ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Recommandés
48 Par page
Karosserie Seven65 1:7 Arrma Infraction/Limitless
BDGT7-S65
The body shell has been designed on the ARRMA® Infraction T V2 chassis. Also compatible for Limitless frame*. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing *...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF94.50
En stock
+ −
Karosserie AR8-GT3 1:7 Infraction/Limitless klar
BDGT7-R8
The body shell has been designed to fit the ARRMA® InfractionT V2 chassis. Also compatible for *LimitlessT model. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic washers) to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF117.90
En stock
+ −
Karosserie Bittydesign Type-6C F1 klar
BDF1-T6C
Product Features - Made with high quality and genuine polycarbonate Lexan® - Included a complete kit that contain a white plastic helmet and proper screws for assembly and fix it to the body - Produced only Light Weight version, thickness of material 0,75mm - Sold clear with...
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
En stock
+ −
Karosserie Bittydesign IRON Truck 190mm klar 1:10
BDTR-190IRO
The IRON project has been made with the collaboration of expert industrial designer, it took several months to develop a product that can combine at best a stunning look and best performance at same time. Developed for maximum performance The design of the IRON body shell represents the...
AuswahlhilfeRace-Truck 190mm Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF54.90
En stock
+ −
Karosserie CA45 1:10 FWD klar 0,7mm
BDFWD-CA45
Product Features The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan®...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.50
En stock
+ −
Karosserie M410 TC 190mm light klar
BDTC-190M410
Designed with the collaboration of a car designer renowned internationally and tested with the help of our worldwide team drivers who participated in the development of a product that look stunning and with performance at the top of the class.   Tested for several months both...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Rupture de stock
Karosserie ARES-1 1:10 190mm GT klar
BDGT-190AS1
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
CHF43.90
En stock
+ −
Karosserie 1:7 JOTA für Arrma Felony/Infration/Lim
BDGT7-JTA
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT platform. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock
+ −
Karosserie HC-F 1/10 190mm clear für FWD
BDFWD-190HCF
MaterialLexan AuswahlhilfeFWD 1:10, 190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF35.90
Rupture de stock
Karosserie No-Prep Dragracing 1:10
BDDG-ZL21
This project was born from the desire to create an extraordinary product developed specifically for drag races, "No Prep Street Outlaw" and "No Prep Street 13.5 stock" categories. Product Features: The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
En stock
+ −
Karosserie Divina 1:8 Arrma Vendetta klar
BDAR8-DIV
The body shell has been designed on the ARRMA® VendettaT chassis. Also compatible for Infraction 4WD MEGAT frame. Made with high quality and genuine polycarbonate Lexan®, 1mm thick Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
En stock
+ −
Karosserie TC Bittydesign Ascari 190mm 1:10
BDTC-190ASC
Tested for several months both indoor and even outdoor on different types of carpet and tarmac, the ASCARI body shell represent a new reality for drivers all around the world who race at top levels and always pretend to obtain the best result with their models.   Developed for...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF27.90
En stock
+ −
Karosserie Hiberya-M 1:10 M-Chassis 210-225 klar
BD210225-HYB
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.90
En stock
+ −
Karosserie Hiberya 1:10 FWD 190mm klar
BDFWD-190HBY
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring). Made with high quality and genuine polycarbonate Lexan® Included in the kit...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF34.90
En stock
+ −
Karosserie Agata 1:10 GT 190mm klar
BDGT-190AGT
AGATA, a new body shell contender for the 1/10 GT division The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers. Tested over several months...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF38.90
En stock
+ −
Karosserie Seven65 1:8 GT klar
BDGT8-S65
Fits all the chassis with 321-325-330mm wheelbase. A new point of referenece for the 1/8 GT class, Seven65 body is a game changer. Low centre of gravity, realism and pure performance, all in one! The body shell meet the specifications needed to participate in any 1/8 GT race in the...
MaterialLexan AuswahlhilfeRalleygame Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
En stock
+ −
Karosserie ROCK1 für 313mm Crawler klar
BDCR-RK1
Bittydesign ROCK1 - 1/10 clear body for 313mm (12,3") Rock Crawler, Pre-Cut ROCK1, our first ever body shell for 1/10 Rock Crawlers This project was born from the desire to create a universal product that can be installed on all models with a 313mm wheelbase, compatible with both 106...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF52.90
En stock
+ −
Karosserie HC-M 1/10 M-chassis für 210-225mm
BDFWD-HCM
HC-M, a new body shell contender body shell for the 1/10 M-chassis FWD class The HC-M project was born from the desire to offer to all the rc enthusiast a new top quality body shell for the M-chassis cars with 210-225mm wheelbase. Tested for several months the product combine a stunning...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF32.00
En stock
+ −
Karosserie eptron 1:10 TC 190mm klar
BDTC-190ETR
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic washers to fix...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
En stock
+ −
Karosserie ZL-21N 1:7 Arrma Infraction/Limitless
BDAR7-ZL21N
Product  Features The ZL-21N body shell has been designed to fit the ARRMA ®  Infraction ™  V2 chassis . Also compatible for *Limitless™ model. Made with  high quality and genuine polycarbonate  Lexan®, 1.5mm thick Included in the kit a...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF114.90
En stock
+ −
Karosserie Bittydesign Type-6R F1 klar
BDF1-T6R
Tested for several months in Italy, both outdoor on different layout included also the ETS track of Riccione and indoor on multiple carpets with different level of grip, the body has undergone many changes required to provide a product that responds better to our handling's expectations on...
AuswahlhilfeFormel 1 Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Rupture de stock
Karosserie Bittydesign CA45M 1:10 M-Chassis
BDFWD-CA45M
This project was born from the desire to expand our range of bodies for the 1/10 MINI category by offering a design that reproduces the volumes of the C segment. The CA45-M body represents the best result of performance and aesthetics into the same product, a great mix with modern and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
En stock
+ −
Karosserie 1:7 Viper für Arrma Felony klar
BDGT7-VPR
The body shell has been designed to fit the ARRMA® FelonyT chassis. Also compatible for *Infraction/LimitlessT models. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock
+ −
Karosserie Hyper-M 1:10 M-Chassis klar 210-225
BDTC-HYPM
The body shell meet the specifications needed to participate in any 1/10 M-Chassis race in the world and it's compatible with all the model car who have a 210-225mm wheelbase. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and...
MaterialLexan AuswahlhilfeM-Chassis Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF29.90
En stock
+ −
Karosserie ROCK1 klar für Vanquish VS4-10/Fordyce
BDCR-RK1-VS4
This project was born out of the desire to create a specially developed product for one of the crawler model that has quickly become a true milestone in scale crawling: Vanquish VS4-10. Our ROCK1 is by far the first and only aftermarket body designed with the direct collaboration of Vanquish...
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF89.90
En stock
+ −
Foam Bumper für BDGT7-S65
BDARA-FOMS65
CHF19.90
En stock
+ −
Karosserie TC Hyper-HR 190mm lightweight klar
BDTC-190HYPHR
Product Features The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF27.90
En stock
+ −
Karosserie AR8-GT3 1:10 190mm klar
BDGT-190R8
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. Made with high quality and genuine polycarbonate Lexan® Included in the kit a complete set of screw, nuts and large plastic...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF42.90
En stock
+ −
Karosserie Hyper GT8 325-330mm Radst. 1:8 klar
BDGT8-HYP
HYPER-GT8, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the 1/8 scale GT class with MAXIMUM performance with an eye always aimed also at aesthetics. The HYPER-GT8 body represents the best result of PURE...
AuswahlhilfeFlachbahn MaterialLexan Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF54.00
En stock
+ −
Karosserie Seven20 1/10 GT 190mm klar
BDGT-190S20
Seven20, a new contenderbody for the 1/10 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The Seven20 body represents the best result of performance...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF37.90
En stock
+ −
Karosserie Rally 190mm 1:10 klar
BDRX-190P10R
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both "touring" chassis as well the ones created specifically for the rally category. Compatible with Tamiya TT-02 chassis (in all its variants). Made with high quality and genuine polycarbonate Lexan® Included in the kit a...
CHF48.90
En stock
+ −
Karosserie Short Course "Black Hawk" 1:10
BDSC-BLHK
Developed for everyone
AuswahlhilfeShort Course Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerBittydesign
CHF44.90
En stock
+ −
Karosserie M410 TC 190mm light klar cutted Yokomo
BDTC-190M410-YOK
BDTC-190M410-YOK: Pre-cut for Yokomo BD8 '17 Bye bye scissors and dremel, our ??% Pre-Cut M410 body shell has finally arrived! High quality and perfect CNC cutting - 5mm forward for best performance - will remove the most annoying part of the preparation of the body. Unpacking the product,...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF39.90
En stock
+ −
Karosserie Interieur klar für Crawler
BDCR-RK1-DC
Bittydesign BDCR-RK1-DC - Interior cockpit/seats for ROCK1 Crawler 1/10 body The interior is made of sturdy transparent polycarbonate that will allow you to have fun painting it in the colors and style of your choice an accessory particularly suitable for the most demanding enthusiasts for...
AuswahlhilfeCrawler Massstab1:10 EinsatzCrawler/Scaler HerstellerBittydesign
CHF32.90
En stock
+ −
Karosserie No Prep Drag Racing 1:10 M-550 klar
BDDG-M550
The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. Made with high quality and genuine polycarbonate Lexan®, 1mm thick * for installation on SlashT 2wd chassis it is necessary to...
MaterialLexan AuswahlhilfeDragster Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF64.90
En stock
+ −
Karosserie M410 TC 190mm light klar cutted Xray
BDTC-190M410-XRY
Bye bye scissors and dremel, our ??% Pre-Cut M410 body shell has finally arrived!
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF39.90
Rupture de stock
Karosserie M410 TC 190mm Ultra light klar
BDTC-190M410ULT
New M410 ULT, to add speed performance speed add lightness The M410 ULT project includes all our experience and know-how gained in over 10 years of presence on the racetrack, designed with the collaboration of a car designer renowned internationally and tested with the help of our...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF28.50
En stock
+ −
Karosserie GT12 Agata 1:12 Supastox klar
BDGT12-AGT
AGATA, a new body shell contender body shell for the GT12 division The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers. Tested for several months the...
Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road, On-Road Drift Lackierungunlackiert HerstellerBittydesign
CHF26.90
En stock
+ −
Karosserie 1:7 Destroyer für Arrma Infraction/Limi
BDMC7-DSTY
DESTROYER  is pure arrogance for your Infraction! This project was  born from the desire to create an extraordinary body shell developed  specifically for ARRMA. Premium Quality  first of all Our philosophy leads us not to...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:7 EinsatzOn-Road Lackierungunlackiert
CHF109.90
En stock
+ −
Karosserie AR8-GT3 1:8 325mm SWB
BDGT8-R8
AR8-GT3, a new contenderbody shellcontender for the 1/8 GT division This project was born from the desire to offer to the enthusiast a body shell that could best combine maximum performance together with the realism of a true race supercar. The AR8-GT3 body represents the best result...
MaterialLexan AuswahlhilfeGT8 Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF49.90
En stock
+ −
Karosserie JP8HR 1:10 TC 190mm Light Weight
BDTC-190HR
The ALL NEW ultra downforce body shell has been developed with the collaboration of our wordwide team drivers, who participated to the several stages of the project. The JP8HR includes all of our experience gained in over 10 years of presence on the racetrack, and the final version of the body...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
Rupture de stock
Karosserie GT12 Seven20 für 1:12 Supastox klar
BDGT12-S20
The body shell meet the specifications needed to participate in any GT12 race in the world, it's BRCA homologated. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts and...
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF29.90
En stock
+ −
Karosserie Force 1:8 Buggy für MP9 TKI2-3 klar
BDFRC-K003
Steering response improved respect the stock std. cab body   Improved engine air flow thanks to the cab forward design Specially designed side scoop to allow free movement of the throttle/brake linkages The Force body is made with genuine Lexan polycarbonate, 1mm...
AuswahlhilfeBuggy Massstab1:8 EinsatzOff-Road Lackierungunlackiert HerstellerBittydesign
CHF29.90
En stock
+ −
Karosserie ROBOX 1:12 Pan Car light weight klar
BD12-RBX
The body shell meet the specifications needed to participate in any 1/12 Pan-car race in the world, it's EFRA and IFMAR homologated. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Produced in Ultra Lite Weight...
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF27.90
Rupture de stock
Karosserie AR8-GT3 1:8 360mm LWB klar
BDGT8-R8LW
AR8-GT3, a new contenderbody shellcontender for the 1/8 GT division The project was born with the intention of creating a body shell for the GT class 1/8 scale long wheelbase (LWB) with an eye always turned to aesthetics and realism. The AR8-GT3 body is in fact our best combination of...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF79.90
En stock
+ −
Car Stand, Ammo rebuild Station
BDCSTD-1518
Obsessive attention to details, 100% Made in Italy   made with strong and durable plastic material high quality laser cut shape and holes side logo and upper sigles laser engraved 4mm thickness size 24,5x15x9,1cm protective shaped foams included
CHF32.50
En stock
+ −
Heckflügel 1:7 GT klar
BDARA-R8W
CHF29.90
En stock
+ −
Karosserie ARES-1 GT12 klar
BDGT12-AS1
The ARES-1 body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category. Made with high quality and genuine polycarbonate Lexan® Produced in Light Weight version, thickness of material 0,75mm Included in the kit a complete set of screw, nuts and...
CHF28.90
En stock
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (239)
Compatibilité
    Afficher tout (15)
Auswahlhilfe
    Afficher tout (28)
Material
Prix

CHF  –  CHF

  • ‎CHF5.9
  • ‎CHF117.9
Massstab
    Afficher tout (18)
Einsatz
Lackierung
Marke
    Afficher tout (65)
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags