ERSATZTEIL-FINDER

Zubehör und Ersatzteile

In unserem riesigen Ersatzteil-Sortiment finden Sie garantiert das richtige Ersatzteil für Ihr RC-Fahrzeug.
Nach neueste Artikel sortieren
48 Pro Seite
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
Auf Lager
+ −
Aluminum Main Chassis U.S. Version BD11
YOK-B11-002AU
BD11US specification aluminum main chassis. By not removing meat, it increases rigidity, promotes a low center of gravity, and is suitable for high-grip road surfaces.
CHF124.90
Auf Lager
+ −
Side plate/battery post/antenna mount for YZ-4SF2
YOK-S4-002SPG
These graphite-mixed resin molded side plates can increase the rigidity of the YZ-4SF2 chassis. It is especially effective when driving on high grip surfaces, and improves stability when entering a corner, enabling cornering with good steering response. It is effective not only on...
CHF19.50
Auf Lager
+ −
Rear Upper Mount/Roll Bar Holder/Gear Box
YOK-Z2-300RG
This is a set of resin parts around the rear for YZ-2CAL3.1/DTM3.1/Rear Upper Mount, Roll Bar Holder, and Gear Box Support. Graphite-mixed resin is used to increase rigidity, which is effective in gaining rear stability when turning and improving traction when accelerating.
CHF14.50
Auf Lager
+ −
YZ-2CAL3.1/DTM3.1 Side plate (graphite molding)
YOK-Z2-002SG
Side plate for YZ-2CAL3.1/DTM3.1. Graphite-mixed resin is used to increase rigidity and improve steering response, especially on high-grip surfaces. In particular, pitching rigidity is increased, enabling the driver to gain a sense of stability from corner entry to clipping
CHF14.90
Auf Lager
+ −
4 gear transmission conversion MD1.0
YOK-MD-CON4
The standard MD1.0 transmission has 3 gears and positive torque, but by adding a counter gear and reconfiguring it, this conversion set can be used with 4 gears and anti-torque specifications. Compared to a 3-gear transmission, the additional gear increases drive loss, but the...
CHF37.90
Auf Lager
+ −
Inline Battery holder conversion für MD1.0
YOK-MD-CONV
This is a battery holder conversion to change the battery mounting of MD1.0 to inline mounting. When the car has a certain degree of grip, mounting the battery inline (in the front-back direction of the chassis) suppresses chassis roll, enabling sharper movement when transitioning to an...
CHF43.90
Auf Lager
+ −
Rear short shock shaft for YZ-2DTM3/CAL3
YOK-S4-S2MA
CHF9.50
Auf Lager
+ −
High traction rear hub carrier weight
YOK-Y2-415RWA
A steel weight that can be attached directly to the rear hub carrier of the YD-2 series to increase rear traction. It is possible to effectively increase the rear grip by increasing the unsprung weight that directly applies the load to the tire without passing through a damper. The weight is...
CHF32.90
Auf Lager
+ −
Brass rear hub carrier for YD-2 series
YOK-Y2-415RBA
It is a rear hub carrier that can be used in common with the YD-2 series. Made from heavy brass, it greatly increases the unsprung weight that directly loads the tire, increasing rear traction.
CHF74.90
Auf Lager
+ −
Aluminum front lower short A arm set (Purple/Bevel
YOK-Y2-P08FSCA
CHF67.90
Auf Lager
+ −
Aluminum Front Upper I Arm (Red) for YD-2
YOK-Y2-R08FUIA
An aluminum I arm used for the front upper arm of the YD-2 series. Red anodized color that matches the red version of the YD-2 series. By moving the spacer, the caster angle can be adjusted in the range of 7mm back and forth. Although it is made of highly rigid aluminum, it has been made as...
CHF49.90
Auf Lager
+ −
Aluminum Front Upper I Arm (Purple) for YD-2
YOK-Y2-P08FUIA
An aluminum I arm used for the front upper arm of the YD-2 series. Red anodized color that matches the red version of the YD-2 series. By moving the spacer, the caster angle can be adjusted in the range of 7mm back and forth. Although it is made of highly rigid aluminum, it has been made as...
CHF49.90
Auf Lager
+ −
Aluminum Front Upper I Arm for YD-2
YOK-Y2-008FUIA
An aluminum I arm used for the front upper arm of the YD-2 series. By moving the spacer, the caster angle can be adjusted in the range of 7mm back and forth. Although it is made of highly rigid aluminum, it has been made as lightweight as possible by making it an I-arm shape. When changing...
CHF49.90
Auf Lager
+ −
Rear short "X30" shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
Auf Lager
+ −
f12mm "O" Ring of Adjust Nut for LF Pro shock
YOK-YS-7AB
CHF3.90
Auf Lager
+ −
Lightweight battery holder/mount for YD-2
YOK-Y2-118LA
It is a battery holder set for the YD-2 series, and comes with two types, one for standard size and one for short battery. The short size is also compatible with low height types, and is significantly lighter than before.
CHF13.90
Auf Lager
+ −
Drift Car Rückspiegel/Scheibenwischer Set 1:10
YOK-SD-ACD2A
CHF6.90
Nicht auf Lager
Rear hub carrier link mount für S4-415RS
YOK-S4-415RLA
CHF14.90
Auf Lager
+ −
DX1R series Brushless motor (10.5T) purple
YOK-RPM-DX105RP
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
Nicht auf Lager
DX1R series Brushless motor (13.5T) purple
YOK-RPM-DX135RP
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
Auf Lager
+ −
DX1R series Brushless motor (10.5T) rot
YOK-RPM-DX105RR
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
Auf Lager
+ −
DX1R series Brushless motor (13.5T) rot
YOK-RPM-DX135RR
The DX1 Type-R motor, one of the most popular brushless motors for drifting, is now available in a new color anodized version! The two color variations are of course red anodized and purple anodized, which best match the YD-2 series, and of course, match the chassis perfectly. This is a...
CHF119.90
Auf Lager
+ −
Progressive Federn BD11 2.10 bis 2.40 20mm
YOK-B10-SSP21
CHF12.90
Auf Lager
+ −
Progressive Federn BD11 1.90-2.20 20mm
YOK-B10-SSP19
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
Auf Lager
+ −
Progressive Federn 1.80 bis 2.10 20mm
YOK-B10-SSP18
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
Auf Lager
+ −
High Grade O-Ring (oil resistant blue, 8stk.)
YOK-YS-7HG2
CHF8.90
Auf Lager
+ −
Big Bore Stossdämpfer Diaphragms 4stk. silicon
YOK-YS-8DS
CHF4.90
Auf Lager
+ −
Receiver Capacitor (non-polarized)
YOK-BL-RRCP
This capacitor is connected to the BEC channel of the receiver to reduce noise and stabilize the servo current. When a large load is placed on the servo during driving, the capacitor can momentarily supplement power to stabilize the servo's operation. Since it is non-polarized, it...
CHF17.90
Auf Lager
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF29.90
Auf Lager
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF89.90
Auf Lager
+ −
Aluminum center mount for BD10F
YOK-B10-302CM
CHF84.90
Auf Lager
+ −
Body Mount Patch 6x0.5mm
YOK-ZR-BMP6B
CHF7.50
Auf Lager
+ −
Rear short shock shaft (titanium coat) for YZ-2DTM
YOK-S4-S2MT
A shock shaft that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and enhance the shock absorption effect. Since the shaft surface is coated with titanium,...
CHF23.50
Auf Lager
+ −
Rear short "X30" shock body for YZ-2DTM3 / CAL3
YOK-S4-S4M
A shock body that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. 1 bottle included.
CHF14.50
Nicht auf Lager
BD10F Drive Belt 103T
YOK-BD-309L
CHF13.90
Auf Lager
+ −
Stabiliser wire BD11 hinten 1.4mm
YOK-B11-412R4A
CHF9.90
Auf Lager
+ −
Stabiliser Wire BD11 front 1.4mm
YOK-B11-412F4A
F1.4mm is added as a variation of the sway bar wire for BD11. This wire is one rank stiffer than the previous lineup and is mainly used to limit roll on high-grip surfaces. Compared to BD10, BD11 has a lower lever ratio and is more compatible with softer springs. However, on...
CHF9.90
Auf Lager
+ −
Graphite steering block plate for BD10 / 9 RTC
YOK-B10-RTC-5
CHF10.90
Auf Lager
+ −
Graphite molded S3/LD rear sus-arm YZ2-DTM/CAL
YOK-Z2-008R3G
For YZ-2 DTM/CAL 3/3.1
CHF16.90
Auf Lager
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3G
CHF15.90
Auf Lager
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5G
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF15.90
Auf Lager
+ −
Graphite molded Front sus-arm for YZ-4SF2
YOK-S4-008F2G
CHF15.90
Auf Lager
+ −
Optional parts set for YD-2 series Upgrade 4
YOK-Y2-OP4
By increasing the rigidity of the shock tower, the suspension will move even better. Considering the lightweight finish on the front side, we chose a graphite hybrid shock tower and a lightweight integrated bulkhead.
CHF144.90
Auf Lager
+ −
Optional parts set for YD-2 series Upgrade 3
YOK-Y2-OP3
CHF189.90
Auf Lager
+ −
Optional parts set for YD-2 series Upgrade 2
YOK-Y2-OP2
Axles and bearings that lightly finish the rotation of the tire. It is possible to prevent spin by improving the running of the front. In addition, the variable kingpin angle steering block provides optimal wheel alignment for drift driving.
CHF109.90
Auf Lager
+ −
Optional parts set for YD-2 series Upgrade 1
YOK-Y2-OP1
In addition to the height-adjustable aluminum oil shock that is the basis of suspension tuning, the aluminum suspension arm set that finishes the front area with light weight and high precision makes it possible to finish with a high sense of stability.
CHF199.90
Auf Lager
+ −
BD11 decal sheet
YOK-ZC-BD11-1
A decal sheet with the BD11 and Yokomo logos. It's perfect for dressing up your machine, and sticking it on your body will increase your attachment to the machine.
CHF8.90
Auf Lager
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (240)
Passend zu...
    Alle zeigen (67)
Akku-Stecker
Akku-Technologie
Akkutyp
Auswahlhilfe
    Alle zeigen (28)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF329.9
Reifen/Rad-Typ
Verwendung
Massstab
    Alle zeigen (18)
Motor / Antrieb
Einsatz
Lackierung
Spannung
Marke
    Alle zeigen (65)
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags