ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
Yokomo Off-Road 13mm Feder DOT4 (7.25t) 2stk.
YOK-YS-12725F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager
+ −
Yokomo Off-Road 13mm Feder DOT5 (7.00t) 2stk.
YOK-YS-12700F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager
+ −
Yokomo Off-Road 13mm Feder DOT6 (6.75t) 2stk.
YOK-YS12675F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager
+ −
Yokomo Off-Road 13mm Feder DOT7 (6.50t) 2stk.
YOK-YS-12650F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager
+ −
Yokomo Off-Road 13mm Feder DOT8 (6.25t) 2stk.
YOK-YS-12625F
These springs are compatible with the F13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of...
CHF9.90
Auf Lager
+ −
Graphite Steering Block Arm L (2.4mm)
YOK-B12-RTC-5L
Graphite arm plate with an extended tie rod mounting position compared to the RTC standard arm to reduce toe-in change during suspension stroke. It improves turning performance especially on high grip surfaces.
CHF11.90
Auf Lager
+ −
Graphite Separate Battery Holder
YOK-B12-118S
Lightweight graphite battery holder. Split front and rear sections allow the chassis to remain flexible for torsion. Spacers are included to adjust to the battery thickness.
CHF20.90
Auf Lager
+ −
Graphite Front Shock Tower Stiffner (2.4mm)
YOK-B12-017S
This graphite plate connects the lower portion of the front shock tower to increase rigidity. It increases the rigidity of the shock tower and improves the shock's operating precision, while leaving the bulkhead surrounding it supple.
CHF9.90
Auf Lager
+ −
Graphite Bumper Support (2.4mm
YOK-B12-001BS
This graphite plate is mounted on the front bumper to strengthen the bumper. By catching crashes and other impacts with the bulkhead, it prevents damage to the front part of the main chassis.
CHF9.90
Auf Lager
+ −
H12 Front Wheel (Yellow) leucht gelb
YOK-B2-821HYA
CHF6.40
Auf Lager
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF59.90
Auf Lager
+ −
13Shock Piston f1.8x2x2.0mmfor SO/MO2.0
YOK-S4-S18213
Piston for F13mm shock. The hole diameter is 1.8mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
Auf Lager
+ −
13Shock Piston f1.7x2x2.0mmfor SO/MO2.0
YOK-S4-S17213
Piston for F13mm shock. The hole diameter is 1.7mm with 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
Nicht auf Lager
13Shock Piston f1.6x2x2.0mmfor SO/MO2.0
YOK-S4-S16213
Piston for F13mm shock. The hole diameter is 1.6mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
Auf Lager
+ −
O-Ring Set (2set) for SO/MO2.0 (Light Weight)
YOK-S4-S3OS
CHF3.90
Auf Lager
+ −
13 Spring Adjust Nut for SO/MO2.0
YOK-S4-S4AJ13
CHF7.50
Auf Lager
+ −
13 Shock Cap (Plastic) for SO/MO2.0
YOK-S4-S813R
A resin cap for F13mm big bore shocks. Drain screw included. Contains 2 pieces.
CHF8.50
Auf Lager
+ −
13 Shock Plastic Parts for SO/MO2.0
YOK-S4-S913
CHF11.90
Auf Lager
+ −
Alum. 13 Shock Cap Ball Hard for SO/MO2.0
YOK-YS-8BH13
Shock cap ball for F13mm big bore shock. The surface is hard coated to make it resistant to abrasion. Contains 4 pieces.
CHF11.90
Nicht auf Lager
Alum. S2 Front Chassis weight for SO2.0
YOK-Z2-002FWA
Aluminum front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is about 7g.
CHF17.50
Auf Lager
+ −
Steel S2 Front Chassis weight for SO2.0
YOK-Z2-002FWS
Steel front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is approximately 20g.
CHF17.50
Auf Lager
+ −
"X30" 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager
+ −
"X30" 13 shock set (rear/short)
YOK-S4-S1M13
This is a F13mm big bore shock set. The M size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager
+ −
"X30" 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager
+ −
RP Ultra Shock Oil #42.5 (Blue)
YOK-RP-113425
CHF8.90
Auf Lager
+ −
RP Ultra Shock Oil #37.5 (Purple)
YOK-RP-113375
CHF8.90
Auf Lager
+ −
RP Ultra Shock Oil #32.5 (Brown)
YOK-RP-113325
CHF8.90
Auf Lager
+ −
RP Ultra Shock Oil #27.5 (Light Yellow)
YOK-RP-113275
CHF8.90
Auf Lager
+ −
Alu Brush Motor Adapter für RS1.0
YOK-RS-302AD
CHF8.90
Auf Lager
+ −
Graphite shock tower für RS1.0 hinten
YOK-RS-018G
CHF22.90
Auf Lager
+ −
Graphite shock tower für RS1.0 vorne
YOK-RS-017G
CHF14.90
Auf Lager
+ −
Gokuraku off-road wing (straight)
YOK-ZS-GWBS
CHF14.90
Auf Lager
+ −
M2 x 3mm flat head socket screw (4 pieces)
YOK-ZC-F23
CHF2.90
Auf Lager
+ −
Steering Block L/R (Graph) for SO2.0(2pcs.)
YOK-Z2-415S2G
CHF11.90
Auf Lager
+ −
Steering Block L/R (Hard) for SO2.0
YOK-Z2-415S2H
CHF6.90
Nicht auf Lager
Graphite Steering Block Plate DOT1for SO2.0
YOK-Z2-415S21
CHF11.50
Auf Lager
+ −
Wide front wing for SO series
YOK-Z2-107FW2
CHF8.90
Auf Lager
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
Auf Lager
+ −
Off-road body for SO series (standard)
YOK-Z2-101S2
CHF26.90
Auf Lager
+ −
Alum Adjustable Front Axle for SO2.0
YOK-Z2-010AFA
CHF16.90
Auf Lager
+ −
Steel S2 Chassis weight (26g) for SO2.0
YOK-Z2-002WS
CHF15.90
Auf Lager
+ −
Alum. S2 Chassis weight (9g) for SO2.0
YOK-Z2-002WA
CHF16.90
Auf Lager
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF89.90
Auf Lager
+ −
Aluminum clamp type servo horn for YD-2ZX
YOK-Y2-204Z26
Aluminum servo horn for YD-2ZX. It has a shape that matches the mounting method where the servo is placed directly on the main chassis, and is a type that is fixed with a clamp through an adapter that matches the servos of each company.
CHF21.00
Auf Lager
+ −
Aluminum motor mount for BD10F
YOK-B10-302MF
Aluminum motor mount for BD10F. Backlash can be adjusted by sliding the joint with the center mount.
CHF22.90
Auf Lager
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF39.90
Auf Lager
+ −
Stabidraht hinten 1mm BD11/BD12
YOK-B11-412R0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager
+ −
Stabidraht hinten 0.9mm BD11/BD12
YOK-B11-412R09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (239)
Passend zu...
    Alle zeigen (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Alle zeigen (11)
Marke
    Alle zeigen (65)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags