Français (CH)
ERSATZTEIL-FINDER

Véhicules RC

Vous trouverez ici une vaste sélection de modèles de véhicules RC. En tant que spécialistes de nos propres pistes de course de voitures RC, nous avons tout pour les débutants et les professionnels.

Trier par:
Recommandé
Montrer:
96
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
En stock  
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
En stock  
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF 21.50
En stock  
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF 22.90
En stock  
+ −
Clump Wheel Hub (5.0mm·Black)
YOK-BD-011CBA
entspricht: BD-011CB
CHF 12.90
En stock  
+ −
Rear ESC mount for YD-2 series (Purple)
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
En stock  
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF 22.50
En stock  
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF 22.50
En stock  
+ −
Karosserie GReedy R35 Spec D ohne Decals 1:10
YOK-SD-GR35BA
entspricht: SD-GR35B
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 54.90
En stock  
+ −
Réduction 50%
Réduction 50%
BL-EP6 Brushless speed controller (programmer incl
YOK-BL-EP6A
It is a brushless speed controller that comes with a programmer and realizes a reasonable price while supporting each category of on, off, and drift. In addition to Yokomo's sensor-type brushless motors, it is also possible to drive general-purpose sensorless motors. Of course, it is recommended...
CHF 45.00 CHF 89.90 -50%
En stock  
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF 89.90
En stock  
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF 89.90
En stock  
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF 5.90
En stock  
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF 89.90
En stock  
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
En stock  
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2A
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF 75.90
Rupture de stock
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
En stock  
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF 44.90
En stock  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
En stock  
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF 6.50
En stock  
+ −
Shock Body
YOK-B9-S4S
CHF 29.90
En stock  
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
En stock  
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF 9.90
En stock  
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF 29.90
En stock  
+ −
Aluminum Heat Sink Motor Plate RS2.0
YOK-RS-302HM
This is an optional part for RS2.0, aluminum motor plate. It is shaped like a heat sink and improves the cooling effect of the motor. It suppresses heat leakage of the motor during driving and improves power efficiency. Effective when the temperature rises or when running outdoors during the day.
CHF 29.90
En stock  
+ −
10×6mm Bearing
YOK-BB-106-4A
entspricht: BB-106-4
CHF 13.90
En stock  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF 17.90
En stock  
+ −
Aluminum frame 30mm Cooling fan (Silver)
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 33.90
Rupture de stock
LCG short Li-po enabled Graphite Battery Holder
YOK-B10-118G1A
entspricht: B10-118G1
CHF 87.90
En stock  
+ −
Steering block L/R
YOK-Z2-415SH3A
Hard type
CHF 7.90
En stock  
+ −
LED Set für BN Sports Toyota JZX100 Mark2
YOK-SD-JZXBNL
This LED set is designed for the BN Sport Mark II. The set includes 6 each of white/red/yellow bullet-type LEDs for headlights, tail lights, and position/wind indicators, and comes with a wiring terminal, extension cable, and connector cable. By drilling holes with a reamer, etc. in the light...
CHF 43.90
En stock  
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF 21.90
En stock  
+ −
Hard coat pivot ball for BD7 shock cap/end (4pcs)
YOK-B7-S8HA
entspricht: B7-S8H
CHF 12.95
En stock  
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF 21.90
En stock  
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF 21.90
En stock  
+ −
DRIFT Oil
YOK-D-013A
Bearing oil made by Liqui Moly. Less friction and reduced wear.
CHF 13.90
En stock  
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF 21.90
En stock  
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF 17.50
En stock  
+ −
RP Driftfelge High Tract.(6mm Offset) weiss 1paar
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T he new high traction wheels are all 6mm offsets and with 3 selectable colors, Titanium, Yellow and White. Besides, the edge of the...
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF 9.50
En stock  
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF 12.50
En stock  
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF 28.90
En stock  
+ −
Ventilated Dual Slipper Set YZ-2/B-Max2
YOK-Z2-670V
CHF 39.90
En stock  
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF 28.90
En stock  
+ −
Aluminum Servo Mount SO3.0
YOK-SO-203
CHF 28.90
En stock  
+ −
Front Balance Weight (L/R 1 each·10g)
YOK-B7-BWF10
CHF 29.90
En stock  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF 42.90
En stock  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
En stock  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF 17.90
En stock  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
En stock  
+ −
Steering Block BD9/BD10
YOK-B9-415SA
entspricht: B9-415S
CHF 11.50
En stock  
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
En stock  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
En stock  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF 11.50
En stock  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
En stock  
+ −
Alum.Main Chassis for MO3.0
YOK-MO-002-3
CHF 84.90
En stock  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF 7.90
En stock  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
En stock  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
En stock  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series. It is a type used on the front side of the rear suspension, it increase the rear traction by increasing the weight compared to standard aluminum
CHF 26.90
En stock  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF 41.90
En stock  
+ −
Front W/J Universal Set (Bearing type)
YOK-MS-010FWS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF 83.80
En stock  
+ −
Chassis balance weight for YZ-2T
YOK-Z2-002RWTA
entspricht: Z2-002RWT
CHF 16.50
Rupture de stock
Aluminium Radträger 2Stk. MS2.0
YOK-MS-415A-2
CHF 41.90
En stock  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF 27.90
En stock  
+ −
Alu Servohebel 23mm Clamp 25T Spline
YOK-Y2-204523A
entspricht: Y2-204523
CHF 18.90
En stock  
+ −
Aluminum Center Link BD9/BD10
YOK-B9-201LBAA
including Ball bearing
CHF 27.90
En stock  
+ −
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF 27.90
En stock  
+ −
Aluminum Susp M Spacer 1.0mm BD7/BD8/BD9/BD10
YOK-B7-SS10A
entspricht: B7-SS10
CHF 17.90
En stock  
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF 13.90
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF 11.90
En stock  
+ −
Kingpin set YZ-2
YOK-Z2-414A
 
CHF 7.90
En stock  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF 41.50
En stock  
+ −
Front Wheel
YOK-B4-821A
entspricht: B4-821
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 5.90
En stock  
+ −
Side diffuser set for YD-2S
YOK-Y2-001SDA
Sideways grip feel will be improved. Chassis will be more stabilized and a smooth grip feeling can be realized also increasing top speed. By decreasing the gap between the chassis and the car body, the rigidity of the body is also improved.
CHF 19.90
En stock  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF 27.40
En stock  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF 13.50
En stock  
+ −
Steering Block L/R YZ-4
YOK-Z4-415SA
 
CHF 8.90
En stock  
+ −
Upper Deck
YOK-B7-00314
 
CHF 26.90
En stock  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF 26.90
En stock  
+ −
Front/Rear wing mount for YZ-2DTM3/CAL3
YOK-Z2-001W3A
entspricht: Z2-001W3
CHF 10.90
En stock  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF 26.90
En stock  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF 26.90
En stock  
+ −
Yokomo Alu Wing Stay silber
YOK-D-056A
entspricht: D-056
CHF 12.90
En stock  
+ −
Yokomo Werkzeugset 1.5/2.0mm Imbus 5.5/7mm Stecksc
YOK-YT-YRTSBA
entspricht: YT-YRTSB
CHF 26.90
En stock  
+ −
MO2.0 Body Shell w/Mask. (Std.) for MO Series
YOK-MO-101
CHF 26.90
En stock  
+ −
Aluminium 8.0mm cramp wheel hub for YD-2
YOK-Y2-011CB8A
entspricht: Y2-011CB8
CHF 12.90
En stock  
+ −
Rear Transmission Case L/R (Carbon) YZ-4
YOK-Z4-302R
 
CHF 11.50
En stock  
+ −
Hard Graphite main Chassis YR-10 Formula
YOK-YR-02H
Hard graphite main chassis for YR-10 Formula
CHF 79.90
En stock  
+ −
F3.5 Suspension arm pin bush for YZ-2DTM3/CAL3
YOK-Z2-300BSA
for F3.5 inner pin
CHF 12.90
En stock  
+ −
Alu Susp. Mount Set YD-2
YOK-Y2-301AS
 
CHF 79.90
En stock  
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF 79.90
En stock  
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF 79.90
En stock  
+ −
YZ-2 CAL2 S2 LW Karosserie (w. masking)
YOK-Z2-DTMBLA
entspricht: Z2-DTMBL
CHF 27.90
En stock  
+ −
Alu rear hub carrier (Toe-in 0.5°) for B-MAX4III
YOK-B4-415R05
 
CHF 39.90
En stock  
+ −
Achsschenkel Alu
YOK-C-415A
 
CHF 39.90
En stock  
+ −
Alu Cap for Gear Diff Case YD-2/YZ-2
YOK-Z2-503GHCA
entspricht: Z2-503GHC
CHF 15.90
En stock  
+ −
Catégories
Véhicules RC
Voitures RC
Moto RC
Machines de construction et tracteurs RC
Camions RC
Chars RC
Accessoires et pièces détachées
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags