ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
Graphite front stiffener plate BD11
YOK-B11-003SP
CHF17.90
Auf Lager
+ −
Aluminium upper deck holders BD11
YOK-B11-003AH
CHF26.90
Auf Lager
+ −
Graphite upper deck BD11
YOK-B11-003
CHF32.90
Auf Lager
+ −
Graphite main chassis BD11
YOK-B11-002
CHF109.00
Auf Lager
+ −
Graphite front bumper brace BD11
YOK-B11-001G
CHF27.90
Auf Lager
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06R
CHF79.90
Auf Lager
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06B
CHF79.90
Auf Lager
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SAL
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager
+ −
Matte graphite upper deck set for YD-2S Sliderack
YOK-Y2-003SR
This is the upper deck set for the S series used in the YD-2SXIII. It comes with a 2.5mm thick matte graphite upper deck and aluminum parts for connecting to the front bulk and rear gearbox. * The front bulkhead is compatible with aluminum slide racks (Y2-202BH). Please note that it cannot be...
CHF55.90
Auf Lager
+ −
KUGEL ALU WORKS'95 8ST
ZC0401L
CHF14.00
Auf Lager bei Lieferant
Produkt wird in ca. 3 Werktagen an Sie versendet  
+ −
PULLEY FRONT (ONE-WAY - MR-4TC BD)
Z-BD-643
CHF5.00
Auf Lager bei Lieferant
Produkt wird in ca. 3 Werktagen an Sie versendet  
+ −
CHASSIS GRAPHITE WORKS'95
ZD0115
CHF171.35
Auf Lager bei Lieferant
Produkt wird in ca. 3 Werktagen an Sie versendet  
+ −
Special motor mount for YD-2Z series (red)
YOK-Y2-304ZSR
Special motor mount for YD-2Z series. The aluminum heat sink shape has a high cooling effect and efficiently cools the motor during drift driving, which tends to heat up. By rotating around the top shaft, the YD-2Z can select the motor position from 13 places depending on the chassis...
CHF34.90
Auf Lager
+ −
Special motor mount for YD-2Z series (purple)
YOK-Y2-304ZSP
Special motor mount for YD-2Z series. The aluminum heat sink shape has a high cooling effect and efficiently cools the motor during drift driving, which tends to heat up. By rotating around the top shaft, the YD-2Z can select the motor position from 13 places depending on the chassis...
CHF34.90
Auf Lager
+ −
Special motor mount for YD-2Z series (black)
YOK-Y2-304ZS
Special motor mount for YD-2Z series. The aluminum heat sink shape has a high cooling effect and efficiently cools the motor during drift driving, which tends to heat up. By rotating around the top shaft, the YD-2Z can select the motor position from 13 places depending on the chassis...
CHF34.90
Auf Lager
+ −
Aluminum Servo Mount for YD-2ZX (Purple)
YOK-Y2-203ZP
Aluminum servo mount for YD-2ZX. It is compatible with low profile servos and has a height of approximately 17 mm. The color is purple and comes in 2 pieces.
CHF32.50
Auf Lager
+ −
Aluminum Servo Mount for YD-2ZX (Black)
YOK-Y2-203Z
Aluminum servo mount for YD-2ZX. It is compatible with low profile servos and has a height of approximately 17 mm. The color is black and comes in 2 pieces.
CHF32.50
Auf Lager
+ −
Aluminum upper deck adapter for YD-2ZX (rear)
YOK-Y2-003ZAR
CHF15.90
Auf Lager
+ −
Upper bulkhead for BD-919 / BD10 / BD10LC (B) (F r
YOK-B10-32UB
Chamfered Front / Rear Upper Bulkhead [B] FR / RL for BD-10LC / BD-10 / BD919
CHF29.90
Auf Lager
+ −
YD-2S Rear Toe Control System
YOK-Y2-RTC
A new rear toe control system is now available that will dramatically improve the running performance of the YD-2S series! By installing a kingpin shaft on the rear hub carrier and connecting a linkage for toe control, it is possible to change the toe angle in response to suspension operation....
CHF139.90
Auf Lager
+ −
BD10F Front balance weight L / R 40g
YOK-B10-BWF40
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF65.00
Auf Lager
+ −
Karosserie 1:10 FWD Type-A
YOK-SP-FWDAB
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF57.90
Auf Lager
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF75.90
Auf Lager
+ −
High Grade O-ring for Shock 8stk.
YOK-YS-7HGC
(oil resistant / with poly slider / 8 pcs) This new type of O-ring provides the best performance as an oil seal for damper shafts. The soft material allows the shock shaft to slide easily, and the extremely oil-resistant silicon rubber material allows the O-ring to maintain its shape...
CHF9.90
Auf Lager
+ −
SLF Aluminum Big Bore shock set (Red) for YD-2
YOK-Y2SBBSR
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
Auf Lager
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSP
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
Nicht auf Lager
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBS
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
Auf Lager
+ −
Front bulkhead / Upper arm holder
YOK-Y2-302ZD
CHF21.50
Auf Lager
+ −
Titanium turnbuckle set for YZ-2 DTM3.1 / CAL3.1 (
YOK-Z2-TBS31
Titanium turnbuckle set for YZ-2 DTM3.1 / CAL3.1 (6 pieces / with wrench)
CHF42.90
Auf Lager
+ −
BL-EP6 Brushless speed controller (programmer incl
YOK-BL-EP6
It is a brushless speed controller that comes with a programmer and realizes a reasonable price while supporting each category of on, off, and drift. In addition to Yokomo's sensor-type brushless motors, it is also possible to drive general-purpose sensorless motors. Of course, it is recommended...
CHF89.90
Auf Lager
+ −
SP-03DV2 Programmable brushless servo (Red)
YOK-SP-03DV2R
The new servo "SP-03DV2" is equipped with a new program on the high-spec servo that has been used by many top drivers so far, and has faster speed, torque, and overwhelming holding power than before. In order to maximize the performance of the brushless motor, which is the key to operation, a...
CHF169.00
Auf Lager
+ −
SP-03DV2 Programmable brushless servo (Purple)
YOK-SP-03DV2P
The new servo "SP-03DV2" is equipped with a new program on the high-spec servo that has been used by many top drivers so far, and has faster speed, torque, and overwhelming holding power than before. In order to maximize the performance of the brushless motor, which is the key to operation, a...
CHF169.00
Auf Lager
+ −
Front steering block for YD-2 series
YOK-Y2-415S2
Resin steering block for RWD drift car YD-2 series. It has been updated for the new short suspension arm, and by installing the steering stopper in the tie rod mounting hole closest to the axle, the optimum turning angle can be obtained.
CHF7.90
Auf Lager
+ −
Body Mount Patch (5mm)
YOK-ZR-BMP5A
It is a patch that is attached to the back side of the body of the body mount hole to reinforce the mount hole and protect the paint. For body posts with a diameter of 5 mm.
CHF3.90
Auf Lager
+ −
Integrated lightweight bulkhead for YD-2 purple
YOK-Y2-302DPL
This is a front integrated bulkhead made of aluminum that can be used commonly with the YD-2 series. Of course, it is available in three anodized colors: black, red and purple. As with the previous parts, this part can greatly increase the strength of the front end, but it...
CHF52.90
Auf Lager
+ −
Integrated lightweight bulkhead for YD-2 rot
YOK-Y2-302DRL
This is a front integrated bulkhead made of aluminum that can be used commonly with the YD-2 series. Of course, it is available in three anodized colors: black, red and purple. As with the previous parts, this part can greatly increase the strength of the front end, but it...
CHF52.90
Auf Lager
+ −
Integrated lightweight bulkhead for YD-2 black
YOK-Y2-302DL
This is a front integrated bulkhead made of aluminum that can be used commonly with the YD-2 series. Of course, it is available in three anodized colors: black, red and purple. As with the previous parts, this part can greatly increase the strength of the front end, but it...
CHF52.90
Auf Lager
+ −
Narrow Graphite Main Chassis Set für YD-2R inline
YOK-Y2-002RXV
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF189.90
Auf Lager
+ −
YD-2Z Front Upgrade Set schwarz
YOK-Y2-FUSB
A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for...
CHF115.00
Auf Lager
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3
CHF11.90
Auf Lager
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF17.90
Auf Lager
+ −
Steel front lower suspension mount for YZ-2CAL 3.1
YOK-Z2-300FLS
CHF29.50
Auf Lager
+ −
Aluminum front lower suspension mount for YZ-2DTM3
YOK-Z2-300FLA
YZ-2DTM3.1 Standard parts aluminum front lower suspension mount. By swapping the front and back, the height of the suspin can be changed by 1 mm, and the roll center can be adjusted.
CHF29.50
Nicht auf Lager
Rear upper arm mount / roll bar holder / gearbox
YOK-Z2-300R31
Rear upper arm mount / roll bar holder / gearbox support for YZ-2 DTM3.1 / CAL3.1
CHF12.90
Auf Lager
+ −
Battery Holder/Radio Tray/Spur Gear Cover CA/DT3.1
YOK-Z2-118-31
CHF23.90
Auf Lager
+ −
Seitenplatten für YZ2-CAL3.1/DTM3.1
YOK-Z2-002S31
CHF13.90
Auf Lager
+ −
YZ-2DTM3.1 Hard main chassis (Dirt surface/Long ve
YOK-Z2-002D31
CHF105.00
Auf Lager
+ −
YZ-2CAL3.1 Hard main chassis (High grip surface/Lo
YOK-Z2-002C31
CHF105.00
Auf Lager
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (239)
Passend zu...
    Alle zeigen (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Alle zeigen (11)
Marke
    Alle zeigen (65)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags