Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Neu
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
Nicht auf Lager
Neu
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
Nicht auf Lager
Neu
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
YOK-RD-301AD
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
Nicht auf Lager
Neu
YOK-RD-008RS
This Aluminum mounting Adapter holds the lower rear shock of the RD2.0. By increasing the rigidity of the shock mounting, it improves operationg precision and increaser road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase...
CHF23.90
Nicht auf Lager
Neu
YOK-RD-302FB
This aluminum front bulkhead bridge is recommended for RD2.0 and SD2.0. It increases the rigidity of the front area and improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been...
CHF27.90
Nicht auf Lager
Neu
YOK-ZC-BH210
Button head screws 2mm thick and 10mm long. 10pcs.
CHF2.50
Nicht auf Lager
Neu
YOK-SP-LFGT3A
Plastic mirror set that just fits LEXUS RC-F GT3 body for touring cars.
CHF6.90
Nicht auf Lager
Neu
YOK-MS-002S
This main chassis for MS1.0 is made of FRP material with soft resilience. It is especially effective on low-grip surfaces and adapts well to uneven road surfaces, enabling efficient traction gains.
CHF56.90
Nicht auf Lager
Neu
YOK-MS-BWF10
This is a front ballast weight of 10g per side that can be used for MS1.0. Made of heavy brass, it effectively utilizes the tight space inside the suspension arms to increase front traction during acceleration. The contact area to the chassis is also minimized so as not to spoil the flex of the...
CHF17.90
Nicht auf Lager
Neu
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
Nicht auf Lager
Neu
CHF11.90
Nicht auf Lager
Neu
CHF7.90
Nicht auf Lager
Neu
YOK-MO-010FW
This is a front double-joint universal shaft for MO1.0/2.0. On high-grip surfaces, for example, the steering is often run at full steering angle, which places a heavy load on the universal shaft. In particular, when joints are operated at an angle, the viewpoint is spoiled and the risk of wear...
CHF64.90
Auf Lager  
+
Neu
CHF15.90
Auf Lager  
+
Neu
CHF15.90
Auf Lager  
+
Neu
YOK-SD-MS15B
The MERCURY SAYAKA SPECIAL S15 driven by popular ladies driver Sayaka Shimoda is now available as a body for drifting! The wide form with powerful over fenders and the GT wing with aluminum stays create a racing atmosphere
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF89.90
Auf Lager  
+
CHF7.90
Nicht auf Lager
CHF7.90
Auf Lager  
+
CHF7.90
Auf Lager  
+
CHF7.90
Auf Lager  
+
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (244)
Passend zu...
    Alle zeigen (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
Marke
    Alle zeigen (69)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags