ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
H12 Front Wheel (Yellow) leucht gelb
YOK-B2-821HYA
CHF6.40
Auf Lager
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF59.90
Auf Lager
+ −
13Shock Piston f1.8x2x2.0mmfor SO/MO2.0
YOK-S4-S18213
Piston for F13mm shock. The hole diameter is 1.8mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
Auf Lager
+ −
13Shock Piston f1.7x2x2.0mmfor SO/MO2.0
YOK-S4-S17213
Piston for F13mm shock. The hole diameter is 1.7mm with 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
Auf Lager
+ −
13Shock Piston f1.6x2x2.0mmfor SO/MO2.0
YOK-S4-S16213
Piston for F13mm shock. The hole diameter is 1.6mm and there are 2 holes. The thickness of the piston is 2.0mm. Contains 2 pieces.
CHF7.90
Auf Lager
+ −
O-Ring Set (2set) for SO/MO2.0 (Light Weight)
YOK-S4-S3OS
CHF3.90
Auf Lager
+ −
13 Spring Adjust Nut for SO/MO2.0
YOK-S4-S4AJ13
CHF7.50
Auf Lager
+ −
13 Shock Cap (Plastic) for SO/MO2.0
YOK-S4-S813R
A resin cap for F13mm big bore shocks. Drain screw included. Contains 2 pieces.
CHF8.50
Auf Lager
+ −
13 Shock Plastic Parts for SO/MO2.0
YOK-S4-S913
CHF11.90
Nicht auf Lager
Alum. 13 Shock Cap Ball Hard for SO/MO2.0
YOK-YS-8BH13
Shock cap ball for F13mm big bore shock. The surface is hard coated to make it resistant to abrasion. Contains 4 pieces.
CHF11.90
Nicht auf Lager
Alum. S2 Front Chassis weight for SO2.0
YOK-Z2-002FWA
Aluminum front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is about 7g.
CHF17.50
Nicht auf Lager
Steel S2 Front Chassis weight for SO2.0
YOK-Z2-002FWS
Steel front chassis weight for SO2.0. Installed under the front side servo of the chassis and adjusted the weight and rigidity. Weight is approximately 20g.
CHF17.50
Auf Lager
+ −
"X30" 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager
+ −
"X30" 13 shock set (rear/short)
YOK-S4-S1M13
This is a F13mm big bore shock set. The M size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager
+ −
"X30" 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager
+ −
RP Ultra Shock Oil #42.5 (Blue)
YOK-RP-113425
CHF8.90
Auf Lager
+ −
RP Ultra Shock Oil #37.5 (Purple)
YOK-RP-113375
CHF8.90
Auf Lager
+ −
RP Ultra Shock Oil #32.5 (Brown)
YOK-RP-113325
CHF8.90
Auf Lager
+ −
RP Ultra Shock Oil #27.5 (Light Yellow)
YOK-RP-113275
CHF8.90
Auf Lager
+ −
Alu Brush Motor Adapter für RS1.0
YOK-RS-302AD
CHF8.90
Auf Lager
+ −
Graphite shock tower für RS1.0 hinten
YOK-RS-018G
CHF22.90
Auf Lager
+ −
Graphite shock tower für RS1.0 vorne
YOK-RS-017G
CHF14.90
Auf Lager
+ −
Gokuraku off-road wing (straight)
YOK-ZS-GWBS
CHF14.90
Auf Lager
+ −
M2 x 3mm flat head socket screw (4 pieces)
YOK-ZC-F23
CHF2.90
Nicht auf Lager
Steering Block L/R (Graph) for SO2.0(2pcs.)
YOK-Z2-415S2G
CHF11.90
Auf Lager
+ −
Steering Block L/R (Hard) for SO2.0
YOK-Z2-415S2H
CHF6.90
Auf Lager
+ −
Graphite Steering Block Plate DOT1for SO2.0
YOK-Z2-415S21
CHF11.50
Auf Lager
+ −
Wide front wing for SO series
YOK-Z2-107FW2
CHF8.90
Auf Lager
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
Auf Lager
+ −
Off-road body for SO series (standard)
YOK-Z2-101S2
CHF26.90
Auf Lager
+ −
Alum Adjustable Front Axle for SO2.0
YOK-Z2-010AFA
CHF16.90
Auf Lager
+ −
Steel S2 Chassis weight (26g) for SO2.0
YOK-Z2-002WS
CHF15.90
Auf Lager
+ −
Alum. S2 Chassis weight (9g) for SO2.0
YOK-Z2-002WA
CHF16.90
Auf Lager
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF89.90
Auf Lager
+ −
Aluminum clamp type servo horn for YD-2ZX
YOK-Y2-204Z26
Aluminum servo horn for YD-2ZX. It has a shape that matches the mounting method where the servo is placed directly on the main chassis, and is a type that is fixed with a clamp through an adapter that matches the servos of each company.
CHF21.00
Auf Lager
+ −
Aluminum motor mount for BD10F
YOK-B10-302MF
Aluminum motor mount for BD10F. Backlash can be adjusted by sliding the joint with the center mount.
CHF22.90
Auf Lager
+ −
Multi Stand Team Yokomo
YOK-YT-MTS
Dieser Mehrfachständer nutzt den Platz im Pit effektiv und kann für die Lagerung von Maschinen, die Installation von Ladegeräten usw. verwendet werden. Dieser einfach zusammengebaute Ständer aus Harz kann beim Transport kompakt verstaut werden und wird schnell aufgebaut, wenn er im Pit...
CHF39.90
Auf Lager
+ −
Stabidraht hinten 1mm BD11/BD12
YOK-B11-412R0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager
+ −
Stabidraht hinten 0.9mm BD11/BD12
YOK-B11-412R09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager
+ −
Front Stabidraht 1.0mm BD11/BD12
YOK-B11-412F0A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager
+ −
Front Stabi Draht 0.9mm BD11/BD12
YOK-B11-412F09A
Sway bar for BD12/11 series touring car chassis. With 0.9mm and 1.0mm wire diameter settings, which are thinner than the previous lineup, these bars are mainly effective when driving on outdoor asphalt, using roll to increase grip. Please use as setting parts.
CHF8.90
Auf Lager
+ −
Chassis Schutzfolie 200x390mm
YOK-ZC-CPS
Protective sheet that is attached to the back of the chassis to protect the chassis from road surface interference.The slightly thicker material and stronger adhesive surface ensure a firm bond. The price is reasonable for periodic replacement. It can be used for speed category,...
CHF3.90
Auf Lager
+ −
Lipo Bag Team Yokomo
YOK-YB-LSBB
Battery bag for charging and storing Li-po batteries. The flame-retardant material prevents the spread of fire in the unlikely event that the battery catches fire. It has a safe large capacity and can hold 6 short batteries, making it convenient for storage and transportation. Internal...
CHF23.90
Nicht auf Lager
Yokomo Pit Bag IV
YOK-YT-24BK4
Hand-held pit bag convenient for storing machines and peripheral equipment, with a large capacity to hold a 1/10-size drift car with the body attached, and a two-tiered inner box. Outer dimensions: about 26 x 31 x 52 cm Inner box dimensions: about 246 x 146 x 482 mm
CHF69.90
Auf Lager
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF44.90
Auf Lager
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
Auf Lager
+ −
Belt tension adjustment cam for BD10/9 (2 pieces m
YOK-B10-BTCBA
CHF19.90
Auf Lager
+ −
RC MAKER Pro Aufkleberbogen 1:10 Tourenwagen red
RCM-PDS10-RED
RC MAKER Pro Aufkleberbogen 1:10 Tourenwagen AUSSEN RC Maker Produktbeschreibung: Eine schön aussehende Karosserie war bisher teuer und zeitaufwendig - bis jetzt! Lackieren Sie Ihre Karosserie einfach wie gewohnt von innen mit Ihrer gewünschten Grundfarbe. Bringen Sie unser Pro Decal Set...
CHF24.90
Nicht auf Lager
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (239)
Passend zu...
    Alle zeigen (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Alle zeigen (11)
Marke
    Alle zeigen (65)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags