Français (CH)
ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Trier par:
Recommandé
Montrer:
12
Alu C-hub Carrier for RTC (BD8 und BD7)
YOK-B8-RTC-15
The new C-hub carrier is made by high quality aluminum made and designed with new cantilever type for more light weight while having sufficient strength.
CHF 47.90
En stock  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF 12.20
En stock  
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 47.90
En stock  
+ −
Alum.St.Bellcrank set for RO1.0/SO1.0
YOK-Z2-201SBS
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF 71.80
En stock  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF 32.90
En stock  
+ −
Lipo Bag Team Yokomo
YOK-YB-LSBB
Battery bag for charging and storing Li-po batteries. The flame-retardant material prevents the spread of fire in the unlikely event that the battery catches fire. It has a safe large capacity and can hold 6 short batteries, making it convenient for storage and transportation. Internal...
CHF 23.90
En stock  
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF 46.90
En stock  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout! ¦ The front springs are wound with a high pitch, the short high response spring is suitable for the high traction YD-2 series. Increasing the front...
CHF 44.90
En stock  
+ −
Rear short ”X30” shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF 69.90
En stock  
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3GA
entspricht: Z2-008F3G
CHF 15.90
En stock  
+ −
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF 69.90
En stock  
+ −
Aluminum Front Solid Axle Set for RS1.0/RS2.0
YOK-RS-501SS
A new solid axle kit has been long awaited by RS riders looking to improve their times! Lighter than a standard geared differential, it eliminates unnecessary differential operation, resulting in a more stable ride. It is particularly effective on high grip surfaces such as carpet, providing...
CHF 69.90
En stock  
+ −
Catégories
Accessoires et pièces détachées
Combo avec Controler
Matériaux de décoration
pièces de rechange
Carosseries
Accessoires de carrosserie
Accessoires pour des camions
Moteur
roue et pneu
Schablonen (Paint Masks)
Tuning
+6Plus
Voitures RC
Moto RC
Machines de construction et tracteurs RC
Camions RC
Chars RC
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (255)
Compatibilité
    Afficher tout (90)
Abmessungen
Auswahlhilfe
    Afficher tout (29)
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (18)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (67)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags