Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

HSH-YOK-ALUCONV
Alu Conversion Kit für Yokomo SD Aluminium blau, inkl. Kugellager
CHF 69.90
En stock
+
YOK-Y2-002TSA
Team Yokomo's competition drift brand, Teams, is proud to announce the release of the new light weight flex chassis set for the YD-2 series. The lightweight graphite main chassis plate and special lightweight battery holder provide the right amount of rigidity and traction for a more...
CHF 209.00
En stock
+
YOK-Z2-01068A
entspricht: Z2-01068
CHF 34.90
En stock
+
YOK-RD-202A
Aluminum steering bellcrank set for RD2.0. By adding a forward lean angle to the wiper post, it reduces bump changes when a cutting angle is added and shows neutral characteristics. Also, the servo rod mounting length can be adjusted with a spacer, allowing the feeling to be changed according to...
CHF 69.00
En stock
+
YOK-B9-302MA
entspricht: B9-302M
CHF 49.50
En stock
+
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
AuswahlhilfeBuggy MaterialLexan Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF 24.90
En stock
+
YOK-B9-RTC-05A
entspricht: B9-RTC-05
CHF 32.90
En stock
+
YOK-B10-BWF40A
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF 65.00
En stock
+
YOK-Z2-002BTA
entspricht: Z2-002BT
CHF 9.50
En stock
+
YOK-B11-010FWA
entspricht: B11-010FW
CHF 64.90
En stock
+
YOK-YT-28MB
A new hand-carry bag with the Yokomo logo is now available for transporting your machine to the race track. The bag is large enough to hold not only touring cars and drift cars, but also wide off-road cars. The bag is also equipped with a belt to easily hold the machine for safe...
CHF 64.90
En stock
+
YOK-Y2-R08FSCA
entspricht: Y2-R08FSC
CHF 69.90
En stock
+
YOK-MS-503GHA
Used in place of the standard plastic gear diff case, this aluminum diff case increases diff oil heat dissipation and stabilizes operating effectiveness. Especially during the summer season, it can prevent oversteer due to low differential oil viscosity and stabilize lap times. The pulley part is...
CHF 64.90
En stock
+
CHF 47.90
En stock
+
YOK-B9-010FWA
entspricht: B9-010FW
CHF 59.90
En stock
+
YOK-Z2-002TA
entspricht: Z2-002T
CHF 95.00
En stock
+
YOK-YT-27TB2A
Yokomo's new propo bag has been redesigned! The design has been changed to the Racing Factory logo, and it is a propo bag with cushioning to protect your precious radio from shocks when traveling to the RC circuit. The image of the bag is the same as that of the pit bag, and the total...
CHF 55.90
En stock
+
CHF 95.00
En stock
+
YOK-Y2-002RXVA
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF 189.90
En stock
+
YOK-Z2-503ICA
entspricht: Z2-503IC
CHF 6.90
En stock
+
CHF 94.90
En stock
+
CHF 62.90
En stock
+
YOK-SD-TY15BB
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 62.90
En stock
+
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF 25.90
En stock
+
CHF 22.90
En stock
+
YOK-Z2-002
 
CHF 89.90
En stock
+
YOK-Z2-415RS
This is intended for the variable set up for upper arm by replacement for several kind of track surface.
CHF 89.90
En stock
+
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock
+
YOK-BB-1510CBA
entspricht: BB-1510CB
CHF 16.90
En stock
+
CHF 59.90
En stock
+
CHF 59.90
En stock
+
YOK-Z2-008F3A
F3 Outer pin spec
CHF 11.00
En stock
+
YOK-RD-415ARBL
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF 59.90
En stock
+
CHF 35.00
En stock
+
YOK-ZR-DRCA
For Carpet/Polished Tile These HDPE tires have a flatter surface compared to the asphalt variant. By increasing the contact patch these tires let you drift on carpet/polished tile with an increased sense of grip and driving performance
Auswahlhilfe190mm Touring, 200mm Touring MaterialDrift Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road Drift
CHF 11.00
En stock
+
CHF 34.90
En stock
+
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform. The system is a set of shaped brass plate that can be used in various ways according to the situation. It comes as a set of three with...
CHF 34.90
En stock
+
YOK-Y2-008FSCA
Yokomo will release a new optional parts [Front lower short A arm] for more freedom on counter steering for existing customer who enjoy AWD and RWD drifting with YD-4 & YD-2 series in the end of this month, May 31st. Short Suspension Arm will be a kind of highlight at all the option...
CHF 64.90
En stock
+
YOK-ZR-DRCW6A
It is a solid type competition resin drift tire DRC. This PE compound is ideal for carpets and P-tile road surfaces, and the tire thickness, tread shape, sidewall shape, etc. have been newly designed to match the latest drift style. It can be attached to a general 1/10 size drift wheel as it is,...
CHF 34.90
En stock
+
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF 57.90
En stock
+
YOK-YT-CS2A
entspricht: YT-CS2
CHF 15.90
En stock
+
CHF 42.90
En stock
+
YOK-Y4-415SC
 
CHF 42.90
En stock
+
YOK-Z2-20425A
entspricht: Z2-20425
CHF 16.90
En stock
+
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
En stock
+
YOK-RS-301AS
This aluminum suspension mount is commonly used for the RS series. The rear mount is basically designed to have the same width as the standard one, but the rear rear suspension toe angle can be changed by interchanging the two types of bushings. The kit standard (3 degree) bushing is the center...
CHF 84.90
En stock
+
YOK-Y2-202VA
It is a variable aluminum steering bell crank that can be used in common with the YD - 2 series. Corresponding to the wide tread of the front which is the mainstream of recent RWD drift, we set the width of the tie rod pivot part of the center link right and left, and widely set the...
CHF 99.90
En stock
+
CHF 84.90
En stock
+
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (263)
Compatibilité
    Afficher tout (90)
Abmessungen
Auswahlhilfe
    Afficher tout (29)
Material
Prix
CHF
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (19)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (67)
Betriebsspannung
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags