ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Ordnen nach:
Empfohlen
48
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
Auf Lager  
+ −
Brass front weight for MS1.0 (10g x 2)
YOK-MS-BWF10
This is a front ballast weight of 10g per side that can be used for MS1.0. Made of heavy brass, it effectively utilizes the tight space inside the suspension arms to increase front traction during acceleration. The contact area to the chassis is also minimized so as not to spoil the flex of the...
CHF17.90
Auf Lager  
+ −
Main Chassis FRP 2.5mm for MS1.0
YOK-MS-002S
This main chassis for MS1.0 is made of FRP material with soft resilience. It is especially effective on low-grip surfaces and adapts well to uneven road surfaces, enabling efficient traction gains.
CHF56.90
Auf Lager  
+ −
Mirror for Lexus RC-F
YOK-SP-LFGT3A
Plastic mirror set that just fits LEXUS RC-F GT3 body for touring cars.
CHF6.90
Auf Lager  
+ −
M2x10mm BH Screw (10 pcs)
YOK-ZC-BH210
Button head screws 2mm thick and 10mm long. 10pcs.
CHF2.50
Auf Lager  
+ −
Aluminum Front Bulkhead Bridge RD2.0/SD2.0
YOK-RD-302FB
This aluminum front bulkhead bridge is recommended for RD2.0 and SD2.0. It increases the rigidity of the front area and improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been...
CHF27.90
Auf Lager  
+ −
Aluminum Rear Shock Lower Adapter RD2.0
YOK-RD-008RS
This Aluminum mounting Adapter holds the lower rear shock of the RD2.0. By increasing the rigidity of the shock mounting, it improves operationg precision and increaser road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase...
CHF23.90
Auf Lager  
+ −
Aluminum suspension mount "E" for RD2.0
YOK-RD-301AE
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 6mm
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 8mm
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
F5.5mm Titanium Rod End Balls (2 each) 10mm
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
Auf Lager  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
Auf Lager  
+ −
Scale Antenne 19cm, Drahtstärke 1.5mm
HSH-ACC-09819
Coole Scale Antenne 19cm, Drahtstärke 1.5mm Gewinde mit Schraube, M3 zu Befestigung.
CHF6.90
Auf Lager  
+ −
Scale Antenne 26cm, Drahtstärke 1.5mm
HSH-ACC-09826
Coole Scale Antenne 26cm, Drahtstärke 1.5mm Gewinde mit Schraube, M3 zu Befestigung.
CHF7.90
Auf Lager  
+ −
Beadlock Wheel Felgen Montage Helfer, Alu
HSH-ACT-087
Beadlock Wheel Felgen Montage Helfer, Alu Bei gewissen Beadlock Felgen ist die Montage sehr mühsam, dank diesem Tool können die Felgenhälften einfach zusammen gezogen werden, so dass, das Ansetzen der Felgenschrauben möglich wird.
CHF9.90
Auf Lager  
+ −
Kupplungsbeläge Nitro, Allround, 1/8 mit Feder
HSH-UP-55
Kupplungsbeläge Nitro, Allround, 1/8 mit Feder Max. Breite: 10mm Max. Länge 19mm Lochdurchmesser, ca. 2mm 3x Beläge 3x Federn
CHF8.90
Auf Lager  
+ −
Garagen Lift, Elefant, elektrisch, 1/10
HSH-ACC-CRANE
Garagen Lift, Elefant, elektrisch, 1/10 Elektrisch, perfekt für jede Scaler Garage, Diorama, etc. Betrieben wird der Lift mit 6 Volt, entweder ein Batteriefach und normale AA verwenden, oder dann eine 6V Akku NiMh. (siehe benötigte Zusatzprodukte)
CHF32.90
Auf Lager  
+ −
Optifuel-Optimix Heli 16% (5L)
11.OH1618K
VERSAND IST NICHT MOEGLICH, nur Abholung. 16% Nitromethan und 18% Synthetic Öl. Kein Versand möglich! Anwendungsbereich: Heli, Flugzeuge und Boote
CHF72.50
Auf Lager  
+ −
Wing for Mercury Sayaka Special S15
YOK-SD-MS15W
This is a spare wing set for MERCURY SAYAKA SPECIAL S15. Made of polycarbonate, the set includes the wing body, side dams, front canards, and side canards. Wing stay is not included. Please prepare aluminum wing stay (D-057LA etc.) separately.
CHF15.90
Auf Lager  
+ −
Linear Shock Spring 1.80 Purple for MS1.0
YOK-MS-SSL180
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Linear Shock Spring 1.85 White for MS1.0
YOK-MS-SSL185
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 1.5mm thick
YOK-S4-SB1315
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2mm thick
YOK-S4-SB1320
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Front (White)
YOK-YZ-821W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the use of current 2.2-inch size tires while retaining the YZ-870C's distinctive wheel hubs, making it possible to choose the best tires from a varied lineup for a variety of surfaces! The...
CHF8.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Rear (White)
YOK-YZ-827W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the useof current 2.2-inch size tires while retaining the YZ-870C's distinctivewheel hubs, making it possible to choose the best tires from a variedlineup for a variety of surfaces! The...
CHF9.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Suspension Arm
YOK-Z2-008R3H
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves turning performance.
CHF20.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF23.90
Auf Lager  
+ −
MO2.0 Axle for Double Joint Universal
YOK-MO-010FWA
Replacement axle for front double-joint universal released as an optional part for MO2.0. 1 piece.
CHF6.90
Auf Lager  
+ −
Caster Measuring Jig for MS1.0
YOK-YT-CMJ
This tool is attached to the steering block to facilitate caster measurement when measuring MS1.0 alignment. Compatible with various touring car alignment gauges.
CHF10.30
Auf Lager  
+ −
Karosserie GTR 1/8 Arrma Vendetta klar
BDAR8-GTR
  Premium Quality  first of all Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread:  the best or nothing . To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in...
MaterialLexan AuswahlhilfeFlachbahn Massstab1:8 EinsatzOn-Road Lackierungunlackiert
CHF82.50
Auf Lager  
+ −
Front Bumper für P-GT3R
BDARA-FOMPGT3R
Front ARRMA bumper foam  for P-GT3R body shell Specially designed to be installed in place of the original one , our foam is modeled at perfection on the P-GT3R body shapes and thanks to the precision laser cutting its shape eliminates any air turbulence that is generated under...
CHF22.90
Auf Lager  
+ −
Vorderachsen 2 Stück
LC5002
CHF9.00
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Differential Getriebe Abdeckung
LC5003
CHF6.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Dämpferbrücke vorne und Verstärkung
LC5005
CHF6.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Querlenkerstifte vorne BHC1
LC5007
CHF5.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Bumper vorne mit Querlenkerhalter und Verstärkung BHC1
LC5008
CHF6.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Lenkgestänge Set BHC1
LC5009
CHF8.00
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Servohalterung mit Servoarm BHC1
LC5010
CHF6.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Chassies Alu 2.00mm BHC1
LC5011
CHF17.70
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Seitenstreben BHC1
LC5012
CHF8.00
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Batteriehalterung BHC1
LC5013
CHF6.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Lunkungssteher BHC1
LC5014
CHF6.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Lenkungsbuchsen BHC1
LC5015
CHF4.50
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Querlenker hinten BHC1
LC5016
CHF8.00
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Querlenkerstifte hinten BHC1
LC5017
CHF5.80
Auf Lager bei Lieferant  
Externes Lager. Lieferung in ca. 8 Werktagen.  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller
    Alle zeigen (250)
Abmessungen
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Anschluss
Dekortyp
Frequenz
Material
Preis

CHF  –  CHF

  • ‎CHF0.2
  • ‎CHF4599
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (19)
Ära
Kanäle
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Spannung
Fertigungsgrad
Max. Geschwindigkeit
    Alle zeigen (11)
Marke
    Alle zeigen (67)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags