Véhicules RC

Vous trouverez ici une vaste sélection de modèles de véhicules RC. En tant que spécialistes de nos propres pistes de course de voitures RC, nous avons tout pour les débutants et les professionnels.

YOK-Y2-204Z26A
Aluminum servo horn for YD-2ZX. It has a shape that matches the mounting method where the servo is placed directly on the main chassis, and is a type that is fixed with a clamp through an adapter that matches the servos of each company.
CHF 21.00
En stock  
+
CHF 41.90
En stock  
+
CHF 62.90
En stock  
+
YOK-YT-HGTC2
Height gauge for touring cars that require detailed measurements. Made from high precision aluminium, the front and back can be used separately to measure in 0.1mm increments. The engraving is large and easy to read, allowing quick readings even during busy race intervals.
CHF 20.90
En stock  
+
CHF 27.90
En stock  
+
CHF 30.80
En stock  
+
YOK-Y2-018ARSA
Yokomo will release new Aluminum Shock Tower for YD-2S series which is a higher mount motor layout, 4 gear transmission RWD drift chassis kit. This new shock tower will perform the best freedom in super set with a rear short suspension arm which has also released just before. The...
CHF 49.90
En stock  
+
YOK-B9-BW20A
20g
CHF 20.50
En stock  
+
CHF 59.90
En stock  
+
YOK-BM-1S12
 
CHF 59.90
En stock  
+
CHF 8.90
En stock  
+
CHF 59.90
En stock  
+
CHF 59.90
En stock  
+
YOK-B2-009ARA
entspricht: B2-009AR
CHF 5.20
En stock  
+
YOK-Y2-008RAW
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 59.90
En stock  
+
CHF 34.90
En stock  
+
CHF 59.90
En stock  
+
YOK-RD-415AR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+
YOK-Y2-R001BA
entspricht: Y2-R001B
CHF 34.90
En stock  
+
YOK-RD-415ARBL
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock  
+
CHF 29.90
En stock  
+
CHF 29.90
En stock  
+
YOK-Y2-P001BA
entspricht: Y2-P001B
CHF 34.90
En stock  
+
CHF 29.90
En stock  
+
YOK-Y2-008RS2A
entspricht: Y2-008RS2
CHF 29.90
En stock  
+
CHF 29.90
En stock  
+
CHF 26.90
En stock  
+
YOK-B10-32UBA
Chamfered Front / Rear Upper Bulkhead [B] FR / RL for BD-10LC / BD-10 / BD919
CHF 29.90
En stock  
+
YOK-Z2-304THD
This aluminum motor mount can be used with SO1.0 or YZ-2 series. It is thicker than the kit's standard motor mount and is designed for heavy-duty use, so it is less likely to bend even in a severe crash.
CHF 29.90
En stock  
+
YOK-RP-103PUA
entspricht: RP-103PU
CHF 11.00
En stock  
+
YOK-YT-YMB
This nylon fabric multi-bag is ideal for storing tools, parts, spare tires, etc.Combined with the machine bag (YT-28MB), it can be used as a bag-in-bag. It is possible to keep the inside of the bag neat and tidy by adding storage for small items.
CHF 29.90
En stock  
+
CHF 19.90
En stock  
+
YOK-ZC-S30A
entspricht: ZC-S30
CHF 5.90
Rupture de stock
YOK-YC-1A
entspricht: YC-1
CHF 19.90
En stock  
+
CHF 19.90
En stock  
+
YOK-ZC-S100SA
entspricht: ZC-S100S
CHF 6.90
En stock  
+
YOK-Z4-003
 
CHF 19.90
En stock  
+
YOK-B8-S4OC
Black anodized and bevel edge chamferred and marked with the right location for the quick set up while at the race time.
CHF 19.90
En stock  
+
YOK-ZC-TB52T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 13.90
En stock  
+
YOK-RP-090A
YOKOMO released new optional rotor for RP(Racing Performer) motors. That is High Precision Cutting Titanium Screw Set for RP motors. It is a titanium screw set which was made thru high precision cutting technology. This sets are consists of 6 titanium screws, 3 for the cap screw...
CHF 19.90
En stock  
+
CHF 14.90
En stock  
+
YOK-YS-150B
entspricht: YS-150A
CHF 5.90
En stock  
+
YOK-Z4-002SP
 
CHF 14.90
En stock  
+
CHF 14.90
En stock  
+
CHF 23.50
En stock  
+
YOK-Y2-202BB
This aluminum base increases the mounting rigidity of the bellcrank post and allows the offset of the bellcrank to be changed. It expands the options for the Ackermann ratio, which is most important for drift cars.
CHF 14.90
En stock  
+
CHF 11.90
En stock  
+
YOK-Z2-206-12A
entspricht: Z2-206-12
CHF 6.90
En stock  
+
CHF 11.90
En stock  
+
YOK-S4-S813R
A resin cap for F13mm big bore shocks. Drain screw included. Contains 2 pieces.
CHF 8.50
En stock  
+
Réduction 46%
Réduction 46%
YOK-RPM-M435A
Rotor 12.2x7.25x24.2 10020 Kv
CHF 59.00 CHF 109.00 -46%
En stock  
+
YOK-S4-S2LTA
entspricht: S4-S2LT
CHF 19.50
En stock  
+
Réduction 46%
Réduction 46%
YOK-RPM-M445A
Rotor 12.2 x 5.0 x 24.2 7166Kv
CHF 59.00 CHF 109.00 -46%
En stock  
+
Réduction 46%
Réduction 46%
YOK-RPM-M4215A
Rotor 12.5 x 5.0 x 24.2 1459Kv
CHF 59.00 CHF 109.00 -46%
En stock  
+
YOK-Z2-412R3A
6pcs/set
CHF 33.30
Rupture de stock
YOK-S4-002SPG
These graphite-mixed resin molded side plates can increase the rigidity of the YZ-4SF2 chassis. It is especially effective when driving on high grip surfaces, and improves stability when entering a corner, enabling cornering with good steering response. It is effective not only on...
CHF 19.50
En stock  
+
CHF 14.50
En stock  
+
YOK-YC-3A
entspricht: YC-3
CHF 8.90
En stock  
+
CHF 57.90
En stock  
+
CHF 57.90
En stock  
+
CHF 11.50
En stock  
+
YOK-S4-304-2A
entspricht: S4-304-2
CHF 57.90
En stock  
+
YOK-SP-LFGT3BL
This is the light weight body of the LEXUS RC F GT3. Compared to the standard body, the weight is reduced by approximately 20%, which greatly contributes to the improvement of the car's athletic performance. It is effective for circuit driving with higher grip.
CHF 57.90
En stock  
+
YOK-Y2-008R-A
New from Yokomo come these Long stroke lower suspension arm for YD2 and YD-4.
CHF 8.50
En stock  
+
CHF 28.90
En stock  
+
CHF 28.90
En stock  
+
CHF 22.90
En stock  
+
CHF 28.90
En stock  
+
CHF 28.90
En stock  
+
CHF 22.90
En stock  
+
CHF 28.90
En stock  
+
CHF 28.90
En stock  
+
YOK-S4-001WA
entspricht: S4-001W
CHF 10.90
En stock  
+
YOK-B9-202SBAA
entspricht: B9-202SBA
CHF 28.90
En stock  
+
YOK-SD-017TA
entspricht: SD-017T
CHF 9.50
En stock  
+
YOK-B8-180L
 
CHF 9.50
En stock  
+
CHF 13.40
En stock  
+
YOK-RP-6313Y6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. The new high traction wheels are all 6mm offsets and with 3 selectable colors, Titanium, Yellow and White. Besides, the edge of...
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF 9.50
En stock  
+
YOK-MS-002S
This main chassis for MS1.0 is made of FRP material with soft resilience. It is especially effective on low-grip surfaces and adapts well to uneven road surfaces, enabling efficient traction gains.
CHF 56.90
En stock  
+
YOK-ZC-204523A
entspricht: ZC-204523
CHF 18.90
En stock  
+
CHF 18.90
En stock  
+
CHF 18.90
En stock  
+
YOK-B4-009BA
entspricht: B4-009B
CHF 5.50
En stock  
+
YOK-Z2-412FTA
entspricht: Z2-412FT
CHF 18.90
En stock  
+
YOK-B11-OP3A
Aluminum screw & titanium ball end that reduces the weight of the upper part of the chassis and promotes a lower center of gravity as well as weight reduction. All are high-precision parts manufactured by carving, and are gems that improve the quality of machine make-up. In particular, the...
CHF 44.90
En stock  
+
YOK-Z2-670HDA
entspricht: Z2-670HD
CHF 18.90
En stock  
+
YOK-YZ-S8A
This aluminum shock cap fits the YZ-870C shock.The drain screw makes it easy to assemble the aeration system, and the look is close to the original.
CHF 18.80
En stock  
+
CHF 24.90
En stock  
+
YOK-Y2-003SRA
This is the upper deck set for the S series used in the YD-2SXIII. It comes with a 2.5mm thick matte graphite upper deck and aluminum parts for connecting to the front bulk and rear gearbox. * The front bulkhead is compatible with aluminum slide racks (Y2-202BH). Please note that it cannot be...
CHF 55.90
En stock  
+
YOK-B9-00319A
entspricht: B9-00319
CHF 27.90
En stock  
+
CHF 27.90
En stock  
+
YOK-B4-011FA
entspricht: B4-011F
CHF 8.90
En stock  
+
CHF 27.90
En stock  
+
YOK-Z2-002S31A
entspricht: Z2-002S31
CHF 13.90
En stock  
+
CHF 27.90
En stock  
+
CHF 27.90
En stock  
+
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags