ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Recommandés
48 Par page
Lexanschere / Lexan Schere
YOK-YT-CS2A
entspricht: YT-CS2
CHF15.90
En stock  
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF35.00
En stock  
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF34.90
En stock  
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
MaterialLexan AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF24.90
En stock  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform. The system is a set of shaped brass plate that can be used in various ways according to the situation. It comes as a set of three with...
CHF34.90
En stock  
+ −
Karosseriehalter magnetisch hinten
YOK-Y2-016MGRA
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
En stock  
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425A
entspricht: Z2-20425
CHF16.90
En stock  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF42.90
En stock  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF42.90
En stock  
+ −
Karosserie Extrem PS13 SILVIA 1:10
YOK-SD-PS13BA
entspricht: SD-PS13B
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF46.90
En stock  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF8.90
En stock  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF41.90
En stock  
+ −
Aluminum main chassis for BD10
YOK-B10-002AA
Aluminum main chassis for BD10. It is heavier than graphite and can lower its center of gravity. It is especially effective for high grip situations such as carpet surfaces.
CHF124.90
En stock  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF41.90
En stock  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
En stock  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
En stock  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF13.90
En stock  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
En stock  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
En stock  
+ −
Front bulk head for YZ-2T
YOK-Z2-002BTA
entspricht: Z2-002BT
CHF9.50
En stock  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
En stock  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
En stock  
+ −
Front upper arm mount ”S” (Standard) for YZ-2 seri
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF25.90
En stock  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
En stock  
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF39.90
En stock  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF16.90
En stock  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
En stock  
+ −
Motor mount
YOK-B7-32L15
 
CHF38.90
En stock  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF12.20
En stock  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
CHF6.40
En stock  
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF21.90
En stock  
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF8.50
En stock  
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF13.90
En stock  
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2A
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF75.90
En stock  
+ −
Adjustable Rear Lower Short H Suspension Arm set
YOK-Y2-008RASA
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July. For the installation Y-2-301D2, Y2-301E2 (Alu rear sus mount) and B8-301BS(Bush) will be essential. But except for YD-2EXII users By...
CHF99.90
En stock  
+ −
Team Yokomo compact nylon tool bag
YOK-YT-YTBA
A tool bag finished with durable nylon fabric and careful sewing. The main storage compartment is double zip type which makes easy to open or close the bag. The back of the lid has a compartment pocket for storing tools and a zipper pocket for storing thin items. The main compartment allows...
CHF37.90
En stock  
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF18.90
En stock  
+ −
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF49.90
En stock  
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF74.90
En stock  
+ −
Gear Differential Unit
YOK-B7-500GS
CHF49.90
En stock  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout! ¦ The front springs are wound with a high pitch, the short high response spring is suitable for the high traction YD-2 series. Increasing the front...
CHF44.90
En stock  
+ −
COROLLA Axio apr GT Body Set
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
En stock  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
En stock  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
En stock  
+ −
Titanium turn buckle set for YZ-4SF2
YOK-S4-TBS2A
entspricht: S4-TBS2
CHF49.90
En stock  
+ −
PANDEM 90 Light parts / Wing parts set
YOK-SD-PM90LWA
Light bracket parts and polycarbonate wing for the GR PANDEM 90 bodies are finally here! The fine details are made of high quality polycarbonate. The set comes with the following Headlight, taillight brackets and a 4-split rear wing.
CHF49.90
En stock  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
 
CHF49.90
En stock  
+ −
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF24.90
En stock  
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (243)
Compatibilité
    Afficher tout (79)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Afficher tout (28)
Anschluss
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Reifen/Rad-Typ
Verwendung
Massstab
    Afficher tout (18)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Spannung
Fertigungsgrad
Max. Geschwindigkeit
Marke
    Afficher tout (68)
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags