P00663B
 
System/KompatibilitätParma HerstellerParma
CHF179.90
Auf Lager
+
P00525
Nickel plated brass pinion. The 64 pitch with finer teeth means better mesh, less friction and more speed. Must be used with 64 Pitch Slot Sprocket Spur gear or similar. This is a card of six individually bagged gears. Photo shown is generic for identification purposes, this part number is for the specific gear (pitch/tooth count) described in heading.
System/KompatibilitätParma HerstellerParma
CHF4.50
Auf Lager
+
P00502
The Super 16D is the next step up from our DeathStar 16D motors. They feature a smaller factory balanced armature with .490" stack, 60 turn/28 gauge wire and timing is set at 25-30 degrees. They include a tamper resistant seal, which can be removed, but not reused. This makes tech simple, great for handout motor classes. Includes 9 Tooth/48 Pitch Nickel Plated Brass Pinion Gear #520D. All replacement parts are available.
System/KompatibilitätParma HerstellerParma
CHF20.80
Nicht auf Lager
P00270C
Our top of the line controller features an anodized turbo frame, double barrel wet wound epoxy coated resistor with aluminum heat sink and silver plated wiper arm/contact pads to ensure full brake and full power.up 7, Group 12, Group 27 class racing.
System/KompatibilitätScalextric analog HerstellerParma
CHF139.00
Auf Lager
+
P00314R
Double Barrel design with full pink coating.
System/KompatibilitätParma HerstellerParma
CHF24.80
Auf Lager
+
P00515
 
System/KompatibilitätParma HerstellerParma
CHF19.90
Nicht auf Lager
5
NIN80612
19300 U/min
System/KompatibilitätNinco analog, Ninco digital HerstellerNinco
CHF23.50
Auf Lager
+
P00314H
Double Barrel design with full pink coating. Replacement or option for all 1/24 Turbo Controllers. Available in 1-4 OHMs for large commercial style tracks, etc. 1 OHM = Instant Full Power / Brake. 2-4 OHM will give you more "gas pedal/throttle" when speeding up / braking. 15-45 OHM are used for 1/32 Home Set/Club Tracks and have more "gas pedal/throttle" when speeding up / braking.
System/KompatibilitätParma HerstellerParma
CHF20.70
Auf Lager
+
CARRERA89772
CARRERA DIGITAL 132
System/KompatibilitätCarrera Digital 132, Carrera Evolution HerstellerCARRERA
CHF6.90
Auf Lager
+
CHF24.90
Auf Lager
+
P00290C
Replacement or optional Single Barrel resistor for Home Set Plus Controllers with Full Blue Coating. Can also be used in Economy or Sebring Controllers.
System/KompatibilitätParma HerstellerParma
CHF19.90
Auf Lager
+
NIN80603
18100 U/min
System/KompatibilitätNinco analog, Ninco digital HerstellerNinco
CHF23.50
Auf Lager
+
P00397
This new nylon design does not conduct heat like the older metal trigger.
System/KompatibilitätParma HerstellerParma
CHF16.20
Auf Lager
+
P00452I
EDGE RTRs - Our fully assembled ready to race cars feature Aluminum 3/4" Fronts (#672B), Smoothie Rears (#70711) And King Crown Gear (#70155).
System/KompatibilitätParma HerstellerParma
CHF79.00
Auf Lager
+
P00716
6.35mm x 33m
System/KompatibilitätParma HerstellerParma
CHF22.90
Auf Lager
+
P00314P
Double Barrel design with full pink coating.
System/KompatibilitätParma HerstellerParma
CHF23.90
Auf Lager
+
P00314Q
 
System/KompatibilitätParma HerstellerParma
CHF22.90
Auf Lager
+
P00491
High performance 18 gauge silicone wire with soldered brass guide clips for upgrading RTR cars, etc. Cut each piece in two for one car. Six bags per card, enough for 12 individual pieces to upgrade 6 cars.
System/KompatibilitätParma HerstellerParma
CHF19.90
Auf Lager
+
P00516
Use our hardened gear puller for removing motor pinion gears on all slot cars. A must have item for any racer or enthusiast
System/KompatibilitätParma HerstellerParma
CHF16.90
Nicht auf Lager
P00314B
Double barrel Drag Racing resistor is designed for 40% quicker response, compared to a standard 1 OHM. The fully coated resistor fits PARMA Turbo Controllers.
System/KompatibilitätParma HerstellerParma
CHF17.90
Auf Lager
+
P01035CP
New painted and trimmed .015 thick F5 replacement bodies are available with multi-color paint schemes and include a die cut detail decal sheet that includes a grille, headlights, fender decals and numbers. These bodies can not be specified in colors, you will receive a random selection with random Type C-T decal sheet. If you want a particular style grille and headlight style, order an additional decal sheet at time of ordering.
System/KompatibilitätParma HerstellerParma
CHF11.90
Auf Lager
+
OVE-XDF
 
System/KompatibilitätNinco analog, Carrera Evolution, Carrera Exclusiv HerstellerDiverse
CHF12.90
Auf Lager
+
P00758
 
System/KompatibilitätParma HerstellerParma
CHF5.90
Auf Lager
+
OVE-XF5S
 
System/KompatibilitätNinco analog, Scalextric analog, Carrera Evolution, Carrera Exclusiv HerstellerDiverse
CHF8.60
Auf Lager
+
NIN80109
 
System/KompatibilitätNinco analog, Ninco digital HerstellerNinco
CHF9.50
Auf Lager
+
P00484
 
System/KompatibilitätParma HerstellerParma
CHF6.50
Auf Lager
+
P00597
Design your drag chassis with a 1.75"-11" Wheel Base.
System/KompatibilitätScalextric analog HerstellerParma
CHF32.50
Auf Lager
+
P00520C
High quality nickel plated brass motor pinions. These are press-on style and replacements for stock 16D motors, etc. Photo shown is generic for identification purposes, this part number is for the specific gear (pitch/tooth count) described in heading.
System/KompatibilitätParma HerstellerParma
CHF1.30
Auf Lager
+
OVE-XF3G
 
System/KompatibilitätCarrera Exclusiv, Ninco analog, Scalextric analog, Carrera Evolution HerstellerDiverse
CHF8.80
Auf Lager
+
P00314G
Double Barrel design with full pink coating.
System/KompatibilitätParma HerstellerParma
CHF23.50
Auf Lager
+
P00527
 
System/KompatibilitätParma HerstellerParma
CHF3.80
Auf Lager
+
P00520B
High quality nickel plated brass motor pinions. These are press-on style and replacements for stock 16D motors, etc. Photo shown is generic for identification purposes, this part number is for the specific gear (pitch/tooth count) described in heading.
System/KompatibilitätParma HerstellerParma
CHF1.40
Auf Lager
+
P00669
Used to space the guide flag on Sprint/Indy/Narrow Flexi Cars, etc. Can be used on The Blade to change ride height. Package of 6 pieces.
System/KompatibilitätParma HerstellerParma
CHF3.20
Auf Lager
+
P00637
 
System/KompatibilitätParma HerstellerParma
CHF19.50
Auf Lager
+
OVE-XF3B
 
System/KompatibilitätNinco analog, Scalextric analog, Carrera Evolution, Carrera Exclusiv HerstellerDiverse
CHF8.80
Auf Lager
+
OVE-XFMW
 
System/KompatibilitätNinco analog, Scalextric analog, Carrera Evolution, Carrera Exclusiv HerstellerDiverse
CHF8.80
Auf Lager
+
P00520D
High quality nickel plated brass motor pinions. These are press-on style and replacements for stock 16D motors, etc. Photo shown is generic for identification purposes, this part number is for the specific gear (pitch/tooth count) described in heading.
System/KompatibilitätParma HerstellerParma
CHF1.80
Auf Lager
+
P00555
 
System/KompatibilitätParma HerstellerParma
CHF6.90
Auf Lager
+
P00487
Our high quality, aluminum handle allen drivers are black anodized for years of service. This 5/64" driver is designed for slot car motor screws, gears set screws, etc.
System/KompatibilitätParma HerstellerParma
CHF11.70
Auf Lager
+
OVE-XF3S
 
System/KompatibilitätNinco analog, Scalextric analog, Carrera Evolution, Carrera Exclusiv HerstellerDiverse
CHF8.80
Auf Lager
+
P00641
 
System/KompatibilitätParma HerstellerParma
CHF9.90
Auf Lager
+
OVE-XR20
 
System/KompatibilitätCarrera Exclusiv, Carrera Evolution, Ninco analog, Scalextric analog HerstellerDiverse
CHF3.50
Auf Lager
+
OVE-XR30
 
System/KompatibilitätCarrera Exclusiv, Carrera Evolution, Scalextric analog, Ninco analog HerstellerDiverse
CHF3.90
Auf Lager
+
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller
Preis

CHF  –  CHF

  • ‎CHF1.3
  • ‎CHF179.9
System/Kompatibilität
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 50.-

Bestellung auf Rechnung

Bestellen Sie auf Rechnung

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags