ERSATZTEIL-FINDER

Véhicules RC

Vous trouverez ici une vaste sélection de modèles de véhicules RC. En tant que spécialistes de nos propres pistes de course de voitures RC, nous avons tout pour les débutants et les professionnels.

Trier par:
Recommandé
96
Steel Rod End Ball for YZ-870C S-Size
YOK-YZ-205SS
This rod end ball ismade of steel for greatly increased durability and can be used in place of the rod end ball on the YZ-870c Super Dog Fighter's upper arm and tie rods.
CHF9.10
Rupture de stock
Standard Spring RD2.0
YOK-YS-RDS
Standard Springs for RD2.0 Kit
CHF6.80
Rupture de stock
Super Dog Fighter Decals
YOK-ZC-D4
These Decals are included in the YZ-870C.
CHF5.90
En stock  
+ −
Shock Cap Ball (Purple) for YD-2
YOK-Y2-S8PA
This is a shock cap ball used for the upper pivot of the YD-2 shock. Contains 4 pieces.
CHF9.50
En stock  
+ −
Shock Cap Ball (Red) for YD-2
YOK-Y2-S8RA
This is a shock cap ball used for the upper pivot of the YD-2 shock. Contains 4 pieces.
CHF9.50
En stock  
+ −
Front Wheel (Pink) 2.2 Inch for YZ-870C
YOK-YZ-821-2
The YZ-870C uses the standard 1.9-inch size tire/wheel used in the 1980s, but a new wheel is being introduced to allow the use of current 2.2-inch size tires. The YZ-870C's distinctive wheel hubs will be retained, but the wheel outer diameter will be increased to allow the use of 2.2-inch...
CHF8.90
En stock  
+ −
Rear Wheel (Pink) 2.2 Inch for YZ-870C
YOK-YZ-827-2
The YZ-870C uses the standard 1.9-inch size tire/wheel used in the 1980s, but a new wheel is being introduced to allow the use of current 2.2-inch size tires. The YZ-870C's distinctive wheel hubs will be retained, but the wheel outer diameter will be increased to allow the use of 2.2-inch...
CHF9.90
En stock  
+ −
Drift Package 2WD Pandem GR Supra Kit (Clear)
YOK-DP-GRA90
The famous "DRIFT PACKAGE", the pioneer of drift RC cars and synonymous with drift RC cars, is back in 2WD form! Based on a conventional assembly kit, this reasonably priced package includes a clear body and tires/wheels. If you purchase the steering gyro and running set, you can enjoy...
CHF283.10
En précommande, livraison quand l'article est disponible  
+ −
Drift Package 2WD Pandem GR Supra Kit (White)
YOK-DP-GRA90W
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF304.00
En précommande, livraison quand l'article est disponible  
+ −
Low Friction Drive Belt for BD10F
YOK-BD-309LWA
This is a low friction drive belt used when running stock motors in FWD drive cars such as BDFWD and BD10F. Made of a material that is more flexible than standard belts, it reduces driving resistance and increases top speed.
CHF16.90
En stock  
+ −
Aluminum Servo Mount MS1.0
YOK-MS-203
CHF35.90
Rupture de stock
Graphite Front Upper Deck MS1.0
YOK-MS-003F
CHF19.70
Rupture de stock
Graphite Rear Upper Deck MS1.0
YOK-MS-003R
CHF19.70
En stock  
+ −
Upper Arm Set MS1.0
YOK-MS-008U
CHF7.90
En stock  
+ −
Suspension Ball Cap Spacer (1.0/1.5mm) MS1.0
YOK-MS-009S
CHF5.70
Rupture de stock
Graphite Front Shock Tower MS1.0
YOK-MS-017
CHF22.90
En stock  
+ −
Aluminum Bell Crank Center Link
YOK-MS-201LBA
CHF21.40
Rupture de stock
Aluminum Steering Bell Crank MS1.0
YOK-MS-202SBA
CHF21.40
Rupture de stock
Aluminum Motor Mount MS1.0
YOK-MS-302M
CHF59.90
Rupture de stock
Aluminum Front Lower Bulkhead (A) MS1.0
YOK-MS-32FLA
CHF26.90
En stock  
+ −
Aluminum Front Lower Bulkhead (B) MS1.0
YOK-MS-32FLB
CHF26.90
En stock  
+ −
Aluminum Front Upper Bulkhead (A) MS1.0
YOK-MS-32FUA
CHF18.80
Rupture de stock
Aluminum Front Upper Bulkhead (B) MS1.0
YOK-MS-32FUB
CHF18.80
Rupture de stock
Aluminum Rear Lower Bulkhead (A) MS1.0
YOK-MS-32RLA
CHF26.90
En stock  
+ −
Aluminum Rear Lower Bulkhead (B) MS1.0
YOK-MS-32RLB
CHF26.90
En stock  
+ −
Aluminum Rear Upper Bulkhead (A) MS1.0
YOK-MS-32RUA
CHF18.80
Rupture de stock
Aluminum Rear Upper Bulkhead (B) MS1.0
YOK-MS-32RUB
CHF20.90
En stock  
+ −
Front Sway Bar Wire 1.1mm MS1.0
YOK-MS-412F1
CHF7.90
En stock  
+ −
Rear Sway Bar Wire 1.1mm MS1.0
YOK-MS-412R1
CHF7.90
En stock  
+ −
Aluminum Stabilizer Joint Ball (2pcs) MS1.0
YOK-MS-412SB
CHF8.00
Rupture de stock
Shock Piston 1.1mm x 6 Hole (2pcs) MS1.0
YOK-MS-S116
CHF4.60
Rupture de stock
Shock Shaft Guide (4pcs) MS1.0
YOK-MS-S2B
CHF5.90
En stock  
+ −
Spring Adjust Nut / O-Ring (2pcs) MS1.0
YOK-MS-S4AJ
CHF8.90
En stock  
+ −
Aluminum Upper Shock Cap Nut (2pcs) MS1.0
YOK-MS-S4C1
CHF7.90
En stock  
+ −
Aluminum Shock O-Ring Cap (2pcs)
YOK-MS-S4C2
CHF6.90
En stock  
+ −
Shock Cylinder (2pcs) MS1.0
YOK-MS-S4S
CHF17.90
En stock  
+ −
Shock Shaft (19.1mm/ 2pcs) MS1.0
YOK-MS-S5S
CHF5.90
En stock  
+ −
Linear Shock Springs (1.90/Red) MS1.0
YOK-MS-SSL190
CHF11.90
En stock  
+ −
Steel Turnbuckle 13mm (2pcs) MS1.0
YOK-MS-TB13
CHF5.70
Rupture de stock
Linear Shock Springs (1.95/Yellow) MS1.0
YOK-MS-SSL195
CHF11.90
Rupture de stock
Linear Shock Springs (2.00/Blue) MS1.0
YOK-MS-SSL200
CHF11.90
En stock  
+ −
Front Sway Bar Wire 1.0mm MS1.0
YOK-MS-412F0
CHF7.90
En stock  
+ −
Front Sway Bar Wire 1.2mm MS1.0
YOK-MS-412F2
CHF7.90
En stock  
+ −
Rear Sway Bar Wire 1.0mm MS1.0
YOK-MS-412R0
CHF7.90
En stock  
+ −
Rear Sway Bar Wire 1.2mm MS1.0
YOK-MS-412R2
CHF7.90
En stock  
+ −
Light Buckets für Mercury Sayka 1:10 klar
YOK-SD-MS15L
CHF15.90
En stock  
+ −
Light Buckets für Pandem GR86
YOK-SD-GR86L
CHF15.90
En stock  
+ −
Front Universal Bone (73mm/1pcs)
YOK-MO-010FWB
CHF7.90
En stock  
+ −
Brass front weight for MS1.0 (10g x 2)
YOK-MS-BWF10
This is a front ballast weight of 10g per side that can be used for MS1.0. Made of heavy brass, it effectively utilizes the tight space inside the suspension arms to increase front traction during acceleration. The contact area to the chassis is also minimized so as not to spoil the flex of the...
CHF17.90
En stock  
+ −
Mirror for Lexus RC-F
YOK-SP-LFGT3A
Plastic mirror set that just fits LEXUS RC-F GT3 body for touring cars.
CHF6.90
En stock  
+ −
M2x10mm BH Screw (10 pcs)
YOK-ZC-BH210
Button head screws 2mm thick and 10mm long. 10pcs.
CHF2.50
En stock  
+ −
Aluminum Front Bulkhead Bridge RD2.0/SD2.0
YOK-RD-302FB
This aluminum front bulkhead bridge is recommended for RD2.0 and SD2.0. It increases the rigidity of the front area and improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been...
CHF27.90
En stock  
+ −
Aluminum suspension mount "E" for RD2.0
YOK-RD-301AE
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
En stock  
+ −
F5.5mm Titanium Rod End Balls (2 each) 6mm
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
En stock  
+ −
F5.5mm Titanium Rod End Balls (2 each) 8mm
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Rupture de stock
F5.5mm Titanium Rod End Balls (2 each) 10mm
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
En stock  
+ −
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
En stock  
+ −
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
En stock  
+ −
Wing for Mercury Sayaka Special S15
YOK-SD-MS15W
This is a spare wing set for MERCURY SAYAKA SPECIAL S15. Made of polycarbonate, the set includes the wing body, side dams, front canards, and side canards. Wing stay is not included. Please prepare aluminum wing stay (D-057LA etc.) separately.
CHF15.90
En stock  
+ −
Linear Shock Spring 1.80 Purple for MS1.0
YOK-MS-SSL180
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
En stock  
+ −
Linear Shock Spring 1.85 White for MS1.0
YOK-MS-SSL185
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
En stock  
+ −
Blank piston for SO/MO f13mm Shock 1.5mm thick
YOK-S4-SB1315
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
En stock  
+ −
Blank piston for SO/MO f13mm Shock 2mm thick
YOK-S4-SB1320
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Rupture de stock
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
En stock  
+ −
2.2-inch Wheel for YZ-870C Front (White)
YOK-YZ-821W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the use of current 2.2-inch size tires while retaining the YZ-870C's distinctive wheel hubs, making it possible to choose the best tires from a varied lineup for a variety of surfaces! The...
CHF8.90
En stock  
+ −
2.2-inch Wheel for YZ-870C Rear (White)
YOK-YZ-827W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the useof current 2.2-inch size tires while retaining the YZ-870C's distinctivewheel hubs, making it possible to choose the best tires from a variedlineup for a variety of surfaces! The...
CHF9.90
En stock  
+ −
SO1.0/2.0 High Traction Offset Rear Suspension Arm
YOK-Z2-008R3H
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves turning performance.
CHF20.90
En stock  
+ −
MO2.0 Axle for Double Joint Universal
YOK-MO-010FWA
Replacement axle for front double-joint universal released as an optional part for MO2.0. 1 piece.
CHF6.90
En stock  
+ −
Caster Measuring Jig for MS1.0
YOK-YT-CMJ
This tool is attached to the steering block to facilitate caster measurement when measuring MS1.0 alignment. Compatible with various touring car alignment gauges.
CHF10.30
En stock  
+ −
Front Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-821Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF8.90
En stock  
+ −
Rear Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-827Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF9.90
En stock  
+ −
Alu Shim 3x6x4 (Black, 8pcs)
YOK-ZC-A3640B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
En stock  
+ −
Alu Shim 3x6x5 (Black, 8pcs)
YOK-ZC-A3650B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
En stock  
+ −
Alu Shim 3x6x6 (Black, 8pcs)
YOK-ZC-A3660B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
En stock  
+ −
Graphite Lightweight front lower suspension Arm
YOK-B12-008FR
Graphite Lightweight front lower suspension arm (right) +0.5mm for BD12/11 This lightweight graphite suspension arm has been made lighter than before by changing the cut line, and has further improved maneuverability and traction. Compared to the standard suspension arm of the BD12, it is...
CHF36.90
En stock  
+ −
Titanium Turnbuckle 65mm (2pcs)
YOK-ZC-TB65T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF12.80
En stock  
+ −
Titanium Turnbuckle 75mm (1pcs)
YOK-ZC-TB75T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF14.80
En stock  
+ −
Turnbuckle Upper Arm Rod End for MS1.0
YOK-MS-008TR
This is a replacement plastic part for the turnbuckle upper arm, an optional part for MS1.0
CHF9.90
En stock  
+ −
O-Ring for YZ-870C Shock Cap 2mm (8pcs)
YOK-YS-7B2
O-rings for drain screws used on aluminum shock caps for YZ-870C.The inner diameter is F2mm and comes in packs of 8.
CHF3.40
En stock  
+ −
Steel M3 Flanged Lock Nut (4pcs)
YOK-ZC-N3FLS
A 3mm steel flange nut. The back of the flange has a serrated groove, allowing you to securely lock plastic parts. Pack of 4.
CHF3.40
En stock  
+ −
M2x6mm Button Head Screw (10pcs)
YOK-ZC-BH26A
M2x6mm button head screw (f4.2 head, pack of 10)
CHF4.60
En stock  
+ −
Aluminum Anti-Roll Bar Ball (Hard/2pcs)
YOK-ZC-206AHA
Aluminum ball studs for use with stabilizers, etc. The surface is hard anodized for high durability. Pack of 2.
CHF6.80
En stock  
+ −
"X30" 13 Shock Body (Front) for SO2.0/MO2.0
YOK-S4-S4S13
This is an aluminum small size cylinder for F13mm big bore shocks. Pack of 1.
CHF12.50
En stock  
+ −
"X30" 13 Shock Body (Rear/Short) for SO2.0/MO2.0
YOK-S4-S4M13
This is an aluminum M-size cylinder for F13mm big bore shocks. 1 piece included.
CHF12.50
En stock  
+ −
"X30" Shock Body (Rear) for MO1.0
YOK-S4-S4L13
This is an aluminum large size cylinder for a F13mm big bore shock absorber that fits the rear of the MO1.0. 1 piece included.
CHF12.50
En stock  
+ −
Aluminum motor mount for YZ-2T
YOK-Z2-304TA
This is an aluminum motor mount for the YZ-2T 2WD racing truck. It is black anodized with beveled edges.
CHF29.90
En stock  
+ −
Molded Main Chassis for RO1.0
YOK-Z2-002RO
This is the standard main chassis for the RO1.0. It is a one-piece resin main chassis that provides moderate flexibility to improve driving stability.
CHF32.50
En stock  
+ −
Aluminum Steering Bell Crank Set for RO1.0/SO1.0
YOK-Z2-201SBA
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF74.90
Rupture de stock
Tungsten 3/32 balls for differential (14 pieces)
YOK-Z2-505TA
These are ultra-high-precision tungsten carbide differential balls. The precision of the ball surface improves the smooth operation of the differential and makes it highly wear-resistant. This product comes in a pack of 14, perfect for the Z2-500 ball differential used on the YZ-2 and YZ-4.
CHF12.80
En stock  
+ −
Molded Shock Towers for RO1.0
YOK-Z2-017S
Standard shock tower for RO1.0. Front and rear set.
CHF11.40
En stock  
+ −
Rear Hub Carrier for RO1.0
YOK-Z2-415R1
This is a standard plastic rear hub carrier for the RO1.0. It comes in a set of two, with the same shape for the left and right.
CHF10.30
En stock  
+ −
Clear Lexan Body for RO1.0
YOK-Z2-101RO
This is the standard RO1.0 polycarbonate body. To use, please cut off the excess and paint it with polycarbonate paint. *The photo is an example of how to paint the model. The product is made of clear polycarbonate, so please prepare a dedicated spray paint separately. *Window masking...
CHF23.10
En stock  
+ −
Light Unit Plastic Parts (ORC Z33)
YOK-SD-Z33LA
CHF7.10
En stock  
+ −
F.shock body
YOK-YS-4S-8
CHF13.90
En stock  
+ −
R. Shock Body
YOK-YS-4L-8
CHF14.50
En stock  
+ −
Graphite Rear Chassis (2.4mm) for SD2.0
YOK-Y2-002S2R
CHF27.90
En stock  
+ −
Catégories
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags