Deutsch (CH)
ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Ordnen nach:
Empfohlen
Zeigen:
96
Alu Conversion Kit für Yokomo SD
HSH-YOK-ALUCONV
Alu Conversion Kit für Yokomo SD Aluminium blau, inkl. Kugellager
CHF 69.90
Auf Lager
+ −
Alu Steering Hub Carrier YZ-2
YOK-Z2-413A
Aluminum Steering Hub Carrer will enable more rigid handling and more linear handring for the conventional YZ-2
CHF 59.90
Auf Lager
+ −
"Teams" Light weight FLEX Chassis Set für YD-2
YOK-Y2-002TSA
Team Yokomo's competition drift brand, Teams, is proud to announce the release of the new light weight flex chassis set for the YD-2 series. The lightweight graphite main chassis plate and special lightweight battery holder provide the right amount of rigidity and traction for a more...
CHF 209.00
Auf Lager
+ −
Aluminum Steering Bellcrank Set for RD2.0
YOK-RD-202A
Aluminum steering bellcrank set for RD2.0. By adding a forward lean angle to the wiper post, it reduces bump changes when a cutting angle is added and shows neutral characteristics. Also, the servo rod mounting length can be adjusted with a spacer, allowing the feeling to be changed according to...
CHF 69.00
Auf Lager
+ −
Universal Shaft 68mm Bone DTM2
YOK-Z2-01068A
entspricht: Z2-01068
CHF 34.90
Auf Lager
+ −
Motor Mount
YOK-B9-302MA
entspricht: B9-302M
CHF 49.50
Auf Lager
+ −
RTC Separate Suspension mount (B)
YOK-B9-RTC-05A
entspricht: B9-RTC-05
CHF 32.90
Auf Lager
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
AuswahlhilfeBuggy MaterialLexan Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF 24.90
Auf Lager
+ −
BD10F Front balance weight L / R 40g
YOK-B10-BWF40A
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF 65.00
Auf Lager
+ −
Front double-joint universal BD11
YOK-B11-010FWA
entspricht: B11-010FW
CHF 64.90
Auf Lager
+ −
Front bulk head for YZ-2T
YOK-Z2-002BTA
entspricht: Z2-002BT
CHF 9.50
Auf Lager
+ −
Fahrzeug Tasche Team Yokomo
YOK-YT-28MB
A new hand-carry bag with the Yokomo logo is now available for transporting your machine to the race track. The bag is large enough to hold not only touring cars and drift cars, but also wide off-road cars. The bag is also equipped with a belt to easily hold the machine for safe...
CHF 64.90
Auf Lager
+ −
Aluminum Gear Differential Case (with 38T pulley)
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF 64.90
Auf Lager
+ −
Aluminum front short A arm set for YD-2 (Red/Bevel
YOK-Y2-R08FSCA
entspricht: Y2-R08FSC
CHF 69.90
Auf Lager
+ −
Alu Front upper A Arm YD-4
YOK-Y4-008FUC
 
CHF 47.90
Auf Lager
+ −
Aluminum main chassis for YZ-2T
YOK-Z2-002TA
entspricht: Z2-002T
CHF 95.00
Auf Lager
+ −
Carbon Graphite Main Chassis
YOK-B9-00219
CHF 95.00
Auf Lager
+ −
Front Double Joint Universal Driveshaft BD9/BD10
YOK-B9-010FWA
entspricht: B9-010FW
CHF 59.90
Auf Lager
+ −
Narrow Graphite Main Chassis Set für YD-2R inline
YOK-Y2-002RXVA
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF 189.90
Auf Lager
+ −
Alu main Chassis (Midship) YZ CAL2 / DTM2S
YOK-Z2-0023
CHF 94.90
Auf Lager
+ −
Yokomo Transmitter Bag V2
YOK-YT-27TB2A
Yokomo has announced the release of new multipurpose bag under the name of Transmitter bag.
CHF 55.90
Auf Lager
+ −
Front HD Double Joint Univ. Shaft
YOK-B7-010FW
 
CHF 62.90
Auf Lager
+ −
3gear idler gear für CA
YOK-Z2-503ICA
 
CHF 6.90
Auf Lager
+ −
Karosserie Toyo S15 Silvia klar
YOK-SD-TY15BB
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 62.90
Auf Lager
+ −
Graphite Rear Shock Tower YD-4
YOK-Y4-018
 
CHF 22.90
Auf Lager
+ −
Front upper arm mount ”S” (Standard) for YZ-2 seri
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF 25.90
Auf Lager
+ −
Main Chassis YZ-2
YOK-Z2-002
 
CHF 89.90
Auf Lager
+ −
Alu Offset Rear Hub Carrier 0 degree Set YZ4/Z2ca
YOK-Z2-415RS
This is intended for the variable set up for upper arm by replacement for several kind of track surface.
CHF 89.90
Auf Lager
+ −
Ceramic Kugellager 10x15x4mm 2stk.
YOK-BB-1510CBA
entspricht: BB-1510CB
CHF 16.90
Auf Lager
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
Auf Lager
+ −
Alu Front Steering Hub Carrier 12.5° YZ-4
YOK-Z4-413125A
 
CHF 59.90
Auf Lager
+ −
Type B, Front suspension arm
YOK-Z2-008F3A
F3 Outer pin spec
CHF 11.00
Auf Lager
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF 59.90
Auf Lager
+ −
Aluminum Rear Hub Carrier Blue für RD2.0/SD3.0
YOK-RD-415ARBL
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
Auf Lager
+ −
Drift competition tire for carpet/P-tile DRC 4stk.
YOK-ZR-DRCA
For Carpet/Polished Tile These HDPE tires have a flatter surface compared to the asphalt variant.
Auswahlhilfe200mm Touring, 190mm Touring MaterialDrift Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road Drift
CHF 11.00
Auf Lager
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF 35.00
Auf Lager
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF 34.90
Auf Lager
+ −
Front Lower Short A Arm YD2 YD4
YOK-Y2-008FSCA
Yokomo will release a new optional parts [Front lower short A arm] for more freedom on counter steering for existing customer who enjoy AWD and RWD drifting with YD-4 & YD-2 series in the end of this month, May 31st.
CHF 64.90
Auf Lager
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform.
CHF 34.90
Auf Lager
+ −
Komplettrad Drift DRC 4stk.
YOK-ZR-DRCW6A
It is a solid type competition resin drift tire DRC. This PE compound is ideal for carpets and P-tile road surfaces, and the tire thickness, tread shape, sidewall shape, etc. have been newly designed to match the latest drift style. It can be attached to a general 1/10 size drift wheel as it is,...
CHF 34.90
Auf Lager
+ −
Lexanschere / Lexan Schere
YOK-YT-CS2A
entspricht: YT-CS2
CHF 15.90
Auf Lager
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF 57.90
Auf Lager
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF 42.90
Auf Lager
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425A
entspricht: Z2-20425
CHF 16.90
Auf Lager
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF 42.90
Auf Lager
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
Auf Lager
+ −
Alu adjustable steering bell crunk set for YD-2
YOK-Y2-202VA
It is a variable aluminum steering bell crank that can be used in common with the YD - 2 series.
CHF 99.90
Auf Lager
+ −
Aluminium Suspension Mount Set für RS1.0/RS2.0
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
Auf Lager
+ −
Alum.Main Chassis for MO3.0
YOK-MO-002-3
CHF 84.90
Auf Lager
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF 49.90
Auf Lager
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF 41.90
Auf Lager
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF 20.50
Auf Lager
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF 159.90
Auf Lager
+ −
Alu Chassis BD12
YOK-B12-002A
CHF 159.90
Auf Lager
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF 21.50
Auf Lager
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF 79.90
Auf Lager
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF 11.50
Auf Lager
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF 79.90
Auf Lager
+ −
Aluminum Adj. Suspension Mount Set Purple RD2.0
YOK-RD-301ASP
CHF 79.90
Auf Lager
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF 16.90
Auf Lager
+ −
Aluminum Adj. Suspension Mount Set Rot für RD2.0
YOK-RD-301ASR
CHF 79.90
Auf Lager
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF 39.90
Auf Lager
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3GA
entspricht: Z2-008F3G
CHF 15.90
Auf Lager
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF 39.90
Auf Lager
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF 39.90
Auf Lager
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF 12.20
Auf Lager
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF 79.00
Auf Lager
+ −
Motor mount
YOK-B7-32L15
 
CHF 38.90
Auf Lager
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF 62.90
Auf Lager
+ −
SLF Big Bore Shock set for DP-YD2 Red
YOK-Y2-SBBSRA
entspricht: Y2-SBBSR
CHF 77.00
Auf Lager
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF 21.90
Auf Lager
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF 25.90
Auf Lager
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF 13.90
Auf Lager
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF 8.90
Auf Lager
+ −
Karosserie Extrem PS13 SILVIA 1:10
YOK-SD-PS13BA
entspricht: SD-PS13B
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 46.90
Auf Lager
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF 18.90
Auf Lager
+ −
Racing Performer DX2 Type-R Brushless Motor 11.5T
YOK-RPM-D2115RBL
The Racing Performer DX series, the most popular brushless motors for drifting, is now available in a new range! The colourful anodised DX2 series is a high-revving Type-R specification available in four colours (blue, purple, red and black) and three different gear ratios from 11.5T to...
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 149.90
Auf Lager
+ −
Aluminum main chassis for BD10
YOK-B10-002AA
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF 124.90
Auf Lager
+ −
Racing Performer DX2 Type-R Brushless Motor 11.5T
YOK-RPM-D2115RB
The Racing Performer DX series, the most popular brushless motors for drifting, is now available in a new range! The colourful anodised DX2 series is a high-revving Type-R specification available in four colours (blue, purple, red and black) and three different gear ratios from 11.5T to...
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 149.90
Auf Lager
+ −
Racing Performer DX2 Type-R Brushless Motor 13.5T
YOK-RPM-D2135RB
The Racing Performer DX series, the most popular brushless motors for drifting, is now available in a new range! The colourful anodised DX2 series is a high-revving Type-R specification available in four colours (blue, purple, red and black) and three different gear ratios from 11.5T to...
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 149.90
Auf Lager
+ −
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF 49.90
Auf Lager
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF 74.90
Auf Lager
+ −
Pandem Nissan Fairlady Z RZ34 1:10
YOK-SD-RZ34B
The new body Pandem Nissan Fairlady RZ34 for drifting is now available! The sharp nose and massive form create a powerful silhoutte and the Pandem Spoiler and aero parts create a massive atmosphere. The one-piece molded polycarbonate body easily creates a powerful body. A two-piece light...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 74.90
Auf Lager
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF 8.50
Auf Lager
+ −
COROLLA Axio apr GT Body Set
YOK-GT-CAXBS
Auswahlhilfe1:12 MaterialLexan Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF 49.90
Auf Lager
+ −
PANDEM 90 Light parts / Wing parts set
YOK-SD-PM90LWA
Light bracket parts and polycarbonate wing for the GR PANDEM 90 bodies are finally here! The fine details are made of high quality polycarbonate. The set comes with the following Headlight, taillight brackets and a 4-split rear wing.
CHF 49.90
Auf Lager
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF 13.90
Auf Lager
+ −
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF 24.90
Auf Lager
+ −
Competition Capacitor (Non-Polarity)
YOK-BL-RCPA
entspricht: BL-RCP
CHF 49.60
Auf Lager
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF 19.90
Auf Lager
+ −
Titanium Screw Set for MO2.0
YOK-RP-116
This set allows the 142 screws used in the Master Off-Road MO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF 144.40
Auf Lager
+ −
Alu C-hub Carrier for RTC (BD8 und BD7)
YOK-B8-RTC-15
The new C-hub carrier is made by high quality aluminum made and designed with new cantilever type for more light weight while having sufficient strength.
CHF 47.90
Auf Lager
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF 32.90
Auf Lager
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 47.90
Auf Lager
+ −
Alum.St.Bellcrank set for RO1.0/SO1.0
YOK-Z2-201SBS
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF 71.80
Auf Lager
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF 89.90
Auf Lager
+ −
Kategorien
Zubehör und Ersatzteile
Antriebs-Set
Dekor-Material
Ersatzteile
Karosserie
Karosserie Zubehör
LKW Zubehör
Motor
Rad und Reifen
Schablonen (Paint Masks)
Tuning
+6Mehr
RC Auto
RC Motorrad
RC Baumaschinen und Traktoren
RC LKW
RC Panzer
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (263)
Passend zu...
    Alle zeigen (90)
Abmessungen
Auswahlhilfe
    Alle zeigen (29)
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (19)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Alle zeigen (67)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags