ERSATZTEIL-FINDER

Ersatzteile

Nach Preis ordnen: Absteigend
48 Pro Seite
RTC Universal shaft for BD8/BD7 2016
YOK-B8-RTC-04
 
CHF39.90
Auf Lager  
+ −
Universal shaft for YZ-2T
YOK-Z2-01075TA
entspricht: Z2-01075T
CHF39.90
Auf Lager  
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF39.90
Auf Lager  
+ −
Brass Rear H Arm Weight B (5g)
YOK-Y2-008RW5
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF39.90
Auf Lager  
+ −
Neu
Double Bearing Front Axle Set for Drift
YOK-RD-010FDS
Double-bearing front axle for use with RD/SD/MD series front axles. The double bearing holding the axle shaft distributes friction and reduces rotational resistance of the front tire to the utmost limit. Axle shaft is made of steel but F3mm to reduce weight and rotational moment. The front end...
CHF39.90
Nicht auf Lager
Motor mount
YOK-B7-32L15
 
CHF38.90
Auf Lager  
+ −
Gear differential unit for MR/RS (Assembled)
YOK-B2-500GS
 
CHF38.90
Auf Lager  
+ −
Adapter
YOK-YT-TSG
 
CHF38.90
Auf Lager  
+ −
Alu Front Steering Hub Carrier YD-4
YOK-Y4-413C
 
CHF38.90
Auf Lager  
+ −
Programmierbox für RPX3 ESC
YOK-BL-R26P3
A dedicated programmer is required to change the RPX3 program. We plan to distribute firmware to update the old programmer (BL-R26P), but you will need to revert to the old firmware (to be distributed) to change the program of the old ESC after the update.
CHF38.90
Auf Lager  
+ −
Univ. Drive Shaft (2pcs) for YZ-870C
YOK-YZ-010
CHF38.90
Auf Lager  
+ −
RTC Lower Caster block
YOK-B9-RTC-02A
Aluminum made
CHF38.50
Auf Lager  
+ −
Front One-Way Unit
YOK-DF-020
 
CHF37.90
Auf Lager  
+ −
Clear lexan front wing set (Wide/Narrow) for YZ-2
YOK-Z2-107FA
entspricht: Z2-107F
CHF37.90
Auf Lager  
+ −
Solid axel set for YD-2/YD-2Plus
YOK-Y2-502A
entspricht: Y2-502
CHF37.90
Auf Lager  
+ −
Front lower suspention mount(42mm)
YOK-Z4-300FL2
 
CHF37.90
Auf Lager  
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF37.90
Auf Lager  
+ −
CG Bar of Side Plate for YD2S-PL
YOK-Y2-002SBA
entspricht: Y2-002SB
CHF37.90
Auf Lager  
+ −
Aluminum Servo Mount BD9/BD10
YOK-B9-203BA
entspricht: B9-203B
CHF37.90
Auf Lager  
+ −
Lower Bulkhead (A) BD9/BD10
YOK-B9-32LA19A
(F Left /R Right)
CHF37.90
Auf Lager  
+ −
Lower Bulkhead (B) BD9/BD10
YOK-B9-32LB19A
(F Right /R Left)
CHF37.90
Auf Lager  
+ −
FCD ×1.8 Solid Axle Unit (Blue)
YOK-DRB-50118
CHF37.90
Nicht auf Lager
Team Yokomo compact nylon tool bag
YOK-YT-YTBA
A tool bag finished with durable nylon fabric and careful sewing. The main storage compartment is double zip type which makes easy to open or close the bag. The back of the lid has a compartment pocket for storing tools and a zipper pocket for storing thin items. The main compartment allows...
CHF37.90
Auf Lager  
+ −
RTC Aluminum hub carrier for BD10/9
YOK-B10-RTC-3A
entspricht: B10-RTC-3
CHF37.90
Auf Lager  
+ −
Yokomo Factory Jacke XL
YOK-ZC-J27XLA
A windproof jacket with the Yokomo Racing Factory logo on the chest and back. Light nylon fabric, perfect for changing seasons. It has a slightly larger size.
CHF37.90
Auf Lager  
+ −
Yokomo Factory Jacke L
YOK-ZC-J27LA
entspricht: ZC-J27L
CHF37.90
Auf Lager  
+ −
4 gear transmission conversion MD1.0
YOK-MD-CON4
The standard MD1.0 transmission has 3 gears and positive torque, but by adding a counter gear and reconfiguring it, this conversion set can be used with 4 gears and anti-torque specifications. Compared to a 3-gear transmission, the additional gear increases drive loss, but the...
CHF37.90
Auf Lager  
+ −
Aluminum Light Weight SP Steering Block RD/SD
YOK-Y2-415SAA
The 0 offset steering block adopted from SD2.0, which has been well-received for its neutral steering characteristics, is now made of aluminum to enhance steering response.
CHF37.90
Nicht auf Lager
Aluminum Rear Hub Carrier (Toe in 1.0°)
YOK-BM-415R10
nicht B-MaxxIII
CHF36.90
Auf Lager  
+ −
Main chassis for B-MAX2
YOK-B2-002
 
CHF36.90
Auf Lager  
+ −
Alu bulk head C for 40T pulley
YOK-B8-32C40
 
CHF36.90
Auf Lager  
+ −
Front Universal Shaft 77mm Bone YZ4-SF
YOK-S4-01077A
entspricht: S4-01077
CHF36.90
Auf Lager  
+ −
Graphite front lower suspension arms (left) BD11
YOK-B11-008FLA
entspricht: B11-008FL
CHF36.90
Auf Lager  
+ −
Graphite front lower suspension arms (right) BD11
YOK-B11-008FRA
entspricht: B11-008FR
CHF36.90
Auf Lager  
+ −
Graphite rear lower suspension arms (left) BD11
YOK-B11-008RLA
entspricht: B11-008RL
CHF36.90
Auf Lager  
+ −
Graphite rear lower suspension arms (right) BD11
YOK-B11-008RRA
entspricht: B11-008RR
CHF36.90
Auf Lager  
+ −
Aluminum rear lower bulkhead (A) BD11
YOK-B11-32RLAA
entspricht: B11-32RLA
CHF36.90
Auf Lager  
+ −
Aluminum rear lower bulkhead (B) BD11
YOK-B11-32RLBA
entspricht: B11-32RLB
CHF36.90
Auf Lager  
+ −
Graphite front lower suspension arm (L) +0.5mm
YOK-B11-008FL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. The front is 0.5mm longer than the standard of the first generation BD11, improving steering response and turning performance. It also reduces the burden on the front tires, so it is...
CHF36.90
Auf Lager  
+ −
Graphite rear lower suspension arm (R) -1.0mm
YOK-B11-008RR1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager  
+ −
Graphite rear lower suspension arm (L)-1.0mm
YOK-B11-008RL1
This suspension arm was used by team drivers and achieved good results at the 2023 IFMAR World Championship. It is 1mm shorter than standard, making it easier for the roll force to work to improve traction. It is especially suitable for road conditions with low grip, such as outdoor asphalt,...
CHF36.90
Auf Lager  
+ −
Graphite Lightweight front lower suspension Arm
YOK-B12-008FR
Graphite Lightweight front lower suspension arm (right) +0.5mm for BD12/11 This lightweight graphite suspension arm has been made lighter than before by changing the cut line, and has further improved maneuverability and traction. Compared to the standard suspension arm of the BD12, it is...
CHF36.90
Auf Lager  
+ −
Bell crank (F8×F5 bearing assembled)
YOK-B7-202SB
 
CHF35.90
Auf Lager  
+ −
Black FRP Main Chassis
YOK-GT-02
 
CHF35.90
Auf Lager  
+ −
Aluminum Rear Shock Tower
YOK-D-026
 
CHF35.90
Auf Lager  
+ −
Front Univ. Shaft 79mm YZ-4
YOK-Z4-01079
 
CHF35.90
Auf Lager  
+ −
Slide Rack YD-4
YOK-Y4-202R
 
CHF35.90
Auf Lager  
+ −
Aluminum front lower bulkhead (A) BD11
YOK-B11-32FLAA
entspricht: B11-32FLA
CHF35.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (197)
Passend zu...
    Alle zeigen (69)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (26)
Anschluss
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Spannung
Fertigungsgrad
Max. Geschwindigkeit
Marke
    Alle zeigen (45)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags