Français (CH)
ERSATZTEIL-FINDER

Véhicules RC

Vous trouverez ici une vaste sélection de modèles de véhicules RC. En tant que spécialistes de nos propres pistes de course de voitures RC, nous avons tout pour les débutants et les professionnels.

Trier par:
Recommandé
Montrer:
96
Heavy Duty Gokuraku OR Wing narrow
YOK-ZS-GWBNHA
entspricht: ZS-GWBNH
CHF 14.90
En stock  
+ −
Alu main Chassis hard anodized YZ4-SF
YOK-S4-002SA
entspricht: S4-002S
CHF 95.00
En stock  
+ −
Aluminum Chassis SO3.0
YOK-SO-002
CHF 94.90
En stock  
+ −
Alu adjustable rear short H arm for YD-2 (Red)
YOK-Y2-R08RASA
entspricht: Y2-R08RAS
CHF 99.90
En stock  
+ −
Slide Rack Set (Center Clank) for RD2.0
YOK-RD-202SC
This slide rack set can be bolted on to the RD2.0.The servo can be mounted closer to the rear via the center crank, increasing the rear load and stability.
CHF 134.90
En stock  
+ −
Aluminum adjustable rear H arm kit for YD-2/YD-4
YOK-Y2-008RAA
This all new rear H arm has made by aluminum with our original high precision processing to enable the driver to make an adjustment for chassis tread for finding out the best chassis balance and also suites for the variety of car bodies width as well.   Adjustable length for each...
CHF 95.00
En stock  
+ −
Karosserie Mercury Sayaka Spl. S15 Drift 1:10 klar
YOK-SD-MS15B
The MERCURY SAYAKA SPECIAL S15 driven by popular ladies driver Sayaka Shimoda is now available as a body for drifting! The wide form with powerful over fenders and the GT wing with aluminum stays create a racing atmosphere
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 89.90
En stock  
+ −
BL-RPX2 Competition ESC (Purple) for Drift
YOK-BL-RPX2DP
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 259.90
En stock  
+ −
Aluminum cramp servo horn 17mm (for FUTABA)
YOK-ZC-204517A
entspricht: ZC-204517
CHF 17.90
En stock  
+ −
BL-RPX2 Competition ESC (Red) for Drift
YOK-BL-RPX2DR
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 259.90
En stock  
+ −
Aluminum Gear Differential Case (with 38T pulley)
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF 64.90
En stock  
+ −
Rear ESC Mount for YD-2 series
YOK-Y2-REMA
Please be informed that Introducing new ESC Rear mount option for our YD-2 series drift chassis. The final design is a result of extensive field testing by Team Yokomo drivers. It has the best balance between mounting position and weight distribution/transfer. The new option is a 2 piece...
CHF 42.90
En stock  
+ −
Réduction 30%
Réduction 30%
Team Yokomo RWD Drift Car YD-2ZS mit Gyro
YOK-DP-YD2ZSG
Based on the YD-2Z chassis, a new machine equipped with a 4-gear transmission S series gearbox that allows the motor rotation to be used in the anti-torque direction is now available. While the 3-gear transmission up to now has been a great advantage in terms of front traction and...
CHF 259.00 CHF 369.00 -30%
En stock  
+ −
Alu Rear Susp. Mount Spacer Set (for rear side)
YOK-Z4-300RRS
 
CHF 18.50
En stock  
+ −
YC-1134 Parts Case Set
YOK-YC-1134A
Parts Case Set 255x190x60mm
CHF 28.90
En stock  
+ −
Pitching Control System BD8
YOK-B8-PCS
Yokomo are continually evolving the World Championship winning BD8 Platform
CHF 84.90
En stock  
+ −
Brass Motor Mount for BD10
YOK-B10-302MBA
The new brass motor mount will increase the weight by 34g compare to the original aluminum unit. It will help to meet race ready weight regulations without upsetting the left/right balance weight distribution by centering the weight at the middle of the chassis.
CHF 84.90
En stock  
+ −
HD f5.5mm Ball end cap for YZ-2/YZ-4
YOK-Z2-206DM2A
entspricht: Z2-206DM2
CHF 9.90
En stock  
+ −
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
En stock  
+ −
Alu Main Chassis BD8
YOK-B8-002A
 
CHF 125.90
En stock  
+ −
Aluminum ball diff kit for YD-2 series
YOK-Y2-500AA
entspricht: Y2-500A
CHF 34.90
En stock  
+ −
Karosserie Toyo S15 Silvia klar
YOK-SD-TY15BB
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 62.90
En stock  
+ −
Team Yokomo Rookie Off-Road 2WD Buggy 1:10 Bausatz
YOK-ROR-010
We are pleased to announce the release of the new RO1.0 chassis kit, ideal for beginners and intermediate off-road racers. The kit is reasonably priced and comes with pre-assembled dampers, turnbuckle tie rods, etc., as well as a pre-cut body for easy assembly. The body is also pre-cut for...
Massstab1:10 Motor / AntriebElektro Brushless-Motor, Elektro Bürstenmotor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 249.90
En stock  
+ −
Alu Rear Brace with Cooling Fan YD-2
YOK-Y2-303RBFA
entspricht: Y2-303RBF
CHF 54.90
En stock  
+ −
Optional parts set for YD-2 series Upgrade 4
YOK-Y2-OP4A
By increasing the rigidity of the shock tower, the suspension will move even better. Considering the lightweight finish on the front side, we chose a graphite hybrid shock tower and a lightweight integrated bulkhead.
CHF 124.90
En stock  
+ −
Aluminum Main Chassis U.S. Version BD11
YOK-B11-002AU
BD11US specification aluminum main chassis. By not removing meat, it increases rigidity, promotes a low center of gravity, and is suitable for high-grip road surfaces.
CHF 124.90
En stock  
+ −
Universal Shaft 68mm Bone DTM2
YOK-Z2-01068A
entspricht: Z2-01068
CHF 34.90
En stock  
+ −
Main Drive Shaft graphite YD-4
YOK-Y4-644G
 
CHF 41.50
En stock  
+ −
Competition Brushless ESC RPX4
YOK-BL-RPX4
The ultimate speed controller, which exceeds the power of the RPX2 and the ease of handling of the RPX3, is now available in an updated version! The state-of-the-art power MOS FETs have been rigorously tested in racing environments. It maximises the performance of stock motors and allows the...
CHF 249.00
En stock  
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
AuswahlhilfeBuggy MaterialLexan Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF 24.90
En stock  
+ −
Aluminum rear hub carrier for YZ-4SF2
YOK-S4-415RS2A
Aluminum rear hub carrier compatible with the sturdy F3mm outer suspension arm pin. Four types of bushes for passing suspension pin are attached, and the height can be adjusted in 7 steps by switching the height. Also, it also has the effect of increasing rear traction due to rise of...
CHF 82.90
En stock  
+ −
Alu front upper A arm holder rear YD4
YOK-Y4-302UR
 
CHF 34.90
En stock  
+ −
Alu Steering Hub Carrier YZ-2
YOK-Z2-413A
 
CHF 59.90
En stock  
+ −
Aluminum Adj. Suspension Mount Set Purple RD2.0
YOK-RD-301ASP
CHF 79.90
En stock  
+ −
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF 79.90
En stock  
+ −
Front Double Joint Universal Driveshaft BD9/BD10
YOK-B9-010FWA
entspricht: B9-010FW
CHF 59.90
En stock  
+ −
BN Sports Toyota JZX100 Mark2 Body Set
YOK-SD-JZXBNB
The JZX100 Mark II, the most popular 4-door body, will be released as a new body for drifting. Moreover, the body is designed with BN Sports aero that brings out the power of a drift machine, and the one-piece molded body is easy to build and has a great silhouette. The all-in-one body also comes...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 79.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (White)
YOK-DP-GR86W
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Yokomo Transmitter Bag V2
YOK-YT-27TB2A
Yokomo's new propo bag has been redesigned! The design has been changed to the Racing Factory logo, and it is a propo bag with cushioning to protect your precious radio from shocks when traveling to the RC circuit. The image of the bag is the same as that of the pit bag, and the total...
CHF 55.90
En stock  
+ −
Drift Package 2WD Pandem GR Supra Kit (Red)
YOK-DP-GRA90R
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Graphite Main Chassis YD-4
YOK-Y4-002
 
CHF 119.00
En stock  
+ −
Team Yokomo Rookie Drift RD2.0 inkl. V2 Gyro
YOK-RDR-020G
The "Rookie Drift RD2.0" is a new basic machine released by Yokomo, a pioneer in the field of drift R/C racing. The base specs have been enhanced by improving the steering angle and securing rear grip, etc., so that even first-time drifters can enjoy this machine. The chassis configuration...
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOn-Road Drift AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 229.90
En stock  
+ −
Réduction 43%
Réduction 43%
Brushless Combo BL-SP4/ Zero-S 13.5T schwarz
YOK-BL-S4135DBA
entspricht: BL-S4135DB
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOn-Road Drift HerstellerYokomo
CHF 119.00 CHF 209.90 -43%
En stock  
+ −
BD8/BD7'16 Rear Toe Control system kit (ARS)
YOK-B8-RTC
CHF 57.90
En stock  
+ −
3gear idler gear für CA
YOK-Z2-503ICA
entspricht: Z2-503IC
CHF 6.90
Rupture de stock
YD-2Z Front Upgrade Set schwarz
YOK-Y2-FUSBA
A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for...
CHF 115.00
En stock  
+ −
Aluminium Rear Susp. Mount (Rear/L5 Arm) YZ-4
YOK-Z4-300LRR
 
CHF 32.50
En stock  
+ −
YD-4 MR Conversion kit
YOK-DP-YD4MRC
*** Nur Umbausatz. Sie benötigen ein normales YD-4, um dieses zu YD-4 MR Spec zu konvertieren. ***
Massstab1:10 Motor / AntriebElektro Brushless-Motor EinsatzOn-Road Drift AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 225.00
En stock  
+ −
Sway Bar Set RS2.0 (Only Aluminum Bulkhead)
YOK-RS-412AS
These stabilizers can be mounted on RS2.0 aluminum lower bulkheads. The set comes with three different bars, front and rear, each with ball bearing support for smooth operation and increased stabilizing effect.
CHF 55.90
En stock  
+ −
Front bulk head for YZ-2T
YOK-Z2-002BTA
entspricht: Z2-002BT
CHF 9.50
En stock  
+ −
Alu Front upper A arm holder legt YD-4
YOK-Y4-302UHL
 
CHF 31.90
En stock  
+ −
Alu Front upper A arm holder right YD-4
YOK-Y4-302UHR
 
CHF 31.90
En stock  
+ −
Aluminum front short A arm set for YD-2 (Red/Bevel
YOK-Y2-R08FSCA
entspricht: Y2-R08FSC
CHF 69.90
En stock  
+ −
BD7-2016 High Traction Graphite Main Chassis
YOK-B7-00216S
High Traction Graphite Main Chassis (Increase Traction)
CHF 109.90
En stock  
+ −
Graphite main chassis (Hard) for BD9
YOK-B9-00219H
A new hard main chassis for the BD9 is now available!
CHF 109.90
En stock  
+ −
Alu Offset Rear Hub Carrier 0 degree Set YZ4/Z2ca
YOK-Z2-415RS
This is intended for the variable set up for upper arm by replacement for several kind of track surface.
CHF 89.90
En stock  
+ −
Optional parts set for YD-2 series Upgrade 2
YOK-Y2-OP2A
Axles and bearings that lightly finish the rotation of the tire. It is possible to prevent spin by improving the running of the front. In addition, the variable kingpin angle steering block provides optimal wheel alignment for drift driving.
CHF 109.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (Clear)
YOK-DP-GR86
The famous "DRIFT PACKAGE", the pioneer of drift RC cars and synonymous with drift RC cars, is back in 2WD form! Based on a conventional assembly kit, this reasonably priced package includes a clear body and tires/wheels. If you purchase the steering gyro and running set, you can enjoy...
CHF 219.00
En stock  
+ −
Ceramic Kugellager 10x15x4mm 2stk.
YOK-BB-1510CBA
entspricht: BB-1510CB
CHF 16.90
En stock  
+ −
Upper Arm Mount Rear YZ-4
YOK-Z4-300RU
 
CHF 9.90
En stock  
+ −
Front Suspension Arm (Graphite)Flat +1? long YZ-4
YOK-Z4-008F1
 
CHF 13.50
En stock  
+ −
Réduction 50%
Réduction 50%
Racing Performer RPXII competition brushless ESC
YOK-BL-RPX2B
We are happy to inform our new premium ESC for 1/10 scale RC racing and drift competitors.   The new ESC is named as RPXII which has various new adjustable functions as well as latest   auto function at the same time.           ¦ Made with the highest grade FET and...
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 149.00 CHF 299.90 -50%
En stock  
+ −
Rear Belt 103T YZ-4
YOK-Z4-309-8
CHF 17.90
En stock  
+ −
Hard main chassis (Short type)
YOK-Z2-002DA
For Dirt track
CHF 105.00
En stock  
+ −
Front upper arm mount ”S” (Standard) for YZ-2 seri
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF 25.90
En stock  
+ −
Alu Conversion Kit für Yokomo SD
HSH-YOK-ALUCONV
Alu Conversion Kit für Yokomo SD Aluminium blau, inkl. Kugellager
CHF 69.90
En stock  
+ −
Aluminum Front Solid Axle Set for RS1.0/RS2.0
YOK-RS-501SS
A new solid axle kit has been long awaited by RS riders looking to improve their times! Lighter than a standard geared differential, it eliminates unnecessary differential operation, resulting in a more stable ride. It is particularly effective on high grip surfaces such as carpet, providing...
CHF 69.90
En stock  
+ −
Type B, Front suspension arm
YOK-Z2-008F3A
F3 Outer pin spec
CHF 11.00
En stock  
+ −
"Teams" Light weight FLEX Chassis Set für YD-2
YOK-Y2-002TSA
Team Yokomo's competition drift brand, Teams, is proud to announce the release of the new light weight flex chassis set for the YD-2 series. The lightweight graphite main chassis plate and special lightweight battery holder provide the right amount of rigidity and traction for a more...
CHF 209.00
En stock  
+ −
Graphite molded S3/LD rear sus-arm YZ2-DTM/CAL
YOK-Z2-008R3GA
For YZ-2 DTM/CAL 3/3.1
CHF 16.90
En stock  
+ −
Front Lower Short A Arm YD2 YD4
YOK-Y2-008FSCA
Yokomo will release a new optional parts [Front lower short A arm] for more freedom on counter steering for existing customer who enjoy AWD and RWD drifting with YD-4 & YD-2 series in the end of this month, May 31st. Short Suspension Arm will be a kind of highlight at all the option...
CHF 64.90
En stock  
+ −
Motor Mount
YOK-B9-302MA
entspricht: B9-302M
CHF 49.50
En stock  
+ −
RTC Separate Suspension mount (B)
YOK-B9-RTC-05A
entspricht: B9-RTC-05
CHF 32.90
En stock  
+ −
Drift competition tire for carpet/P-tile DRC 4stk.
YOK-ZR-DRCA
For Carpet/Polished Tile These HDPE tires have a flatter surface compared to the asphalt variant. By increasing the contact patch these tires let you drift on carpet/polished tile with an increased sense of grip and driving performance
Auswahlhilfe200mm Touring, 190mm Touring MaterialDrift Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road Drift
CHF 11.00
En stock  
+ −
BD10F Front balance weight L / R 40g
YOK-B10-BWF40A
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF 65.00
En stock  
+ −
Front double-joint universal BD11
YOK-B11-010FWA
entspricht: B11-010FW
CHF 64.90
En stock  
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425A
entspricht: Z2-20425
CHF 16.90
En stock  
+ −
Fahrzeug Tasche Team Yokomo
YOK-YT-28MB
A new hand-carry bag with the Yokomo logo is now available for transporting your machine to the race track. The bag is large enough to hold not only touring cars and drift cars, but also wide off-road cars. The bag is also equipped with a belt to easily hold the machine for safe...
CHF 64.90
En stock  
+ −
Alu Front upper A Arm YD-4
YOK-Y4-008FUC
 
CHF 47.90
En stock  
+ −
Alu adjustable steering bell crunk set for YD-2
YOK-Y2-202VA
It is a variable aluminum steering bell crank that can be used in common with the YD - 2 series. Corresponding to the wide tread of the front which is the mainstream of recent RWD drift, we set the width of the tie rod pivot part of the center link right and left, and widely set the...
CHF 99.90
En stock  
+ −
Aluminum main chassis for YZ-2T
YOK-Z2-002TA
entspricht: Z2-002T
CHF 95.00
En stock  
+ −
Lexanschere / Lexan Schere
YOK-YT-CS2A
entspricht: YT-CS2
CHF 15.90
En stock  
+ −
Carbon Graphite Main Chassis
YOK-B9-00219
CHF 95.00
En stock  
+ −
Narrow Graphite Main Chassis Set für YD-2R inline
YOK-Y2-002RXVA
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF 189.90
En stock  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF 16.90
En stock  
+ −
Alu main Chassis (Midship) YZ CAL2 / DTM2S
YOK-Z2-0023
CHF 94.90
En stock  
+ −
Front HD Double Joint Univ. Shaft
YOK-B7-010FW
 
CHF 62.90
En stock  
+ −
“X30” 13 shock set (rear/short)
YOK-S4-S1M13
This is a F13mm big bore shock set. The M size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF 21.50
En stock  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
En stock  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF 94.10
En stock  
+ −
Karosserie Extrem PS13 SILVIA 1:10
YOK-SD-PS13BA
entspricht: SD-PS13B
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 46.90
En stock  
+ −
Graphite Rear Shock Tower YD-4
YOK-Y4-018
 
CHF 22.90
En stock  
+ −
Main Chassis YZ-2
YOK-Z2-002
 
CHF 89.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock  
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF 89.90
En stock  
+ −
Catégories
Véhicules RC
Voitures RC
Moto RC
Machines de construction et tracteurs RC
Camions RC
Chars RC
Accessoires et pièces détachées
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags