Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
YOK-Y2-415SAL
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager
+
CHF79.90
Auf Lager
+
CHF15.90
Auf Lager
+
CHF39.90
Auf Lager
+
CHF39.90
Auf Lager
+
YOK-SD-PS13B
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert HerstellerYokomo
CHF46.90
Auf Lager
+
CHF39.90
Auf Lager
+
YOK-B7-2014S
 
CHF79.00
Auf Lager
+
YOK-B10-002A
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF124.90
Auf Lager
+
YOK-B7-32L15
 
CHF38.90
Auf Lager
+
CHF21.90
Auf Lager
+
YOK-Z2-008F3
F3 Outer pin spec
CHF11.00
Auf Lager
+
CHF13.90
Auf Lager
+
YOK-Y2-118CG2
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF75.90
Auf Lager
+
CHF13.90
Auf Lager
+
CHF18.90
Auf Lager
+
CHF74.90
Auf Lager
+
CHF16.90
Auf Lager
+
CHF49.90
Auf Lager
+
CHF49.90
Auf Lager
+
YOK-Z2-DTMWB
MaterialLexan AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF24.90
Auf Lager
+
YOK-B9-010RA
(44.5mm Aluminum bone)
CHF49.90
Auf Lager
+
CHF49.90
Auf Lager
+
YOK-YT-CS1
Lexanschere Fluorine processing Scissor 160mm
CHF16.90
Auf Lager
+
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
Auf Lager
+
CHF24.90
Auf Lager
+
CHF12.20
Auf Lager
+
YOK-TW-SS86
 
Auswahlhilfe190mm Touring MaterialGummi Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road
CHF9.90
Auf Lager
+
CHF6.40
Auf Lager
+
CHF8.50
Auf Lager
+
YOK-Y2-016MGR
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
Auf Lager
+
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
Auf Lager
+
CHF9.50
Auf Lager
+
CHF46.90
Auf Lager
+
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
Auf Lager
+
YOK-Y2-008RAS
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July.
CHF99.90
Auf Lager
+
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
Auf Lager
+
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager
+
CHF19.90
Auf Lager
+
CHF25.90
Auf Lager
+
CHF34.50
Auf Lager
+
CHF27.50
Auf Lager
+
YOK-SD-1093B
 
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert HerstellerYokomo
CHF57.50
Nicht auf Lager
CHF9.65
Auf Lager
+
YOK-RD-202SC
This slide rack set can be bolted on to the RD2.0.The servo can be mounted closer to the rear via the center crank, increasing the rear load and stability.
CHF134.90
Auf Lager
+
CHF11.50
Nicht auf Lager
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
Auf Lager
+
CHF32.90
Auf Lager
+
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (239)
Passend zu...
    Alle zeigen (63)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Alle zeigen (11)
Marke
    Alle zeigen (65)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags