ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
R. Shock Body
YOK-YS-4L-8
CHF14.50
Auf Lager  
+ −
F.shock body
YOK-YS-4S-8
CHF13.90
Auf Lager  
+ −
Light Unit Plastic Parts (ORC Z33)
YOK-SD-Z33LA
CHF7.10
Auf Lager  
+ −
Clear Lexan Body for RO1.0
YOK-Z2-101RO
This is the standard RO1.0 polycarbonate body. To use, please cut off the excess and paint it with polycarbonate paint. *The photo is an example of how to paint the model. The product is made of clear polycarbonate, so please prepare a dedicated spray paint separately. *Window masking...
CHF23.10
Auf Lager  
+ −
Rear Hub Carrier for RO1.0
YOK-Z2-415R1
This is a standard plastic rear hub carrier for the RO1.0. It comes in a set of two, with the same shape for the left and right.
CHF10.30
Auf Lager  
+ −
Molded Shock Towers for RO1.0
YOK-Z2-017S
Standard shock tower for RO1.0. Front and rear set.
CHF11.40
Auf Lager  
+ −
Tungsten 3/32 balls for differential (14 pieces)
YOK-Z2-505TA
These are ultra-high-precision tungsten carbide differential balls. The precision of the ball surface improves the smooth operation of the differential and makes it highly wear-resistant. This product comes in a pack of 14, perfect for the Z2-500 ball differential used on the YZ-2 and YZ-4.
CHF12.80
Auf Lager  
+ −
Aluminum Steering Bell Crank Set for RO1.0/SO1.0
YOK-Z2-201SBA
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF74.90
Nicht auf Lager
Molded Main Chassis for RO1.0
YOK-Z2-002RO
This is the standard main chassis for the RO1.0. It is a one-piece resin main chassis that provides moderate flexibility to improve driving stability.
CHF32.50
Nicht auf Lager
Graphite RC Unit Tray YZ-2T/DTM3/CAL3
YOK-Z2-002MTCA
This is a graphite radio plate to be used in place of the plastic radio tray on the YZ-2T/DTM3/CAL3. It is lightweight but has higher rigidity compared to the standard plastic tray, allowing for smoother cornering by reducing unintentional front snagging.
CHF12.80
Nicht auf Lager
Aluminum motor mount for YZ-2T
YOK-Z2-304TA
This is an aluminum motor mount for the YZ-2T 2WD racing truck. It is black anodized with beveled edges.
CHF29.90
Auf Lager  
+ −
"X30" Shock Body (Rear) for MO1.0
YOK-S4-S4L13
This is an aluminum large size cylinder for a F13mm big bore shock absorber that fits the rear of the MO1.0. 1 piece included.
CHF12.50
Auf Lager  
+ −
"X30" 13 Shock Body (Rear/Short) for SO2.0/MO2.0
YOK-S4-S4M13
This is an aluminum M-size cylinder for F13mm big bore shocks. 1 piece included.
CHF12.50
Nicht auf Lager
"X30" 13 Shock Body (Front) for SO2.0/MO2.0
YOK-S4-S4S13
This is an aluminum small size cylinder for F13mm big bore shocks. Pack of 1.
CHF12.50
Auf Lager  
+ −
Aluminum Anti-Roll Bar Ball (Hard/2pcs)
YOK-ZC-206AHA
Aluminum ball studs for use with stabilizers, etc. The surface is hard anodized for high durability. Pack of 2.
CHF6.80
Auf Lager  
+ −
M2x6mm Button Head Screw (10pcs)
YOK-ZC-BH26A
M2x6mm button head screw (f4.2 head, pack of 10)
CHF4.60
Auf Lager  
+ −
Steel M3 Flanged Lock Nut (4pcs)
YOK-ZC-N3FLS
A 3mm steel flange nut. The back of the flange has a serrated groove, allowing you to securely lock plastic parts. Pack of 4.
CHF3.40
Auf Lager  
+ −
O-Ring for YZ-870C Shock Cap 2mm (8pcs)
YOK-YS-7B2
O-rings for drain screws used on aluminum shock caps for YZ-870C.The inner diameter is F2mm and comes in packs of 8.
CHF3.40
Auf Lager  
+ −
Aluminum Shock Cap for YZ-870C (2pcs)
YOK-YZ-S8A
This aluminum shock cap fits the YZ-870C shock.The drain screw makes it easy to assemble the aeration system, and the look is close to the original.
CHF18.80
Auf Lager  
+ −
"X" Type Long Life O-Ring (8pcs)
YOK-YS-7SX
Silicone O-rings with a new material for longer life.The ring part has an X-shaped cross section to prevent oil leakage while ensuring smooth operation, further enhancing suspension performance. 8 pieces/pack.
CHF10.30
Auf Lager  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF12.80
Auf Lager  
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF41.00
Auf Lager  
+ −
Turnbuckle Upper Arm Rod End for MS1.0
YOK-MS-008TR
This is a replacement plastic part for the turnbuckle upper arm, an optional part for MS1.0
CHF9.90
Auf Lager  
+ −
Titanium Turnbuckle 75mm (1pcs)
YOK-ZC-TB75T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF14.80
Auf Lager  
+ −
Titanium Turnbuckle 65mm (2pcs)
YOK-ZC-TB65T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF12.80
Auf Lager  
+ −
Titanium Turnbuckle Set for RS1.0 (7pcs)
YOK-RS-TBS10
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF33.30
Auf Lager  
+ −
Titanium coated Shock Shaft for MS1.0
YOK-MS-S5T
Shock Shafts for MS1.0 with scratch-resistant titanium carbide coating. Length ist 19.1mm and comes in a pack of two.
CHF13.70
Auf Lager  
+ −
Graphite Lightweight front lower suspension Arm
YOK-B12-008FR
Graphite Lightweight front lower suspension arm (right) +0.5mm for BD12/11 This lightweight graphite suspension arm has been made lighter than before by changing the cut line, and has further improved maneuverability and traction. Compared to the standard suspension arm of the BD12, it is...
CHF36.90
Auf Lager  
+ −
Alu Shim 3x6x6 (Black, 8pcs)
YOK-ZC-A3660B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Alu Shim 3x6x5 (Black, 8pcs)
YOK-ZC-A3650B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Alu Shim 3x6x4 (Black, 8pcs)
YOK-ZC-A3640B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Rear Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-827Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF9.90
Auf Lager  
+ −
Front Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-821Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF8.90
Auf Lager  
+ −
Caster Measuring Jig for MS1.0
YOK-YT-CMJ
This tool is attached to the steering block to facilitate caster measurement when measuring MS1.0 alignment. Compatible with various touring car alignment gauges.
CHF10.30
Auf Lager  
+ −
MO2.0 Axle for Double Joint Universal
YOK-MO-010FWA
Replacement axle for front double-joint universal released as an optional part for MO2.0. 1 piece.
CHF6.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF23.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Suspension Arm
YOK-Z2-008R3H
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves turning performance.
CHF20.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Rear (White)
YOK-YZ-827W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the useof current 2.2-inch size tires while retaining the YZ-870C's distinctivewheel hubs, making it possible to choose the best tires from a variedlineup for a variety of surfaces! The...
CHF9.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Front (White)
YOK-YZ-821W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the use of current 2.2-inch size tires while retaining the YZ-870C's distinctive wheel hubs, making it possible to choose the best tires from a varied lineup for a variety of surfaces! The...
CHF8.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2mm thick
YOK-S4-SB1320
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 1.5mm thick
YOK-S4-SB1315
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Linear Shock Spring 1.85 White for MS1.0
YOK-MS-SSL185
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Linear Shock Spring 1.80 Purple for MS1.0
YOK-MS-SSL180
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Wing for Mercury Sayaka Special S15
YOK-SD-MS15W
This is a spare wing set for MERCURY SAYAKA SPECIAL S15. Made of polycarbonate, the set includes the wing body, side dams, front canards, and side canards. Wing stay is not included. Please prepare aluminum wing stay (D-057LA etc.) separately.
CHF15.90
Auf Lager  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
Auf Lager  
+ −
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (243)
Passend zu...
    Alle zeigen (79)
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Marke
    Alle zeigen (68)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags