ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
Motor Brushes (2pcs)
YOK-YM-086
Replacement motor brushes for Yokomo Pro Stock and Drift series brush motors. 5mm x 4mm size.
CHF4.90
Auf Lager
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF37.90
Auf Lager
+ −
Aluminum Bellcrank Base for RD2.0
YOK-Y2-202BB
This aluminum base increases the mounting rigidity of the bellcrank post and allows the offset of the bellcrank to be changed. It expands the options for the Ackermann ratio, which is most important for drift cars.
CHF14.90
Nicht auf Lager
50mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB50T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF13.90
Auf Lager
+ −
42mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB42T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF12.90
Auf Lager
+ −
39mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB39T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager
+ −
36mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB36T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager
+ −
33mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB33T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager
+ −
30mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB30T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF11.90
Auf Lager
+ −
27mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB27T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF9.90
Auf Lager
+ −
25mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB25T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF9.90
Auf Lager
+ −
20mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB20T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF9.90
Auf Lager
+ −
18mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB18T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF8.90
Auf Lager
+ −
16mm Titanium Turn Buckle (2pcs)
YOK-ZC-TB16T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF8.90
Auf Lager
+ −
Horizontal Body Mount für BD12
YOK-B12-016HB
Compatible with rear body posts that protrude rearward, such as BD12, these mounting parts reliably receive downforce and increase rear traction. Compatible with Twister/Twister Special bodies, the mounting parts are secured to the body using the wing fixing screws. Offset can be...
CHF8.90
Auf Lager
+ −
Alu Chassis US Spec für BD12
YOK-B12-002AU
Aluminum main chassis for the BD12 competition touring car. It is a highly rigid US specification with little wall removal, making it ideal for high-grip carpeted surfaces. The center of gravity is lowered, which is also effective as a high-side countermeasure.
CHF112.90
Auf Lager
+ −
Fahrzeug Tasche Team Yokomo
YOK-YT-28MB
A new hand-carry bag with the Yokomo logo is now available for transporting your machine to the race track. The bag is large enough to hold not only touring cars and drift cars, but also wide off-road cars. The bag is also equipped with a belt to easily hold the machine for safe...
CHF64.90
Auf Lager
+ −
Molded Suspension Parts Set for RO1.0
YOK-Z2-300RO
CHF15.90
Auf Lager
+ −
Cooling Fan Mount (Upper) for MO1.0/2.0/YZ-4SF
YOK-S4-CFMU
CHF27.50
Auf Lager
+ −
Graphite rear lower suspension arm (L)-1.0mm
YOK-B11-008RL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager
+ −
Graphite rear lower suspension arm (R) -1.0mm
YOK-B11-008RR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager
+ −
Graphite front lower suspension arm (R) +0.5mm
YOK-B11-008FR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 0.5mm longer than the standard of the first generation BD11, improving steering response and turning performance. It also reduces the burden on the front tires, so it is also...
CHF36.90
Nicht auf Lager
Graphite front lower suspension arm (L) +0.5mm
YOK-B11-008FL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. The front is 0.5mm longer than the standard of the first generation BD11, improving steering response and turning performance. It also reduces the burden on the front tires, so it is...
CHF36.90
Auf Lager
+ −
Cooling fan mount for YZ-4SF
YOK-S4-CFM
CHF24.50
Auf Lager
+ −
Cooling fan mount for SO1.0/2.0/YZ-2
YOK-Z2-CFM
CHF22.90
Auf Lager
+ −
Yokomo Racing Tool Turnbuckle Wrench 4.0mm (Carbon
YOK-YT-TBWRA
This is a tool that makes it easier to turn the 4.0mm size turnbuckle used in Yokomo machines. The carbon handle has a red anodized accent, giving it a lacy look. This is an essential tool when setting camber and toe-in.
CHF18.90
Auf Lager
+ −
Aluminum steering bell crank 20mm for BD10/9
YOK-B10-202SBLA
This is an optional steering bell crank that changes the steering characteristics of BD10. The length from the center of the steering post to the linkage pivot at the tip is 20mm, which is 1.5mm longer than the BD10 standard bell crank (18.5mm). The Ackermann ratio changes and the turning...
CHF24.90
Auf Lager
+ −
M3x5mm FTHS Screw (4pcs)
YOK-ZC-FT35
CHF4.50
Auf Lager
+ −
F/R Shock Spring (4pcs)
YOK-YS-RSS
CHF8.90
Auf Lager
+ −
Plastic Shock Absorber Set
YOK-RS-SSS
CHF25.90
Auf Lager
+ −
86T Spur Gear (DP48)
YOK-RS-SG4886
CHF5.90
Auf Lager
+ −
Plastic Belt Tension Cam (4pcs)
YOK-RS-BTC
CHF5.90
Auf Lager
+ −
Main Shaft
YOK-RS-644
CHF4.90
Auf Lager
+ −
F/R Pully
YOK-RS-630
CHF4.90
Auf Lager
+ −
Gear Diff Bevel Set
YOK-RS-503GP
CHF10.90
Auf Lager
+ −
40T Diff Pully / Diff Case
YOK-RS-503GH
CHF7.90
Auf Lager
+ −
Gear Diff Gasket
YOK-RS-501GG
CHF3.90
Auf Lager
+ −
Aluminum Gear Diff Drive Cup (4pcs)
YOK-RS-501GA
CHF16.90
Auf Lager
+ −
Maintenance Kit for Gear Diff
YOK-RS-500GM
CHF7.90
Auf Lager
+ −
Joint Protector
YOK-RS-500DP
CHF4.90
Auf Lager
+ −
117T F/R Drive Belt
YOK-RS-351L
CHF7.90
Auf Lager
+ −
Aluminum Motor Plate
YOK-RS-302M
CHF16.90
Auf Lager
+ −
Front/Rear Bulkhead Cap
YOK-RS-302C
CHF6.90
Auf Lager
+ −
Bulkhead A/B
YOK-RS-302
CHF6.90
Auf Lager
+ −
Front/Rear Suspension Mount
YOK-RS-301
CHF7.90
Auf Lager
+ −
FRP Servo Stay Plate
YOK-RS-203PL
CHF6.90
Auf Lager
+ −
Aluminum Outer Servo Stay
YOK-RS-203P
CHF6.90
Auf Lager
+ −
Aluminum Servo Stay
YOK-RS-203A
CHF13.50
Auf Lager
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (239)
Passend zu...
    Alle zeigen (63)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Alle zeigen (11)
Marke
    Alle zeigen (65)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags