ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
RC MAKER Kohlefaser Tweak Stangen Set für Yokomo B
RCM-BD11-TS
RC MAKER Kohlefaser Tweak Stangen Set für Yokomo BD11 Da das neue Design des BD11 vorne keine konventionellen Dämpferbrücke hat, verwendet der Tweak Stick Verlängerungsplatten, die gleichmäßigen Druck auf die Bulkheads links und rechts, vorne und hinten ausüben. Der Tweak-Stick hilft...
CHF49.90
Auf Lager
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF59.90
Auf Lager
+ −
Graphite rear stiffener plate für BD11/BD12
YOK-B12-003RSP
CHF21.00
Auf Lager
+ −
Graphite rear upper deck 1.5mm für BD12
YOK-B12-003RS
CHF23.90
Auf Lager
+ −
Graphite front upper dekc BD12 1.5mm
YOK-B12-003FS
CHF24.90
Auf Lager
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
Auf Lager
+ −
AXON TCS 90T spur gear (hard)
YOK-SG-A6490
CHF7.50
Auf Lager
+ −
Shock cap/shock end for BD12
YOK-B12-S6
CHF7.50
Auf Lager
+ −
Shock shaft for BD12
YOK-B12-S5S
CHF7.50
Auf Lager
+ −
Aluminum shock cylinder for BD12
YOK-B12-S4S
CHF24.90
Auf Lager
+ −
Aluminum upper shock cap nut for BD12
YOK-B12-S4C1
CHF9.70
Auf Lager
+ −
Aluminum shock adjust nut/O ring for BD12
YOK-B12-S4AJ
CHF10.50
Auf Lager
+ −
Aluminum spring cup for BD12 (bearing specificatio
YOK-B12-S3S
CHF10.50
Auf Lager
+ −
Shock shaft guide for BD12
YOK-B12-S2B
CHF13.50
Auf Lager
+ −
Graphite body stiffener plate for BD12
YOK-B12-413SP
CHF16.90
Auf Lager
+ −
Graphite molded front steering hub carrier BD12
YOK-B12-413G
CHF17.90
Auf Lager
+ −
Aluminum motor mount for BD12
YOK-B12-302M
CHF76.90
Auf Lager
+ −
Brass center stiffener for BD12
YOK-B12-302CSB
CHF35.90
Auf Lager
+ −
Graphite center stiffener for BD12
YOK-B12-302CS
CHF19.90
Auf Lager
+ −
Graphite rear shock tower for BD12
YOK-B12-018
CHF26.90
Auf Lager
+ −
Graphite front shock tower BD12
YOK-B12-017
CHF27.90
Auf Lager
+ −
Graphite rear upper deck BD12
YOK-B12-003R
CHF24.90
Auf Lager
+ −
Graphite front upper deck BD12
YOK-B12-003F
CHF24.90
Auf Lager
+ −
Chassis Platte BD12 Carbon
YOK-B12-002
CHF109.90
Auf Lager
+ −
Titanium Lower Shock Mount for BD11
YOK-B11-S9T
CHF12.90
Auf Lager
+ −
F/R body mount for BD9/10/11 (hard)
YOK-B11-016H
CHF9.90
Auf Lager
+ −
Drift LTS Rear Spring 1.0×48mm×10.0turns
YOK-D-188
CHF11.90
Auf Lager
+ −
Drift LTS Front Spring 1.0×48mm×9.0turns
YOK-D-187
CHF11.90
Auf Lager
+ −
Drift LTS Front Spring 0.9x45x8.5turns
YOK-D-186
CHF11.50
Auf Lager
+ −
Alu hight mount battery post (F)
YOK-Y2-118FL
CHF16.90
Auf Lager
+ −
Graphite high mount battery plate
YOK-Y2-118PL
CHF34.90
Auf Lager
+ −
Alu high mount Battery Post (R)
YOK-Y2-118RL
CHF23.90
Auf Lager
+ −
Alu Vari Kingpin Angle Steering block Set SDR01LTS
YOK-Y2-415SALL
CHF99.00
Auf Lager
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF39.90
Auf Lager
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF45.90
Auf Lager
+ −
Graphite upper deck for BD10F
YOK-B10-003F
CHF29.90
Auf Lager
+ −
Graphite front body mount stay for MD1.0
YOK-MD-016MG
CHF34.90
Auf Lager
+ −
BD-919/BD10/BD10LC AXON super hub axle pin/"O" rin
YOK-B10-WHAS2A
CHF4.50
Auf Lager
+ −
YOKOMO Parts Case 255X190X40mm
YOK-YC-15
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF21.50
Auf Lager
+ −
YOKOMO Parts Case 205X145X40mm
YOK-YC-14
A new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF13.90
Auf Lager
+ −
YOKOMO Parts Case 86X103X34mm
YOK-YC-13
new lineup of parts cases with the Yokomo logo has been added to the series. The three new cases are suitable for storing relatively small parts, and feature a large number of movable dividers that can be positioned in a variety of ways. The body is made of polypropylene, which is...
CHF8.90
Auf Lager
+ −
Aluminum turnbuckle set for MD1.0
YOK-MD-TBS
This set converts the turnbuckles used in the MD series upper arms and tie rods to aluminum. 20mm/27mm/33mm turnbuckles are included, to reduce weight and improve suspension response.
CHF21.50
Auf Lager
+ −
HD motor mount for SO1.0/YZ-2
YOK-Z2-304THD
This aluminum motor mount can be used with SO1.0 or YZ-2 series. It is thicker than the kit's standard motor mount and is designed for heavy-duty use, so it is less likely to bend even in a severe crash.
CHF29.90
Auf Lager
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF21.90
Auf Lager
+ −
USB Program adaptor SP-02D/03D servo
YOK-SP-USBP
This is a program adapter to easily rewrite the performance of programmable servos for drifting such as SP-02D/03D, etc. Save the application on your PC, start it up, and connect it to the PC's Plug the adapter into the PC's USB connector and connect the servo connector. Power, torque,...
CHF33.90
Auf Lager
+ −
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF119.90
Auf Lager
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
Auf Lager
+ −
Rear Belt Tensioner BD11
YOK-B11-RBTS
Rear belt tensioner set for BD11. It is an effective part especially when a high-power motor is installed, and it is possible to suppress tooth jumping of the rear belt, improve drive efficiency, and make the belt itself last longer. European team drivers who participate in the ETS always wear...
CHF16.90
Auf Lager
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (239)
Passend zu...
    Alle zeigen (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
    Alle zeigen (11)
Marke
    Alle zeigen (65)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags