Français (CH)
ERSATZTEIL-FINDER

Tuning

Trier par:
Recommandé
Montrer:
96
GS01 Rear Axle Truss upper Link mount silber
GM30017
Main features
CHF 34.90
En stock  
+ −
Alu Winde mit Fernsteuerung 1:10 Crawler
INTC25622RED
Get out of off-road trouble with our Billet Machined T8 Mega Winch w/Remote. The 1/10-scale sized winch features a high-torque motor with aluminum heatsink, Billet machined alloy case, steel winch cable and hook, and a pre-wired case-mounted toggle switch. You also get a multi-function remote...
CHF 79.90
En stock  
+ −
Schalt Relais für Empfänger, 1 Kanal
HSH-RELAIS-1K
Schalt Relais für Empfänger, 1 Kanal Das Relais wird einfach am entsprechenden Kanal beim Empfänger eingesteckt, an der Fernsteuerung den Schalter auf 2-P programmieren und schon kann das Realis per Fernsteuerung ein- und ausgeschaltet werden. Empfängerspannung: 5-9V Schaltrelais: 30V, 10A...
CHF 12.90
En stock  
+ −
Front Alloy Bumper w/ Motorized Winch Mount for Tr
INTC28483BLACK
Front Alloy Bumper w/ Motorized Winch Mount for Traxxas TRX-4 Defender
CHF 49.90
En stock  
+ −
Billet Machined Rear Lower Suspension Arms for Tra
INTC28685BLUE
Billet Machined Rear Lower Suspension Arms for Traxxas 1/10 E-Revo 2.0 C28685BLUE
CHF 49.90
En stock  
+ −
Karosserie JX10 Hartplastik für 1:10 Crawler 313
INTC30822DARKGREEN
Check out our new Realistic JX10 Hard Plastic Body Kit! This is a highly detailed, realistic looking hard body kit that features tons of scale details including: classic off-road design, detailed interior set, scale trim like fender flares, side mirrors, wipers, hood latches, door handles, and...
CHF 92.50
Rupture de stock
Alu Karosseriehalter für Arrma Kraton 1:5 8S
INTC30931RED
CHF 49.90
En stock  
+ −
Realistic JPX Scale Body w/ Steel Roll Cage & LED
INTC26623BLACK
Realistic JPX Scale Body w/ Steel Roll Cage & LED Light for 1/10 Scale Crawler
AuswahlhilfeCrawler MaterialLexan Massstab1:10 EinsatzCrawler/Scaler Lackierungunlackiert
CHF 99.00
En stock  
+ −
Alu Caster Block für X-Maxx
INTC26840BLUE
CHF 74.90
En stock  
+ −
Nouveau
Muttern M1.4, ca. 100 Stück
HSH-M1.4NUT
Muttern M1.4, ca. 100 Stück
CHF 9.90
En stock  
+ −
GS01 machined M3 44mm upper Link silber
GM30025
Main features
CHF 32.90
En stock  
+ −
Alu Winde mit Fernsteuerung 1:10 Crawler
INTC25622BLACK
Get out of off-road trouble with our Billet Machined T8 Mega Winch w/Remote. The 1/10-scale sized winch features a high-torque motor with aluminum heatsink, Billet machined alloy case, steel winch cable and hook, and a pre-wired case-mounted toggle switch. You also get a multi-function remote...
CHF 87.90
En stock  
+ −
F&R Skid & Main Chassis Protection Plates for 1/8
INTC32267
F&R Skid & Main Chassis Protection Plates for 1/8 Sledge 4WD Monster
CHF 49.00
En stock  
+ −
Alu Querlenker ob front Leopard
EL12403
 
CHF 47.50
En stock  
+ −
Gmade RSD Piggyback Shock 100mm (2)
GM23102
Designed for scale and trail trucks Real working piggyback operations Fast and Easy to change the shock setup without disassembling Sophisticated setup by simple use of piggyback adjustable valve Anodized aluminum parts CNC machined delrin shock spring adjust nut CNC machined...
CHF 39.90
Rupture de stock
Stabi rear
EL18509
 
CHF 47.50
En stock  
+ −
Alu Felgen 1.9 8H 0/+3 offset für Traxxas TRX4
INTC28008BLACKSILVER
If you have a Traxxas TRX-4 rock crawler, upgrade to our new Billet Machined 1.9-Class Type 8H Wheel Set. These 1.9-class multi-piece alloy wheels are a true beadlock design and are made specifically for the Traxxas TRX-4 platform. The wheels include two sets of alloy 6-bolt hubs in 0 and +3...
CHF 94.90
En stock  
+ −
Kipp Mechanismus für 1:14 Trucks universal
INTC27800GUN
For you custom 1/14-scale builders out there, motorize your flatbeds, dump bins, or more with our Tipper Lifting Mechanism for Custom 1/14 Builds. The mechanism is made from aluminum alloy, and features a universal drive system for extending or lowering whatever device you attach it to. An...
CHF 92.90
En stock  
+ −
Alu Getriebegehäuse E-Revo blau
INTT4120BLUE
 
CHF 69.90
En stock  
+ −
Achsschenkelverlängerung heck
EL18508
 
CHF 45.90
En stock  
+ −
Ultra High Speed Twin Lüfter Kit 17k rpm X-MAXX
INTC28697RED
Keep your Traxxas X-Maxx brushless motor running cool with our Ultra High Speed Twin Cooling Fan Kit. The kit features a pair of 17, 000 rpm fans that are mounted to an anodized aluminum alloy frame. The frame comes with mounting brackets that are specifically designed to attach to the X-Maxx...
CHF 45.00
En stock  
+ −
Dämpferbrücke Alu Monstertruck
EL14404
 
CHF 89.90
En stock  
+ −
Alu Vorderrad Set Type1 Tamiya 1:14
INTC23953SILVER
AuswahlhilfeTruck MaterialGummi Reifen/Rad-TypFelgen Massstab1:14 EinsatzOn-Road
CHF 34.90
En stock  
+ −
Alu Achsengehäuse vo/hi Axial SCX24 silber
INTC30787SILVER
CHF 89.90
En stock  
+ −
Alu Felgen 1.9 high mass m.14mm offset Hub 4stk.
INTC27032GUN
For a classic feel, try our new Billet Machined 'Classic-5' High Mass Wheel Set. These are also a 1.9-class alloy wheel with a true beadlock design. The outer alloy trim ring and center cap attach to our 'high-mass' center barrel that puts weight onto the tires for more traction. These wheels...
CHF 89.90
En stock  
+ −
Portal Axle Counterweight Add-On TRX4 rot
INTC27938RED
CHF 34.90
En stock  
+ −
Alu Felgen 1.9 für Crawler 1:10 4stk.
INTC30758
CHF 89.90
En stock  
+ −
Alu Servohalter für Arrma Kraton 6S BLX blau
INTC28666BLUE
CHF 29.90
En stock  
+ −
Radmitnehmer Traxxas 1:10 Rustler/Slash
INTT8065BLUE
CHF 10.90
En stock  
+ −
Shock Absorber front
EL12300
 
CHF 89.00
En stock  
+ −
Front Stossstange zu Traxxas TRX4 inkl. Winde
INTC28489BLACKRED
CHF 89.00
En stock  
+ −
Dirt Guard Chassis Cover for Traxxas X-Maxx
INTC26943
Going off-road with your monster truck is always fun... until afterward when you have to clean out all of the mud, dust, dirt, and pebbles from your chassis. With our Dirt Guards, you can now have a protective cover to shield your chassis and valuable electronics from debris. Our Dirt Guards are...
CHF 23.90
En stock  
+ −
Front Skid Plate for Arrma 1/8 Outcast 6S BLX
INTC28978RED
Front Skid Plate for Arrma 1/8 Outcast 6S BLX
CHF 42.50
En stock  
+ −
Alu T3 Front Bumper Axial SCX-10
INTC25244BLACK
CHF 32.90
En stock  
+ −
Predator Track Adaptersatz für HPI WR8 Flux
RC4WD-Z-S0796
Predator Track Fitting Kit for HPI WR8 Flux
CHF 84.90
En stock  
+ −
Servo Mount for Arrma Kraton 6S BLX Brushless Trug
INTC28666RED
Servo Mount for Arrma Kraton 6S BLX Brushless Truggy
CHF 27.50
En stock  
+ −
Alu Hinterräder m.Reifen TypeII Tamiya Truck
INTC24347SILVER
 
AuswahlhilfeTruck MaterialGummi Reifen/Rad-TypKomplettrad Massstab1:14 EinsatzOn-Road
CHF 65.00
En stock  
+ −
Billet Extended Rear Susp.Kit+Drive Shafts Stamped
INTC28577GREEN
Billet Extended Rear Suspension Kit+Drive Shafts for Traxxas 1/10 Stampede 2WD
CHF 79.90
En stock  
+ −
Billet Machined Servo Mount for Arrma Kraton 6S BL
INTC28666GREY
Billet Machined Servo Mount for Arrma Kraton 6S BLX Brushless Truggy C28666GREY
CHF 27.50
En stock  
+ −
Karosserie JC10 Hartplastik 1:10 Crawler 313mm
INTC30821GREEN
NOTE: PHOTOS ABOVE SHOW A PARTIALLY ASSEMBLED BODY SET. Out of the box, the body set is in multiple pieces and requires assembly and finishing.
CHF 79.90
En stock  
+ −
Alu Felgen 1.9 6H schwarz 4stk.
INTC32903BLACK
CHF 79.90
En stock  
+ −
Schutzhülle Slash 4x4 LCG wasserabw. schwarz
OUTERWEARS-20-2944-01
FITS TRAXXAS SLASH 4X4 ULTIMATE WITH LCG CHASSIS, WITH OR WITHOUT ON BOARD AUDIO. WATER REPELLENT SHROUD W/ZIPPER CLOSURE.
CHF 49.90
Rupture de stock
Alu Felgen 1.9 6H orange 4stk.
INTC32903ORANGE
CHF 79.90
En stock  
+ −
Alu Rollcage für Traxxas Rustler 4x4 blau
INTC29593BLUE
Change up the look of your Traxxas 1/10 Rustler 4X4 by installing our Alloy Roll Cage Body Kit. The Roll Cage Body features a metal frame with anodized alloy braces, and is designed to completely replace the factory body (but it may fit under aftermarket bodies). The Alloy Metal Roll Cage Body...
CHF 39.90
En stock  
+ −
Portal Axle Counterweight Add-On TRX4
INTC27937
CHF 54.90
Rupture de stock
Alu Diff Bock links Set
EL18502
 
CHF 79.00
En stock  
+ −
Ritzelsatz schrägverzahnt
EL18670
 
CHF 79.00
En stock  
+ −
Alu Side Step Board Axial SCX10 grün
INTC24693GREEN
Axial SCX10 / Dingo/ Honcho
CHF 32.90
En stock  
+ −
Auto Dachbox für 1:10
INTC29384
Realistic Plastic Cargo Carrier Roof Box 248x98x55mm for 1/10 Scale Crawlers
CHF 38.90
En stock  
+ −
Realistic Scale Water Cooler small 1:10
INTC24879SILVER
 
Auswahlhilfe190mm Touring, 200mm Touring Massstab1:10 EinsatzOn-Road, Off-Road HerstellerIntegy MarkeDiverse Marken
CHF 22.90
Rupture de stock
Realistic Rear Alloy Bumper for Traxxas TRX-4 w/ 4
INTC28579BLUE
Realistic Rear Alloy Bumper for Traxxas TRX-4 w/ 43mm Mount C28579BLUE
CHF 75.00
En stock  
+ −
Realistic Front Alloy Bumper for Traxxas TRX-4 w/
INTC28578BLUE
Realistic Front Alloy Bumper for Traxxas TRX-4 w/ 43mm Mount C28578BLUE
CHF 75.00
En stock  
+ −
Alu Wing Mount für Arrma Kraton 1:8 blau
INTC28728BLUE
Add strength and a touch of color to your Arrma 1/8 Kraton 6S BLX truck with our Billet Machined Wing Mount. The wing mount is made from aluminum alloy, and features an adjustable upper section that allows you to tune the angle of your rear wing. The Billet Machined Alloy Wing Mount is a...
CHF 44.90
En stock  
+ −
Alu Aufhängungsset B für Losi Mini-T 2.0 1:18 rot
INTC31396RED
CHF 74.90
En stock  
+ −
Clamp Type Alu 12mm Wheel Hub 10mm dick
GM70273
Main features: Light weight and CNC Machined from solid billet aircraft aluminum Aluminum wheel hub attaches with cap screw, reduces chance of axle pin falling off and improves wheel precision. Blue anodized wheel hubs Laser engraved for authenticity 10mm thick wheel hubs Fits...
CHF 9.90
Rupture de stock
Alu Aufhängungsset B für Losi Mini-T 2.0 1:18 schw
INTC31396BLACK
CHF 74.90
En stock  
+ −
Alu Motor Schnellwechselhalterung X-Maxx/XRT blau
INTC33203BLUE
If you own a Traxxas X-Maxx or XRT, you might know how frustrating and time consuming it can be to simply change motor gearing. With our Alloy Machined Quick Change Adjust Mount, you know longer have to waste time! The Alloy Machined Quick Adjust Motor Mount lets you change pinion gears and...
CHF 74.90
En stock  
+ −
Alu Rollcage für Traxxas X-Maxx 4x4 orange
INTC29616ORANGE
CHF 69.90
En stock  
+ −
Car Stand Workstation for 1/10 and 1/8
INTC33889
Car Stand Workstation for 1/10 and 1/8 RC Vehicles, 140x120x140mm
CHF 24.90
En stock  
+ −
Realistic 94mm Type Off-Road Shocks w/ Internal Sp
OBM-004BLUE
Realistic 94mm Type Off-Road Shocks w/ Internal Spring for 1/10 Scale Crawler OBM-004BLUE
CHF 35.00
En stock  
+ −
Radmitnehmer 17mm DST/DBX & DRX
K.TRW106
 
CHF 34.90
En stock  
+ −
Querlenker heck oben
EL18507
 
CHF 69.90
En stock  
+ −
Realistic Metal Luggage Tray 267x169mm
INTC26167SILVER
Add scale looks to your 1/10 crawler or rig with our Realistic Luggage Tray w/LEDs.
CHF 69.90
En stock  
+ −
Realistic Metal Luggage Tray 1:10 267x169mm
INTC26167BLACK
Add scale looks to your 1/10 crawler or rig with our Realistic Luggage Tray w/LEDs.
CHF 69.90
En stock  
+ −
Alu Lenkung silver 1:10 E-Revo
INTT4135SILVER
 
CHF 34.90
En stock  
+ −
Side Protection Nerf Bars für X-MAXX, grau
INTC26834GREY
Side Protection Nerf Bars für X-MAXX, grau
CHF 69.90
En stock  
+ −
Alu 4Link Suspension Mount Axial Yeti
INTC26038RED
 
CHF 34.90
En stock  
+ −
GS01 machined m3 78mm Bent lower Link grau
GM30028
Main features
CHF 34.90
En stock  
+ −
Dirt Guard für Arrma Kraton 6S BLX
INTC28825
CHF 34.90
En stock  
+ −
Hex Adapter Front Wheel Type I for Custom 1/14
INTC26324SILVER
 
CHF 34.90
En stock  
+ −
WINDEN ANKER 1:10 grau
INTC26130GUN
CHF 34.90
En stock  
+ −
Querlenker Monster vorne l+r paa
EL14401+14402
 
CHF 69.00
En stock  
+ −
Wasserkühler gross 1:10 Drift rot
INTC24880RED
CHF 22.90
En stock  
+ −
Alu Lenkteile für Traxxas Summit 1:10 blau
INTC26054BLUE
CHF 33.90
En stock  
+ −
XSR2 HeavyDuty Piggyback Shock Set for Stampede 2W
INTT7882BLUE
XSR2 HeavyDuty Piggyback Shock Set for Stampede 2WD & Rustler 2WD
CHF 65.90
En stock  
+ −
Skid Plate for Gmade GS01
GM52410S
Main features: CNC machined aircraft aluminum Silver anodized skid plate Skid plate wraps under the side plates to help you slide over the rocks better Radius edges prevent hang-up Fits Gmade GS01 chassis What's included: Skid plate x 1 Installation Screws
CHF 24.90
En stock  
+ −
Boxen Zelt 1:10 grün
INTC26484GREEN
 
CHF 32.90
En stock  
+ −
GPM Alu Body Mount & Stabilizer für T3-01 Dancing
GR-T3201-GS
Seitenbügel
CHF 32.90
En stock  
+ −
Alu Vorderräder inkl. Reifen Type III Tamiya Truck
INTC24348SILVER
 
AuswahlhilfeTruck MaterialGummi Reifen/Rad-TypKomplettrad Massstab1:14 EinsatzOn-Road
CHF 29.90
En stock  
+ −
Achsschenkel erhöht links
EL18512
 
CHF 62.50
En stock  
+ −
Ausfederwegbegrenzer Alu front
EL13406
 
CHF 20.00
En stock  
+ −
Alu Vorderachse für Tamiya 1:14
INTC24822BLACK
CHF 32.90
Rupture de stock
Hinterachsbock erhöht TW
EL11501
 
CHF 59.90
En stock  
+ −
Alu T10 Hight Torque Winde rot
INTC25871RED
 
CHF 59.90
En stock  
+ −
Aluminium C-Hub Carrier (2) for R1 Axle
GM51103S
2 Stück, für die Vorderachse.
CHF 42.50
En stock  
+ −
Realistic T4 Adjustable Spot Light Bar (5) w/ LED
INTC25138BLACK
CHF 29.90
En stock  
+ −
Multi Setting 90/120 Front Rocker for 1/10 E-Revo
INTT4129GREY
 
CHF 29.90
En stock  
+ −
Alu Zero Ackerman Achsschenkel grau
GM30038
Main Features:
CHF 49.90
En stock  
+ −
Alloy 14 Spoke Silver Steering Whee
INTC33903
Alloy 14 Spoke Silver Steering Wheel Upgrade for Flysky NB4 Controller
CHF 29.90
En stock  
+ −
Kugellager Achsschenkel (4stk)
EL18700
 
CHF 19.90
En stock  
+ −
Stahl Teleskop-Kardan Front Slash/Stamp. 4x4 2Stk.
INTT8637
 
CHF 35.00
En stock  
+ −
Billet Machined Realistic Rear Bumper Axial SCX-10
INTC26727SILVER
 
CHF 57.90
En stock  
+ −
Achsschenkel vorne rechts
EL18403
 
CHF 57.50
En stock  
+ −
Alu Querl. hint.unt. Stampede2WD / Rustler blau
INTT8079BLUE
 
CHF 29.90
En stock  
+ −
Schwinge unten L Alu Marder
EL13401
 
CHF 55.00
En stock  
+ −
Untere Schwinge Alu R front
EL13402
 
CHF 55.00
En stock  
+ −
Catégories
Tuning
Combo avec Controler
Matériaux de décoration
pièces de rechange
Carosseries
Accessoires de carrosserie
Accessoires pour des camions
Moteur
roue et pneu
Schablonen (Paint Masks)
+6Plus
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller
    Afficher tout (19)
Compatibilité
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 369.9
Reifen/Rad-Typ
Massstab
Einsatz
Lackierung
Marke
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags