Deutsch (CH)
ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Ordnen nach:
Empfohlen
Zeigen:
96
Alu Vari Kingpin Angle Steering block Set SDR01LTS
YOK-Y2-415SALL
CHF 99.00
Auf Lager  
+ −
Graphite Main Chassis MS1.0
YOK-MS-002
CHF 99.00
Auf Lager  
+ −
Gokuraku Offroad Wing (Narrow size)
YOK-ZS-GWBNA
entspricht: ZS-GWBN
CHF 9.90
Auf Lager  
+ −
3gear Box Set für CA (Carpet Astroturf)
YOK-Z2-302C3
 
CHF 32.90
Auf Lager  
+ −
Rear Anti Roll Bar "hard" set YZ-2 new arm compat.
YOK-Z2-412RH2
CHF 32.90
Auf Lager  
+ −
Front shock shaft for YZ-2 V3 Titanium coat
YOK-Z2-S2STA
entspricht: Z2-S2ST
CHF 13.90
Auf Lager  
+ −
Aluminum frame 30mm cooling fan (Red)
YOK-D-CFRA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF 32.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier (3mm Pin) CAL3/DTM3
YOK-Z2-415RS2A
entspricht: Z2-415RS2
CHF 97.90
Auf Lager  
+ −
5mm spacer shimm (0.05mm·0.1mm·0.2mm)
YOK-ZC-S50SA
entspricht: ZC-S50S
CHF 6.90
Auf Lager  
+ −
Universal shaft 66.5mm bone
YOK-Z2-010-65
 
CHF 32.50
Auf Lager  
+ −
30mm Fan Shroud SO3.0
YOK-SO-FSS30
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF 13.90
Auf Lager  
+ −
Body Mount Set BD9/BD10
YOK-B9-016A
entspricht: B9-016
CHF 11.90
Auf Lager  
+ −
H12 Front Wheel (White)
YOK-B2-821HWA
entspricht: B2-821HW
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
Auf Lager  
+ −
Front One-Way Assy (for Right Side Belt/Red)
YOK-BR-640W
 
CHF 47.90
Auf Lager  
+ −
Karosserie GReedy R35 Spec D ohne Decals 1:10
YOK-SD-GR35BA
entspricht: SD-GR35B
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 54.90
Nicht auf Lager
Full counter solid axle set (Rear×2.0/Blue)
YOK-IB-FCD20
 
CHF 47.90
Auf Lager  
+ −
B-MAX4III Alu Steering Hub Carrier (15 degrees)
YOK-B4-413A15
 
CHF 47.90
Auf Lager  
+ −
Front & Undertray diffuser set for YD-2 /4 series
YOK-Y2-001BDA
Greatly improve the front grip and turning performance of the chassis when entering a corner or
CHF 19.90
Auf Lager  
+ −
MIP Pucks Aluminum diff ring hub for YZ-2 Stock ve
YOK-Z2-18842
CHF 47.90
Auf Lager  
+ −
Lexus RC GT3 Clear Body for Touring Car
YOK-SP-LFGT3B
This real scale body fits just right for 190mm wide touring cars, and is a scale-down version of the LEXUS RCF GT3, complete with wing and decals,all officially approved by Toyota. The massive form and large rear wing provide a highly stable driving feel. It is also compatible with the...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road, On-Road Drift Lackierungunlackiert
CHF 47.90
Auf Lager  
+ −
Yokomo Racing Performer Ultra Shock Oil 30wt
YOK-RP-085300A
Yokomo Racing Performer Ultra Shock Oil 30wt
CHF 10.80
Auf Lager  
+ −
Hybrid Shock Tower for RD/SD Series
YOK-Y2-017AGBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 47.90
Auf Lager  
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF 31.90
Auf Lager  
+ −
Rear motor conversion kit for YD-2 series
YOK-Y2-RMCA
Introducing the ultimate option for increasing rear traction and speed!
CHF 47.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF 23.90
Auf Lager  
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF 95.00
Auf Lager  
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF 94.50
Auf Lager  
+ −
Graphite front shock tower for YZ-2DTM3/CAL3
YOK-Z2-017-3A
3mm Lowered
CHF 15.90
Auf Lager  
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF 94.10
Auf Lager  
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF 92.90
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3A
entspricht: Z2-413H3
CHF 11.90
Auf Lager  
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF 18.50
Auf Lager  
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF 92.50
Auf Lager  
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF 45.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF 45.90
Auf Lager  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF 24.90
Auf Lager  
+ −
Aluminium Front Shock Tower (Blue) RD/SD Series
YOK-Y2-017AFEBL
Newly released are the Hybrid Front Shock Tower (Blue), an optional part for the RD/SD series, and the standard aluminum shock tower for the SD3.0 Blue version. Both are designed for the same series and can be bolted on to the RD2.0 chassis and other chassis.
CHF 45.90
Auf Lager  
+ −
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
Auf Lager  
+ −
HD f5.5mm Rod end ball (Screw 6mm long/4pcs) for Y
YOK-Z2-206-6A
entspricht: Z2-206-6
CHF 6.90
Auf Lager  
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
Auf Lager  
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF 22.90
Auf Lager  
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF 14.00
Auf Lager  
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF 22.50
Auf Lager  
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF 22.50
Auf Lager  
+ −
Front“X30”shock set
YOK-S4-S1SA
entspricht: S4-S1S
CHF 69.90
Auf Lager  
+ −
Sparen Sie 50%
Sparen Sie 50%
BL-EP6 Brushless speed controller (programmer incl
YOK-BL-EP6A
It is a brushless speed controller that comes with a programmer and realizes a reasonable price while supporting each category of on, off, and drift. In addition to Yokomo's sensor-type brushless motors, it is also possible to drive general-purpose sensorless motors. Of course, it is recommended...
CHF 45.00 CHF 89.90 -50%
Auf Lager  
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF 89.90
Auf Lager  
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF 89.90
Auf Lager  
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF 29.90
Auf Lager  
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF 89.90
Auf Lager  
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF 13.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
Auf Lager  
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
Auf Lager  
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF 25.90
Nicht auf Lager
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF 44.90
Auf Lager  
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF 6.90
Auf Lager  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
Auf Lager  
+ −
Shock Body
YOK-B9-S4S
CHF 29.90
Auf Lager  
+ −
Graphite front shock tower(Gull type)
YOK-Z2-017GA
 
CHF 16.50
Auf Lager  
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
Auf Lager  
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF 29.90
Auf Lager  
+ −
Aluminum top shaft for YZ-2DTM3/CAL3
YOK-Z2-303TA3A
For Z2-670S
CHF 17.90
Auf Lager  
+ −
Aluminum Heat Sink Motor Plate RS2.0
YOK-RS-302HM
This is an optional part for RS2.0, aluminum motor plate. It is shaped like a heat sink and improves the cooling effect of the motor. It suppresses heat leakage of the motor during driving and improves power efficiency. Effective when the temperature rises or when running outdoors during the day.
CHF 29.90
Auf Lager  
+ −
Front Wheel (White)
YOK-B4-821WA
entspricht: B4-821W
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 6.40
Auf Lager  
+ −
Slipper Pad
YOK-B2-670CA
entspricht: B2-670C
CHF 8.90
Auf Lager  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF 17.90
Auf Lager  
+ −
LCG short Li-po enabled Graphite Battery Holder
YOK-B10-118G1A
entspricht: B10-118G1
CHF 87.90
Auf Lager  
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF 26.90
Auf Lager  
+ −
LED Set für BN Sports Toyota JZX100 Mark2
YOK-SD-JZXBNL
This LED set is designed for the BN Sport Mark II. The set includes 6 each of white/red/yellow bullet-type LEDs for headlights, tail lights, and position/wind indicators, and comes with a wiring terminal, extension cable, and connector cable. By drilling holes with a reamer, etc. in the light...
CHF 43.90
Auf Lager  
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF 21.90
Auf Lager  
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF 13.90
Auf Lager  
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF 21.90
Auf Lager  
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF 21.90
Auf Lager  
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF 7.90
Auf Lager  
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF 21.90
Auf Lager  
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF 17.50
Auf Lager  
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF 12.50
Auf Lager  
+ −
High Grade Ball Differential Grease
YOK-CS-HDLA
 
CHF 11.50
Auf Lager  
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF 28.90
Auf Lager  
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF 5.90
Auf Lager  
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF 28.90
Auf Lager  
+ −
Aluminum Servo Mount SO3.0
YOK-SO-203
CHF 28.90
Auf Lager  
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF 12.90
Auf Lager  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF 42.90
Auf Lager  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF 42.90
Auf Lager  
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF 21.50
Auf Lager  
+ −
Rear ESC mount for YD-2 series (Purple)
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
Auf Lager  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF 42.90
Auf Lager  
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2A
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF 75.90
Nicht auf Lager
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF 84.90
Auf Lager  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF 84.90
Auf Lager  
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF 6.50
Auf Lager  
+ −
Alum.Main Chassis for MO3.0
YOK-MO-002-3
CHF 84.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF 16.90
Auf Lager  
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF 9.90
Auf Lager  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF 41.90
Auf Lager  
+ −
Kategorien
Zubehör und Ersatzteile
Antriebs-Set
Dekor-Material
Ersatzteile
Karosserie
Karosserie Zubehör
LKW Zubehör
Motor
Rad und Reifen
Schablonen (Paint Masks)
Tuning
+6Mehr
RC Auto
RC Motorrad
RC Baumaschinen und Traktoren
RC LKW
RC Panzer
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (255)
Passend zu...
    Alle zeigen (90)
Abmessungen
Auswahlhilfe
    Alle zeigen (29)
Material
Preis
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Alle zeigen (67)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags