Mini-Z RWD Mazda 787B No.55 LM 1991 Winner (W-LM/K

The MINI-Z RWD series combines a Syncro KT-531P transmitter with a rear-drive chassis that focuses on driving performance.

The MINI-Z racer has been completely established as an R/C model that anyone can easily start using just by preparing 8 AAA batteries. Based on the concept of ``making it easier for a wider range of users to enjoy it,'' we have created a set that includes a Syncro KT-531P transmitter and a scale body that realistically reproduces popular car models. is the “MINI-Z RWD series”. In addition to steering trim and throttle trim, the Syncro KT-531P transmitter is equipped with dual rate and LED control functions, as well as a sponge on the steering wheel as standard to emphasize fit when controlling. Also included is a factory-assembled body that is finished to the same level as a display model, making it even more fun to display. The chassis is also based on the proven MR-03, so not only does it have good driving performance, but it is also guaranteed to have durability and reliability. Furthermore, by adopting a new board with a completely new control program in conjunction with the adoption of the Syncro KT-531P transmitter, linear handling has been achieved, as well as an optional gyro unit (sold separately; see here for compatibility ) . Please confirm.) The behavior when attached is also more controllable. Since this is the perfect package for your "first R/C car," why not start your R/C life with this series?
*Since the Syncro KT-531P transmitter uses FHSS2.4GHz, it is not compatible with conventional ASF/MHS/FHS2.4GHz systems.

●A new series that uses the newly developed Syncro KT-531P transmitter that can be configured in various ways.
●Steering feel has been dramatically improved by adopting a new board with a completely new control program.
●The factory-assembled body has a high-scale finish comparable to display models.
●Full bearing specification with a total of 7 ball bearings, which were previously optional.
- Can be installed on all MINI-Z racer bodies. *Motor case and differential gear assembly compatible with the installed body are required separately.
●Uses an original front suspension ``VCS'' that brings out optimal camber changes depending on the suspension stroke.
●Optional gyro unit (sold separately: please check here for compatibility) can be installed. The gyro unit's effectiveness can be adjusted with the volume installed on the vehicle body (*When using the separately sold KT-432PT transmitter, the transmitter ).

A realistic reproduction of the Renown Charge colored 787B that won the first overall victory for a Japanese car at the 1991 Le Mans 24 Hour Race, the last year in which rotary engine-equipped vehicles could compete.

Includes Syncro KT-531P transmitter with a stylish design. In addition to steering/throttle trim, it is also equipped with dual rate and LED control functions that allow you to adjust the amount of steering angle. It is also possible to set a training mode that reduces vehicle speed (it is set to training mode at the time of shipment).

Since the chassis follows the proven MR-03, it is also possible to install a wide variety of MR-03 chassis parts and a gyro unit (sold separately: see here for compatibility) to improve controllability . Possible.

Can be changed to both narrow and wide treads by replacing the front lower and upper plates and steering tie rod. In addition, it is also possible to change the wheelbase to match the vehicle model (*optional parts sold separately are required for changing).

With a rich lineup of optional parts for MR-03, it is possible to step up according to your budget and level.

TECHNICAL DATA

■Overall length 180.0mm
■Overall width 78.0mm
■Overall height 40.0mm
■Wheelbase 102.0mm (3L) ■
Tread Wide
■Chassis used RWD (MR-03)
■Motor mount LM
■Front wheel offset Narrow +1.5mm
■Rear wheel offset Wide + -0.0mm
■Used radio Syncro KT-531P

KIT CONTENTS

<Ready set contents>
●Factory-assembled chassis
●Factory-assembled plastic body with painting and markings
●Syncro KT-531P 2.4GHz transmitter
●Set of parts for changing front tread ●Front
suspension spacer for adjustment
●6T/7T/8T/9T pinion gear
●Wheels Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tire and wheel included

WHAT YOU NEED BEFORE RUNNING

<Things required for driving>
●4 AAA alkaline batteries for driving
●4 AAA alkaline or nickel metal hydride batteries for transmitter