ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Recommandés
48 Par page
Aluminum main chassis for BD10
YOK-B10-002A
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF124.90
En stock
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038
CHF41.90
En stock
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
En stock
+ −
Type B, Front suspension arm
YOK-Z2-008F3
F3 Outer pin spec
CHF11.00
En stock
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
En stock
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
En stock
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5
CHF13.90
En stock
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SAL
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
En stock
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06R
CHF79.90
En stock
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425
CHF16.90
En stock
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
En stock
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
En stock
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWB
MaterialLexan AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF24.90
En stock
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
En stock
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
En stock
+ −
Front bulk head for YZ-2T
YOK-Z2-002BT
CHF9.50
Rupture de stock
Motor mount BD7-2015
YOK-B7-32L15
 
CHF38.90
En stock
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF21.90
En stock
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1
Lexanschere Fluorine processing Scissor 160mm
CHF16.90
En stock
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF13.90
En stock
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF75.90
En stock
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812A
CHF12.20
En stock
+ −
Team Yokomo compact nylon tool bag
YOK-YT-YTB
A tool bag finished with durable nylon fabric and careful sewing. The main storage compartment is double zip type which makes easy to open or close the bag. The back of the lid has a compartment pocket for storing tools and a zipper pocket for storing thin items. The main compartment allows...
CHF37.90
En stock
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF18.90
En stock
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BH
CHF8.50
En stock
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF74.90
En stock
+ −
Gear Differential Unit
YOK-B7-500GS
CHF49.90
En stock
+ −
Adjustable Rear Lower Short H Suspension Arm set
YOK-Y2-008RAS
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July. For the installation Y-2-301D2, Y2-301E2 (Alu rear sus mount) and B8-301BS(Bush) will be essential. But except for YD-2EXII users By...
CHF99.90
En stock
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SF
CHF49.90
En stock
+ −
Rear C Clip Universal BD9/BD10
YOK-B9-010RA
(44.5mm Aluminum bone)
CHF49.90
En stock
+ −
Front upper arm mount "S" (Standard) for YZ-2 seri
YOK-Z2-300FUS
CHF25.90
En stock
+ −
Titanium turn buckle set for YZ-4SF2
YOK-S4-TBS2
CHF49.90
En stock
+ −
Karosserie Corolla Axio apr GT 1:12
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
En stock
+ −
Karosserie Nissan Silvia Speed S14 1:10 klar
YOK-SD-1093B
 
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert HerstellerYokomo
CHF57.50
Rupture de stock
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF24.90
En stock
+ −
TOYOTA 86 Wheel 1:10 2stk. 24mm
YOK-TW-SS86
 
Auswahlhilfe190mm Touring MaterialGummi Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road
CHF9.90
En stock
+ −
Wing Plate for Off-Road Car
YOK-Z2-110
CHF11.50
En stock
+ −
H12 Front Wheel (White)
YOK-B2-821HW
CHF6.40
En stock
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
En stock
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500
 
CHF49.90
En stock
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF46.90
En stock
+ −
Rear short "X30" shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
En stock
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3
CHF21.50
En stock
+ −
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
En stock
+ −
YD-2/BD8 Brass Sus holder B (43.5~46.7mm)
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF27.90
En stock
+ −
Team SAMURAI Project FC3S
YOK-SD-TSFCB
SD-TSFCD Decalsatz   SD-TSFCW Heckflügelsatz SD-TSFCL Light Buckets Ohne LED Einsätze für Beleuchtung. Diese Reflektoren aus silbernem hartem Kunststoff können separat unter der Best.Nr. YOK-SD-TSFCL bestellt werden.
Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert HerstellerYokomo
CHF45.90
Rupture de stock
Alu Separate Suspension Mount (43.5mm)
YOK-B7-3135BS
 
CHF19.90
En stock
+ −
Gear Diff 40T Ring Gear (for S4-503D16) YZ4-SF
YOK-S4-503R16
CHF34.50
En stock
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (239)
Compatibilité
    Afficher tout (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Afficher tout (28)
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Afficher tout (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Afficher tout (11)
Marke
    Afficher tout (65)
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags