Français (CH)
ERSATZTEIL-FINDER

Accessoires et pièces détachées

Vous êtes assuré de trouver la bonne pièce de rechange pour votre véhicule RC dans notre vaste gamme de pièces de rechange.

Trier par:
Recommandé
Montrer:
48
Body Mount Set BD9/BD10
YOK-B9-016A
entspricht: B9-016
CHF 11.90
En stock
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF 31.90
En stock
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF 23.90
En stock
+ −
Aluminum bulk head mount for YZ-2 series
YOK-Z2-018BMAA
entspricht: Z2-018BMA
CHF 56.50
En stock
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF 95.00
En stock
+ −
Gokuraku Offroad Wing (Narrow size)
YOK-ZS-GWBNA
entspricht: ZS-GWBN
CHF 9.90
En stock
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF 94.50
En stock
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF 94.10
En stock
+ −
5mm spacer shimm (0.05mm·0.1mm·0.2mm)
YOK-ZC-S50SA
entspricht: ZC-S50S
CHF 6.90
En stock
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF 94.10
En stock
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF 92.90
En stock
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF 25.90
En stock
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF 18.50
En stock
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF 92.50
En stock
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF 45.90
En stock
+ −
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF 45.90
En stock
+ −
Karosserie GReedy R35 Spec D ohne Decals 1:10
YOK-SD-GR35BA
entspricht: SD-GR35B
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 54.90
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF 22.90
En stock
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF 22.90
En stock
+ −
Front & Undertray diffuser set for YD-2 /4 series
YOK-Y2-001BDA
Greatly improve the front grip and turning performance of the chassis when entering a corner or snapping transitions. The response of the car to the steering operation becomes more of a direct feeling, and the control of the drift can be carried out as expected.
CHF 19.90
En stock
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF 22.90
En stock
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF 22.50
En stock
+ −
Yokomo Racing Performer Ultra Shock Oil 30wt
YOK-RP-085300A
Yokomo Racing Performer Ultra Shock Oil 30wt
CHF 10.80
En stock
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF 22.50
En stock
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF 89.90
En stock
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF 89.90
En stock
+ −
Rear motor conversion kit for YD-2 series
YOK-Y2-RMCA
Introducing the ultimate option for increasing rear traction and speed! That is already known, Rear motor conversion kit which enable to mount on both YD-2E series and YD-2S series. (S series require to add some other parts) 1)Improving the rotational effect of the motor by reducing the...
CHF 47.90
En stock
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF 89.90
En stock
+ −
Graphite front shock tower for YZ-2DTM3/CAL3
YOK-Z2-017-3A
3mm Lowered
CHF 15.90
En stock
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF 89.90
En stock
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3A
entspricht: Z2-413H3
CHF 11.90
En stock
+ −
Aluminum SLF Big Bore Shock Set Blue
YOK-Y2-SBBSBL
Super low friction aluminum big bore shock set in blue anodized aluminum color. The cylinder diameter is wider than conventional shocks and the shock length is newly designed for drifting. Large capacity and increased stability.
CHF 89.90
En stock
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF 44.90
En stock
+ −
HD f5.5mm Rod end ball (Screw 6mm long/4pcs) for Y
YOK-Z2-206-6A
entspricht: Z2-206-6
CHF 6.90
En stock
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF 44.90
En stock
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF 44.90
En stock
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF 44.90
En stock
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF 24.90
En stock
+ −
Shock Body
YOK-B9-S4S
CHF 29.90
En stock
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF 29.90
En stock
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF 6.90
En stock
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF 29.90
En stock
+ −
Aluminum Heat Sink Motor Plate RS2.0
YOK-RS-302HM
This is an optional part for RS2.0, aluminum motor plate. It is shaped like a heat sink and improves the cooling effect of the motor. It suppresses heat leakage of the motor during driving and improves power efficiency. Effective when the temperature rises or when running outdoors during the day.
CHF 29.90
En stock
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF 14.00
En stock
+ −
YOKOMO Factory Team Cap (Gray)
YOK-ZC-A23BG
This cap features the Yokomo Racing Factory logo embroidered on it. Made with the same high-quality materials as famous brands, it boasts sturdy stitching. Stretch mesh fabric is used on the back for exceptional comfort and breathability. The underside of the flap features a contrasting color,...
CHF 29.90
En stock
+ −
YOKOMO Factory Team Cap (Yellow)
YOK-ZC-A23BY
This cap features the Yokomo Racing Factory logo embroidered on it. Made with the same high-quality materials as famous brands, it boasts sturdy stitching. Stretch mesh fabric is used on the back for exceptional comfort and breathability. The underside of the flap features a contrasting color,...
CHF 29.90
En stock
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF 29.90
En stock
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF 17.90
En stock
+ −
Catégories
Accessoires et pièces détachées
Combo avec Controler
Matériaux de décoration
pièces de rechange
Carosseries
Accessoires de carrosserie
Accessoires pour des camions
Moteur
roue et pneu
Schablonen (Paint Masks)
Tuning
+6Plus
Voitures RC
Moto RC
Machines de construction et tracteurs RC
Camions RC
Chars RC
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (263)
Compatibilité
    Afficher tout (90)
Abmessungen
Auswahlhilfe
    Afficher tout (29)
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (19)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (67)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags