ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
24 Pro Seite
Neu
Scale Antenne 19cm, Drahtstärke 1.5mm
HSH-ACC09819
Coole Scale Antenne 19cm, Drahtstärke 1.5mm Gewinde mit Schraube, M3 zu Befestigung.
CHF6.90
Auf Lager  
+ −
Neu
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
Nicht auf Lager
Neu
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
Nicht auf Lager
Neu
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
F5.5mm Titanium Rod End Balls (2 each) 10mm
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
F5.5mm Titanium Rod End Balls (2 each) 8mm
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
F5.5mm Titanium Rod End Balls (2 each) 6mm
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
Neu
Aluminum suspension mount "D" for RD2.0
YOK-RD-301AD
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
Nicht auf Lager
Neu
Aluminum Rear Shock Lower Adapter RD2.0
YOK-RD-008RS
This Aluminum mounting Adapter holds the lower rear shock of the RD2.0. By increasing the rigidity of the shock mounting, it improves operationg precision and increaser road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase...
CHF23.90
Nicht auf Lager
Neu
Aluminum Front Bulkhead Bridge RD2.0/SD2.0
YOK-RD-302FB
This aluminum front bulkhead bridge is recommended for RD2.0 and SD2.0. It increases the rigidity of the front area and improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been...
CHF27.90
Nicht auf Lager
Neu
M2x10mm BH Screw (10 pcs)
YOK-ZC-BH210
Button head screws 2mm thick and 10mm long. 10pcs.
CHF2.50
Nicht auf Lager
Neu
Mirror for Lexus RC-F
YOK-SP-LFGT3A
Plastic mirror set that just fits LEXUS RC-F GT3 body for touring cars.
CHF6.90
Nicht auf Lager
Neu
Main Chassis FRP 2.5mm for MS1.0
YOK-MS-002S
This main chassis for MS1.0 is made of FRP material with soft resilience. It is especially effective on low-grip surfaces and adapts well to uneven road surfaces, enabling efficient traction gains.
CHF56.90
Nicht auf Lager
Neu
Brass front weight for MS1.0 (10g x 2)
YOK-MS-BWF10
This is a front ballast weight of 10g per side that can be used for MS1.0. Made of heavy brass, it effectively utilizes the tight space inside the suspension arms to increase front traction during acceleration. The contact area to the chassis is also minimized so as not to spoil the flex of the...
CHF17.90
Nicht auf Lager
Neu
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
Nicht auf Lager
Neu
Stapel Palette 1:14,5
HUINAPALETTE
Stapel Palette 1:14,5 Stapel Palette im Euro Maß. Die Paletten passen durch die Füße aufeinnander. Hergestellt im 3D Druck LxBxH: 83 x 55 x 9mm
CHF4.90
Auf Lager  
+ −
Neu
Baggerfahrer 1/16 Huina Amewi Bagger
HUINADRIVER
Baggerfahrer 1/16 Huina Amewi Bagger
CHF7.90
Auf Lager  
+ −
Neu
Schneepflug Huina gelb für 1583
HUI583025
Schneepflug Huina gelb für 1583
CHF39.00
Auf Lager  
+ −
Neu
Schnellwechsler Metall für Huina klein 1583
HUI38607
Schnellwechsler Metall für Huina 1583
CHF26.90
Auf Lager  
+ −
Neu
Palettengabel Metall Huina für 1583
HUI583010
Palettengabel Metall Huina für 1583
CHF24.90
Auf Lager  
+ −
Neu
Fensterrahmen Rover SUV, TRC/302457 & TRC/302550
TRC/302866
Rear Window Frame for TRC/302457 & TRC/302550 Rover SUV First Gen Hard Body
CHF5.90
Auf Lager  
+ −
Neu
Spiegel und Tank Cover für Rover SUV TRC/302457
TRC/302860
Round Rear View Mirrors and Tank Cover for TRC/302457 Rover SUV First Gen Hard Body
CHF4.90
Auf Lager  
+ −
Neu
Karosserie Audi A5 DTM Body Red Bull 1/10, 190mm
TC/TC315RB
Karosserie Audi A5 DTM Body Red Bull 1/10, 190mm TC315 1/10 Audi A5 DTM WB 258mm Width 190mm Clear Lexan Body W/Rear Wing Incl Light Buckle and Mirrors Incl: Audi DTM Decal Sheet Window Mask
CHF36.90
Auf Lager  
+ −
Neu
Karosserie 1/10 Porsche Rally 1982, 190mm
TC/TC2028
Karosserie 1/10 Porsche Rally 1982, 190mm Porsche Rally 1982 WB 258mm Width 190mm Clear Lexan Body W/Rear Wing With Light Buckles / Mirrors Incl: Porsche Rally 1982 Decal Sheet Window Mask
CHF39.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller
    Alle zeigen (244)
Abmessungen
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Anschluss
Dekortyp
Frequenz
Material
Preis

CHF  –  CHF

  • ‎CHF0.2
  • ‎CHF1202.5
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (18)
Ära
Kanäle
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Spannung
Fertigungsgrad
Max. Geschwindigkeit
Marke
    Alle zeigen (69)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags