ERSATZTEIL-FINDER

Véhicules RC

Vous trouverez ici une vaste sélection de modèles de véhicules RC. En tant que spécialistes de nos propres pistes de course de voitures RC, nous avons tout pour les débutants et les professionnels.

Trier par:
Recommandé
96
Light weight Tension Adjust Cam (upper) BD8
YOK-B8-BTC
CHF7.90
En stock  
+ −
Alu Belt Tension Adjust Cam 1pcs. black BD8
YOK-B8-BTCB
CHF8.90
En stock  
+ −
Alu Main Chassis BD8
YOK-B8-002A
 
CHF125.90
En stock  
+ −
Center Balance Weight 40gr. BD8
YOK-B8-BW40
CHF21.50
En stock  
+ −
Center Balance Weight 50gr. BD8
YOK-B8-BW50
 
CHF22.90
En stock  
+ −
Front Axle for Double Joint Univ. BD8
YOK-B8-010AW
 
CHF10.50
En stock  
+ −
Front Bone for Double Joint Univ. BD8
YOK-B8-010BW
 
CHF10.80
En stock  
+ −
Maintenance Kit for double joint univ. BD8
YOK-B8-010TW
CHF21.90
En stock  
+ −
3.5mm Cramp Wheel Hub with 0.5/1mm spacer BD8
YOK-B8-011NBA
entspricht: B8-011NB
CHF9.90
En stock  
+ −
Front Inner Susp. Arm Pin 3x42mm BD8
YOK-B8-009B
CHF7.90
En stock  
+ −
Graphite Front Steering Hub Carrier 4° -1mm
YOK-B8-413G-1
CHF11.50
En stock  
+ −
Graphite Front Steering Hub Carrier 4°
YOK-B8-413G
CHF11.50
En stock  
+ −
Graphite Rear Hub Carrier BD8
YOK-B8-415RG
CHF12.50
En stock  
+ −
Plastic suspention mount bush BD8
YOK-B8-301BSA
 
CHF9.50
En stock  
+ −
Aluminum susp m A (39.5~42.7mm) BD8/BD9/BD10
YOK-B8-301AA
 
CHF22.50
En stock  
+ −
Aluminum suspention mountB (43.5~46.7mm) BD8
YOK-B8-301BA
 
CHF21.90
En stock  
+ −
Aluminum suspention mount C (46.4~49.6mm)BD8
YOK-B8-301CA
entspricht: B8-301C
CHF21.90
En stock  
+ −
Alu separate susp. m.A (39.5~42.7mm)BD8/BD9/BD10
YOK-B8-301SAA
entspricht: B8-301SA
CHF28.90
En stock  
+ −
Alu separate suspention mountB (43.5~46.7mm)BD8
YOK-B8-301SBA
 
CHF24.90
En stock  
+ −
Alu separate suspention mount C (46.4~49.6mm)BD8
YOK-B8-301SC
CHF24.90
En stock  
+ −
Alu FR susp m A (39.5~42.7mm) BD8/BD9/BD10
YOK-B8-301FRAA
 
CHF22.50
En stock  
+ −
Alu FR Suspension Mount B (43.5-46.7mm) BD8
YOK-B8-301FRBA
 
CHF22.50
En stock  
+ −
Alu FR suspension mount C (46.4~49.6mm) BD8
YOK-B8-301FRCA
 
CHF22.50
En stock  
+ −
Shock Cap Nut engraved mark BD8
YOK-B8-S4C
 
CHF21.50
En stock  
+ −
Karbon Dümpferbrücke hinten (kurz) D815V2
HB204046
Design Team Notes : HB67289 shock bodies are required
CHF39.00
En stock  
+ −
D815V2 Schwingen Set vorne (hart)
HB115833
These front suspension arms are made from harder material for increased arm stiffness. These are standard equipment on the RGT8, and after testing with our factory off-road drivers, they concluded that when installed on the D815 the harder material improves handling on high traction surfaces and...
CHF19.90
En stock  
+ −
D815V2 Big Bore Shock Body 16x107mm 2stk.
HB67289
CHF27.90
En stock  
+ −
O-Ring Grease
AM-210213
To protect and prevent your o-ring from leaking, at the same time provide a super smooth action, Arrowmax had introduced their new O-ring Grease. A proper working O-ring are critical for the shocks to work properly and without O-ring grease, it will not only protect it from damaging substance...
CHF5.10
En stock  
+ −
Molyfu Ep2 Grease
AM-210212
Arrowmax new Molyfu Ep2 grease is specially formulated to provide the best lubrication for thrust bearings, ring and pinion gears. Capable of withstanding extremely high pressure without losing its lubricity and the sticky nature makes it perfect for both on and off road application
CHF5.10
En stock  
+ −
Diff Lube Grease
AM-210211
Arrowmax had now expands its line-up to include a line-up of lubrication/grease products. Perfect to use with any ball diff, and are suitable for ceramic or carbide diff-balls. An essential for a smooth feeling diff, this diff-lube came in an easy to use plastic tube. Available now.
CHF5.20
En stock  
+ −
Chassis Droop Gauge Support Blocks 20mm For 1/8 Black Golden (2)
AM-171055
 
CHF41.70
En stock  
+ −
Chassis Droop Gauge Support Blocks 10mm For 1/10 Black Golden (2)
AM-171054
 
CHF39.50
En stock  
+ −
Bag For Graphite Set-Up Board (1/10 & 1/8 Cars) Black Golden
AM-171004
 
CHF26.90
En stock  
+ −
Bag For Graphite Set-Up Board (1/12 & 1/10 Cars) Black Golden
AM-171003
 
CHF21.70
En stock  
+ −
Querlenker vorn links - blau
RPM70375
Product Description   In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo (reference RPM #80212 & #80215) are already compatible with the Summit but due to the extended...
CHF21.50
En stock  
+ −
Querlenker vorn links - schwarz
RPM70372
Product Description   In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo (reference RPM #80212 & #80215) are already compatible with the Summit but due to the extended...
CHF21.90
En stock  
+ −
Dämpferbrücke vorn
RPM70392
- replaces stock Traxxas #6839   - fits the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally
CHF17.50
En stock  
+ −
Roof Mount Light Bar Set
RPM80922
- fits most bodies with at least 6" of roof width for the light bar mounts to fit in place.
CHF34.50
En stock  
+ −
Lichtbalken für Dach (Slash etc.
RPM80925
-fits most bodies with at least 6" of roof width for the light bar body mounts to fit in place.
CHF32.90
En stock  
+ −
Scheinwerferkegel schwarz
RPM80982
This is the RPM Light Canister Set for use on the Traxxas Slash 2WD Short Course Racing Truck RTR.
CHF16.80
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 10 Werktagen. jours ouvrables environ.
+ −
ALU Adjustable Wing Stay (Silver)
TAM47325
 
CHF34.60
En stock  
+ −
ALIAS Füsse (4) non-skid
TRAX6649
 
HerstellerTraxxas MarkeTRAXXAS
CHF2.20
En stock  
+ −
Gear set (for 2085 servo)
TRAX2087
 
HerstellerTraxxas MarkeTRAXXAS
CHF21.90
En stock  
+ −
Realistic JPX Scale Body w/ Steel Roll Cage & LED
INTC26623BLACK
Realistic JPX Scale Body w/ Steel Roll Cage & LED Light for 1/10 Scale Crawler
MaterialLexan AuswahlhilfeCrawler Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF99.00
En stock  
+ −
Realistic JPX Scale Body w/ Steel Roll Cage & LED
INTC26623SILVER
Realistic JPX Scale Body w/ Steel Roll Cage & LED Light for 1/10 Scale Crawler
MaterialLexan AuswahlhilfeCrawler Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF45.00
En stock  
+ −
Realistic Roof Top SMD LED Spot Light 107x19x25mm
INTC26797SILVER
Realistic Roof Top SMD LED Spot Light 107x19x25mm for 1/10 Scale Crawler C26797SILVER New Item
CHF35.00
En stock  
+ −
TA07 ALU Motor Mount Posts
TAM54725
Motor Mount Posts aus hochwertigem Aluminium Ersetzen die Plastik-Teile aus dem Baukasten. Die erhöhte Steifigkeit der Motorbefestigung durch diese Posts wird vorallem beim Einsatz von stärkeren Antriebsmotoren empfohlen. Lieferumfang: 2x Motor Mount Posts aus Aluminium...
CHF11.90
En stock  
+ −
Square Spike Tire R *2 Ersatz zu 53093 / 19805537
TAM53084
Alte Nr.19805537
CHF11.90
En stock  
+ −
High Mount Rear Shock Tower ( 112mm )
HB67210
CHF41.00
stock au fournisseur  
Entrepôt externe. Livraison en 3 jours ouvrables environ.  
+ −
CMX Car Body Post Set
MST230026
CHF11.50
En stock  
+ −
MST Balancing weights 10gr. 4st.
MST820087
CHF13.90
En stock  
+ −
MST Balancing weights 30gr. 4stk.
MST820088
CHF19.50
En stock  
+ −
Alu Balancing weights adaptor purple
MST820099P
 
CHF15.90
En stock  
+ −
32mm Super soft Coil Spring Set 8pcs
MST820109
CHF19.90
En stock  
+ −
LR B-MAZINGER - 1-8 Buggy Komplettradsatz - Fertig Verklebt - Soft - Speichenfel
LOUISE-T3108SB
The perfect arc pattern of tires increase curved speed and function. Base pin extraordinary on hard-packed surfaces, supplies the straight acceleration and good grips. Unmatched compounds of tires provide grip for long time and suit difference racecourse. Insert Reusable insert because...
CHF24.10
En stock  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
En stock  
+ −
Allen Wrench 1.5 X 60MM Honeycomb
AM-410114
 
CHF18.90
Rupture de stock
CNC Front Susp. Holder 7075
HPI66211
CHF20.00
En stock  
+ −
Slipper Disk ( 2 )
VTR242012
 
CHF6.80
En stock  
+ −
Fender (1 pc.) for 56319
TAM14605012
 
CHF16.90
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 3 Werktagen. jours ouvrables environ.
+ −
Battery holder set
YOK-B7-11815
 
CHF34.90
En stock  
+ −
Karosserie Lancia Delta HF Integrale 1:10 lackiert
KBD48384
1/10 Lancia Delta HF Integrale Karosserie Body Shell "Offiziell Lizensiertes Produkt" Die Karosserien sind als Bausatz unlackiert oder auch komplett fertig montiert und lackiert erhältlich Offiziell lizensiert Höchste Detailtreue Massives Sortiment an Zubehör, das...
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierunglackiert HerstellerKillerBody
CHF72.90
En stock  
+ −
Karosserie Lancia Delta HF Integrale klar
KBD48488
.Modellkategorie On-Road   .Kategorie Karosserien Type unlackiert Massstab 1/10 Radstand 257mm Spurbreite 195mm Farbe(n) klar Inhalt 1 Set
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Lackierungunlackiert HerstellerKillerBody
CHF39.90
En stock  
+ −
840 Flange Bearing TRF 2pcs.
TAM42110
 
CHF12.05
En stock  
+ −
Alu Steering Bell Crank für 2WD Drift
YOK-D-163
 
CHF55.90
En stock  
+ −
YZ-4 Graphite Front Susp. Arm (Gull type) +1mm
YOK-Z4-008FG1
 
CHF12.50
En stock  
+ −
Clear lexan front wing set (Wide/Narrow) for YZ-2
YOK-Z2-107FA
entspricht: Z2-107F
CHF37.90
En stock  
+ −
Aluminum front axle (Hard anodized) for YZ-2
YOK-Z2-010FAA
 
CHF9.50
En stock  
+ −
Aluminum cramp servo horn 20mm (for FUTABA)
YOK-ZC-204520A
entspricht: ZC-204520
CHF17.90
Rupture de stock
Aluminum cramp servo horn 17mm (for FUTABA)
YOK-ZC-204517A
entspricht: ZC-204517
CHF17.90
En stock  
+ −
Stahl Zahnrad 48T für HPI Bullet MT/ST
INTC25270
CHF17.50
En stock  
+ −
Alu Diff Deckel hinten für Axial 1:10 Yeti
INTC26268SILVER
 
CHF21.90
En stock  
+ −
Solid Axle
YOK-SD-501SA-A
 
CHF11.90
En stock  
+ −
Nerf Bars blau
RPM70655
Nerf Bars Blue 1/10 Rally/LCG Slash 4x4
CHF13.50
En stock  
+ −
Nerf Bars schwarz
RPM70652
Black Nerf Bars 1/10 Rally
CHF10.50
En stock  
+ −
Radachsträger hinten
RPM80382
RPM Rear Bearing Carrier 2WD Slash, Rustler, Stampede, and Bandit, Black
CHF12.50
En stock  
+ −
Bumper vorn+Skid-Platte schw.
RPM80022
Front Bumper and Skid Plate Black Slash 4x4 Black
CHF21.90
En stock  
+ −
Pinion Gear 48P 40T(7075 Hard)
AM-348040
 
CHF7.20
En stock  
+ −
Dämpferkolbenzange V2 (Black)
AM-190025-B
CHF34.90
En stock  
+ −
Shock spring (Blue) for YRX 12 Pitching damper
YOK-YX-40SBL
 
CHF4.50
En stock  
+ −
Clear lexan front wing (Wide/Narrow) for YZ-2
YOK-Z2-107FWA
entspricht: Z2-107FW
CHF8.90
En stock  
+ −
Set Of 17 Alu Pinions 64DP With Caddy 21T ~ 37T
AM-180014
AM-180014 Set Of 17 Alu Pinions 64DP With Caddy 21T ~ 37T
CHF92.40
Rupture de stock
TEN-SCT 40T Spur Gear Mod 1
LOSB3436
 
HerstellerLosi MarkeLOSI
CHF11.20
En stock  
+ −
S10 Twister MT/TX Antriebsknochen 2Stk.
LRP124124
 
CHF15.50
En stock  
+ −
Set Of 17 Alu Pinions 48DP With Caddy 15T ~ 31T
AM-180017
AM-180017 Set Of 17 Alu Pinions 48DP With Caddy 15T ~ 31T Included AM-348015 Pinion Gear 48P 15T(7075 Hard) AM-348016 Pinion Gear 48P 16T (7075 Hard) AM-348017 Pinion Gear 48P 17T(7075 Hard) AM-348018 Pinion Gear 48P 18T(7075 Hard) AM-348019 Pinion Gear 48P 19T(7075 Hard) AM-348020 Pinion...
CHF109.90
Rupture de stock
Ob. Bulkhead vorne (7075/schwarz)
HB114502
CHF49.00
En stock  
+ −
RC4WD Dachträger m. Scheinwerfern SCX-10
RC4WD-VVV-C0262
RC4WD Dachträger mit Scheinwerfern SCX10
CHF179.00
En stock  
+ −
ECX 1:24 4WD Lenkgestängeset
ECX204006
HerstellerElectrix Rc MarkeELECTRIX RC
CHF11.30
En stock  
+ −
Slalomkegel 4x
SIVA261831
Highlights: 4x Slalomkegel Höhe: 23,5 cm Abmessungen (LxBxH) mm: ca.140x140x230 Kegel besitzt 4 Löcher und kann somit befesigt werden stabilem und bruchfestem Kunststoff Kegel besitzt 4 Löcher und kann somit befesigt werden stabilem und bruchfestem Kunststoff
CHF13.50
En stock  
+ −
Spurstangen - 3x 20mm - Schwarz (2 Stk.)
TM116132BK
 
CHF10.95
stock au fournisseur  
Entrepôt externe. Livraison en 5 jours ouvrables environ.  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF64.90
En stock  
+ −
Karosserie Toyota Corolla Levin AE86 2Dr 195mm
PAB-168
Width : 195 mm 1/10 use The product is non-painting. Body made by polycarbonate Decare & masking is attached Front & rear bumper / anomalous style(Product made in polycarbonate) Front & rear light parts attachment Even a state without an attached bumper is OK Front bumper...
Auswahlhilfe200mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert HerstellerPandora RC
CHF74.90
En stock  
+ −
Racing Wing (Carbon Pattern)
TAM54729
 
CHF9.50
stock au fournisseur
Entrepôt externe. Livraison en Externes Lager. Lieferung in ca. 3 Werktagen. jours ouvrables environ.
+ −
Rear Axle 10x169.5mm 2pcs
AX31085
 
CHF32.90
En stock  
+ −
J Parts 84431
TAM19118018
 
CHF18.90
En stock  
+ −
BEAST BX BL Buggy RTR 1/10 Brushless
D-POWER-BS221R
BEAST BX Buggy RTR 2.4GHz - Brushless
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradRTR (ready to run)
CHF299.90
En stock  
+ −
Catégories
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags