infraction/Limitless klar
BDGT7-R8
The body shell has been designed to fit the ARRMA® InfractionT V2 chassis. Also compatible for *LimitlessT model. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic washers) to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF117.90
En stock
+ −
Karosserie AR8-GT3 1:10 190mm klar
BDGT-190R8
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF42.90
En stock
+ −
Karosserie Agata 1:10 GT 190mm klar
BDGT-190AGT
AGATA, a new body shell contender for the 1/10 GT division The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers. Tested over several months...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF38.90
En stock
+ −
Karosserie 1:7 Viper für Arrma Felony klar
BDGT7-VPR
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT models. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock
+ −
Karosserie 1:7 JOTA für Arrma Felony/Infration/Lim
BDGT7-JTA
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT platform. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock
+ −
Karosserie 1:7 Destroyer für Arrma Infraction/Limi
BDMC7-DSTY
DESTROYER  is pure arrogance for your Infraction! This project was  born from the desire to create an extraordinary body shell developed  specifically for ARRMA. Premium Quality  first of all Our philosophy leads us not to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock
+ −
Heckflügel 1:7 GT klar
BDARA-R8W
CHF29.90
En stock
+ −
Heckflügel "High Downforce" für Jota 1:7 Arrma
BDWHD-JTA
CHF21.90
En stock
+ −
Foam Bumper für BDGT7-S65
BDARA-FOMS65
CHF19.90
En stock
+ −
F1 Helm 1:10 plastic weiss matt Type RX
BDF1-HLM-RX
CHF11.90
Rupture de stock
Car Stand, Ammo rebuild Station
BDCSTD-1518
Obsessive attention to details, 100% Made in Italy   made with strong and durable plastic material high quality laser cut shape and holes side logo and upper sigles laser engraved 4mm thickness size 24,5x15x9,1cm protective shaped foams included
CHF32.50
En stock
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (239)
Compatibilité
    Afficher tout (15)
Auswahlhilfe
    Afficher tout (28)
Material
Prix

CHF  –  CHF

  • ‎CHF5.9
  • ‎CHF117.9
Massstab
    Afficher tout (18)
Einsatz
Lackierung
Marke
    Afficher tout (65)
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags