Mini-Z AWD Toyota Corolla Levin AE86 Red-Black (MA
With a four-wheel drive chassis and drift-specific tires installed, you can enjoy drifting in a small space!
MINI-Z AWD series combined with Syncro KT-531P transmitter.
I want more drivers to know about the performance of the MINI-Z AWD. The ``MINI-Z AWD Readyset'' was born to fulfill this desire. A foundation with a revised steering control program has been introduced to the MA-020 series chassis, which is equipped with a VCS (variable camber suspension) at the front that optimizes camber changes with stroke. Compatible with a dedicated gyro (sold separately: model number MZW446) and equipped with a dedicated space and gyro adjustment volume. The effectiveness of the gyro can be adjusted on the chassis alone, and changes in posture are reflected in steering correction, providing safe driving for beginners and support for experts to demonstrate their abilities. Full bearing specification with 14 additional bearings installed. We have created a complete chassis that is highly efficient and highly durable at an affordable price. The set is a ready set equipped with a body full of scale unique to MINI-Z and a 2.4GHz radio "Syncro KT-531P" that does not require band management. Equipped with drift tires as standard, you can enjoy thrilling drifting right away just by installing batteries. Of course, it is compatible with many of the ASC bodies that are an asset of MINI-Z (separate parts are required depending on the car model). Experience the driving experience that can only be experienced with an AWD chassis with the MINI-Z AWD.
*The separately sold LED light unit set (No.MZW429R) can be installed on Toyota Corolla Levin AE86.
-A renewed version of the AWD sports chassis based on the MA-020 series chassis.
●Special platform with revised steering control program.
●Equipped with a volume that allows you to adjust the gyro effect on the chassis alone.
●Drift tires are standard equipment.
●Ready set that can run immediately with just a set of batteries.
●Uses a 2.4GHz Syncro KT-531P transmitter that does not require band management.
●Factory-assembled body with the same finish as the display model.
●Adopts front suspension "VCS" that brings out camber changes due to suspension stroke.
●No tools are required, and front suspension coil springs can be easily replaced.
●A wide variety of optional parts can be installed.
●Note) The optional ICS cannot be used. Also, since it is designed exclusively for the KT-531P transmitter, it is not compatible with the KT-18, KT19, EX-5UR ASF, EX-6, and EX-6R transmitters. In addition, the gyro unit (sold separately: model number MZW446) is only compatible with dedicated products.
The AE86 Corolla Levin, also known as the ``Hachiroku'', demonstrated nimble driving characteristics thanks to the combination of an FR layout and an engine with good pickup. Although it was released in 1983, its appeal has not faded even today, along with its sibling car, the Sprinter Trueno.
Includes Syncro KT-531P transmitter with a stylish design. In addition to steering/throttle trim, it is also equipped with dual rate and LED control functions that allow you to adjust the amount of steering angle. It is also possible to set a training mode that reduces vehicle speed (it is set to training mode at the time of shipment).
AWD Readyset exclusive chassis based on the MA-020 series chassis and equipped with the RA45 unit.
Adopts front suspension "VCS" that brings out camber changes with suspension stroke. No tools are required and front suspension coil springs can be easily replaced.
The rear suspension uses a strut type.
Full bearing specification with 14 bearings installed.
Drift tires are standard equipment.
Compatible with a dedicated gyro (sold separately: model number MZW446) and equipped with a dedicated space and gyro adjustment volume.
TECHNICAL DATA
■Overall length 164.5mm
■Overall width 68.0mm
■Overall height 53.0mm
■Wheelbase 94.0mm (L)
■Tread F: 56.5mm R: 56.5mm
■Chassis used MA-020-N
■Front wheel offset narrow +-0.0mm
■Rear wheel Offset narrow +-0.0mm
■Used radio Syncro KT-531P
KIT CONTENTS
<Readyset contents>
●Complete chassis with R/C unit installed
●Factory-finished plastic body with painting and markings
●Syncro KT-531P 2.4GHz transmitter
●Mini pylon
●Pinion gear (15T, 17T, 19T, 21T)
●Spur gear ( 27T, 29T, 31T)
●Spare nut
●Foil wrench
●Pinion removal tool
WHAT YOU NEED BEFORE RUNNING
<What you need before driving>
●4 AAA batteries for transmitter
●4 AAA batteries (alkaline or nickel metal hydride) for running
- Elektro Bürstenmotor
- On-Road
- Anfänger/Einsteiger
