ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Articles les plus récents d'abord
48 Par page
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
En stock  
+ −
Off-road body for SO series (standard)
YOK-Z2-101S2
CHF26.90
En stock  
+ −
Alum Adjustable Front Axle for SO2.0
YOK-Z2-010AFA
CHF16.90
En stock  
+ −
Steel S2 Chassis weight (26g) for SO2.0
YOK-Z2-002WS
CHF15.90
En stock  
+ −
Alum. S2 Chassis weight (9g) for SO2.0
YOK-Z2-002WA
CHF16.90
En stock  
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF89.90
En stock  
+ −
Aluminum clamp type servo horn for YD-2ZX
YOK-Y2-204Z26
Aluminum servo horn for YD-2ZX. It has a shape that matches the mounting method where the servo is placed directly on the main chassis, and is a type that is fixed with a clamp through an adapter that matches the servos of each company.
CHF21.00
En stock  
+ −
Aluminum motor mount for BD10F
YOK-B10-302MF
Aluminum motor mount for BD10F. Backlash can be adjusted by sliding the joint with the center mount.
CHF22.90
En stock  
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF39.90
En stock  
+ −
Stabidraht hinten 1mm BD11/BD12
YOK-B11-412R0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Stabidraht hinten 0.9mm BD11/BD12
YOK-B11-412R09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Front Stabidraht 1.0mm BD11/BD12
YOK-B11-412F0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Front Stabi Draht 0.9mm BD11/BD12
YOK-B11-412F09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
En stock  
+ −
Chassis Schutzfolie 200x390mm
YOK-ZC-CPS
Protective sheet that is attached to the back of the chassis to protect the chassis from road surface interference.The slightly thicker material and stronger adhesive surface ensure a firm bond. The price is reasonable for periodic replacement. It can be used for speed category,...
CHF3.90
En stock  
+ −
Lipo Bag Team Yokomo
YOK-YB-LSBB
Battery bag for charging and storing Li-po batteries. The flame-retardant material prevents the spread of fire in the unlikely event that the battery catches fire. It has a safe large capacity and can hold 6 short batteries, making it convenient for storage and transportation. Internal...
CHF23.90
Rupture de stock
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
En stock  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF44.90
En stock  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
En stock  
+ −
Belt tension adjustment cam for BD10/9 (2 pieces m
YOK-B10-BTCBA
CHF19.90
En stock  
+ −
RC MAKER Kohlefaser Tweak Stangen Set für Yokomo B
RCM-BD11-TS
RC MAKER Kohlefaser Tweak Stangen Set für Yokomo BD11 Da das neue Design des BD11 vorne keine konventionellen Dämpferbrücke hat, verwendet der Tweak Stick Verlängerungsplatten, die gleichmäßigen Druck auf die Bulkheads links und rechts, vorne und hinten ausüben. Der Tweak-Stick hilft...
CHF49.90
En stock  
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF59.90
En stock  
+ −
Graphite rear stiffener plate für BD11/BD12
YOK-B12-003RSP
CHF21.00
En stock  
+ −
Graphite rear upper deck 1.5mm für BD12
YOK-B12-003RS
CHF23.90
En stock  
+ −
Graphite front upper dekc BD12 1.5mm
YOK-B12-003FS
CHF24.90
En stock  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
En stock  
+ −
AXON TCS 90T spur gear (hard)
YOK-SG-A6490
CHF7.50
Rupture de stock
Shock cap/shock end for BD12
YOK-B12-S6
CHF7.50
En stock  
+ −
Shock shaft for BD12
YOK-B12-S5S
CHF7.50
En stock  
+ −
Aluminum shock cylinder for BD12
YOK-B12-S4S
CHF24.90
En stock  
+ −
Aluminum upper shock cap nut for BD12
YOK-B12-S4C1
CHF9.70
En stock  
+ −
Aluminum shock adjust nut/O ring for BD12
YOK-B12-S4AJ
CHF10.50
En stock  
+ −
Aluminum spring cup for BD12 (bearing specificatio
YOK-B12-S3S
CHF10.50
En stock  
+ −
Shock shaft guide for BD12
YOK-B12-S2B
CHF13.50
En stock  
+ −
Graphite body stiffener plate for BD12
YOK-B12-413SP
CHF16.90
En stock  
+ −
Graphite molded front steering hub carrier BD12
YOK-B12-413G
CHF17.90
En stock  
+ −
Aluminum motor mount for BD12
YOK-B12-302M
CHF76.90
En stock  
+ −
Brass center stiffener for BD12
YOK-B12-302CSB
CHF35.90
En stock  
+ −
Graphite center stiffener for BD12
YOK-B12-302CS
CHF19.90
En stock  
+ −
Graphite rear shock tower for BD12
YOK-B12-018
CHF26.90
En stock  
+ −
Graphite front shock tower BD12
YOK-B12-017
CHF27.90
En stock  
+ −
Graphite rear upper deck BD12
YOK-B12-003R
CHF24.90
En stock  
+ −
Graphite front upper deck BD12
YOK-B12-003F
CHF24.90
En stock  
+ −
Chassis Platte BD12 Carbon
YOK-B12-002
CHF109.90
En stock  
+ −
Titanium Lower Shock Mount for BD11
YOK-B11-S9T
CHF12.90
Rupture de stock
F/R body mount for BD9/10/11 (hard)
YOK-B11-016H
CHF9.90
En stock  
+ −
Drift LTS Rear Spring 1.0×48mm×10.0turns
YOK-D-188
CHF11.90
En stock  
+ −
Drift LTS Front Spring 1.0×48mm×9.0turns
YOK-D-187
CHF11.90
En stock  
+ −
Drift LTS Front Spring 0.9x45x8.5turns
YOK-D-186
CHF11.50
En stock  
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (244)
Compatibilité
    Afficher tout (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Afficher tout (28)
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Afficher tout (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
Marke
    Afficher tout (69)
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags