ERSATZTEIL-FINDER

Ersatzteile

Ordnen nach:
Empfohlen
48
Rear ESC mount for YD-2 series (Purple)
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
Auf Lager  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
Auf Lager  
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF5.90
Auf Lager  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF84.90
Auf Lager  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF84.90
Auf Lager  
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2A
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF75.90
Nicht auf Lager
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF16.90
Auf Lager  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF41.90
Auf Lager  
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF6.50
Auf Lager  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF9.90
Auf Lager  
+ −
Aluminum Center Link BD9/BD10
YOK-B9-201LBAA
including Ball bearing
CHF27.90
Auf Lager  
+ −
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF27.90
Auf Lager  
+ −
Aluminum top shaft for YZ-2DTM3/CAL3
YOK-Z2-303TA3A
For Z2-670S
CHF17.90
Auf Lager  
+ −
Aluminium Motor Plate SO3.0
YOK-SO-304
CHF27.90
Auf Lager  
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF13.90
Auf Lager  
+ −
10×6mm Bearing
YOK-BB-106-4A
entspricht: BB-106-4
CHF13.90
Auf Lager  
+ −
RTC Graphite molded rear suspension arm for BD10/9
YOK-B10-RTC-1A
entspricht: B10-RTC-1
CHF13.90
Auf Lager  
+ −
30mm Fan Shroud SO2.0
YOK-SO-FSS20
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF13.90
Auf Lager  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF24.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
Auf Lager  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF41.50
Auf Lager  
+ −
Aluminum frame 30mm Cooling fan (Silver)
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF33.90
Auf Lager  
+ −
YOKOMO Factory T-Shirt L size
YOK-ZC-T27LA
entspricht: ZC-T27L
CHF27.40
Auf Lager  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF27.40
Auf Lager  
+ −
Steering block L/R
YOK-Z2-415SH3A
Hard type
CHF7.90
Auf Lager  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF13.50
Auf Lager  
+ −
Upper Deck
YOK-B7-00314
 
CHF26.90
Auf Lager  
+ −
RP Driftfelge High Tract.(6mm Offset) weiss 1paar
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF9.50
Auf Lager  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF26.90
Auf Lager  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF26.90
Auf Lager  
+ −
Ventilated Dual Slipper Set YZ-2/B-Max2
YOK-Z2-670V
CHF39.90
Auf Lager  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF26.90
Auf Lager  
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
Auf Lager  
+ −
Front Balance Weight (L/R 1 each·10g)
YOK-B7-BWF10
CHF29.90
Auf Lager  
+ −
Rear Transmission Case L/R (Carbon) YZ-4
YOK-Z4-302R
 
CHF11.50
Auf Lager  
+ −
Hard Graphite main Chassis YR-10 Formula
YOK-YR-02H
Hard graphite main chassis for YR-10 Formula
CHF79.90
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF17.90
Auf Lager  
+ −
Alu Susp. Mount Set YD-2
YOK-Y2-301AS
 
CHF79.90
Auf Lager  
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF79.90
Auf Lager  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF11.50
Auf Lager  
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF79.90
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Rot für RD2.0
YOK-RD-301ASR
CHF79.90
Auf Lager  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF7.90
Auf Lager  
+ −
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF79.90
Auf Lager  
+ −
Alu rear hub carrier (Toe-in 0.5°) for B-MAX4III
YOK-B4-415R05
 
CHF39.90
Auf Lager  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series.
CHF26.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (207)
Passend zu...
    Alle zeigen (73)
Abmessungen
Auswahlhilfe
    Alle zeigen (26)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Alle zeigen (46)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags