Français (CH)
ERSATZTEIL-FINDER

pièces de rechange

pièces de rechange

Trier par:
Recommandé
Montrer:
48
Graphite High Traction Main Chassis YD2SXIII
YOK-Y2-002SMGA
This all new main chassis made of graphite changes the running characteristics of the car by drastically changing the shape. Although optimized for the YD-2SXIII, the screw hole positions on the main chassis are the same, so E-series gearboxes and rear motor conversions can also be installed....
CHF 112.90
En stock  
+ −
Team Yokomo Rookie Off-Road 2WD Buggy 1:10 Bausatz
YOK-ROR-010
We are pleased to announce the release of the new RO1.0 chassis kit, ideal for beginners and intermediate off-road racers. The kit is reasonably priced and comes with pre-assembled dampers, turnbuckle tie rods, etc., as well as a pre-cut body for easy assembly. The body is also pre-cut for...
Massstab1:10 Motor / AntriebElektro Bürstenmotor, Elektro Brushless-Motor EinsatzOff-Road AnspruchAnfänger/Einsteiger FertigungsgradBausatz
CHF 249.90
En stock  
+ −
Optional parts set for YD-2 series Upgrade 4
YOK-Y2-OP4A
By increasing the rigidity of the shock tower, the suspension will move even better. Considering the lightweight finish on the front side, we chose a graphite hybrid shock tower and a lightweight integrated bulkhead.
CHF 124.90
En stock  
+ −
Front SP Steering Block for Yokomo YD-2
YOK-Y2-415SA
 
CHF 69.90
En stock  
+ −
Aluminum Main Chassis U.S. Version BD11
YOK-B11-002AU
BD11US specification aluminum main chassis. By not removing meat, it increases rigidity, promotes a low center of gravity, and is suitable for high-grip road surfaces.
CHF 124.90
En stock  
+ −
Main Drive Shaft graphite YD-4
YOK-Y4-644G
 
CHF 41.50
En stock  
+ −
Alu Front upper A arm YD-2
YOK-Y2-008FUCA
entspricht: Y2-008FUC
CHF 47.90
En stock  
+ −
Competition Brushless ESC RPX4
YOK-BL-RPX4
The ultimate speed controller, which exceeds the power of the RPX2 and the ease of handling of the RPX3, is now available in an updated version! The state-of-the-art power MOS FETs have been rigorously tested in racing environments. It maximises the performance of stock motors and allows the...
CHF 249.00
En stock  
+ −
Aluminum rear hub carrier for YZ-4SF2
YOK-S4-415RS2A
Aluminum rear hub carrier compatible with the sturdy F3mm outer suspension arm pin. Four types of bushes for passing suspension pin are attached, and the height can be adjusted in 7 steps by switching the height. Also, it also has the effect of increasing rear traction due to rise of...
CHF 82.90
En stock  
+ −
Alu Servo Mount Set YZ-2
YOK-Z2-203AA
entspricht: Z2-203A
CHF 29.90
En stock  
+ −
Alu front upper A arm holder rear YD4
YOK-Y4-302UR
 
CHF 34.90
En stock  
+ −
Aluminum Adj. Suspension Mount Set Purple RD2.0
YOK-RD-301ASP
CHF 79.90
En stock  
+ −
Heavy Duty Gokuraku OR Wing narrow
YOK-ZS-GWBNHA
entspricht: ZS-GWBNH
CHF 14.90
En stock  
+ −
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF 79.90
En stock  
+ −
BN Sports Toyota JZX100 Mark2 Body Set
YOK-SD-JZXBNB
The JZX100 Mark II, the most popular 4-door body, will be released as a new body for drifting. Moreover, the body is designed with BN Sports aero that brings out the power of a drift machine, and the one-piece molded body is easy to build and has a great silhouette. The all-in-one body also comes...
Auswahlhilfe190mm Touring MaterialLexan Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF 79.90
En stock  
+ −
Alu adjustable rear short H arm for YD-2 (Red)
YOK-Y2-R08RASA
entspricht: Y2-R08RAS
CHF 99.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (White)
YOK-DP-GR86W
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Drift Package 2WD Pandem GR Supra Kit (Red)
YOK-DP-GRA90R
This is a kit with pre-painted body of the Drift Package 2WD based on the RD2.0. By pre-painting and cutting the body, which can be difficult for beginners, the kit production time and effort is greatly reduced, allowing you to enjoy the fun of chassis assembly while also making it easier to...
CHF 239.00
En stock  
+ −
Aluminum adjustable rear H arm kit for YD-2/YD-4
YOK-Y2-008RAA
This all new rear H arm has made by aluminum with our original high precision processing to enable the driver to make an adjustment for chassis tread for finding out the best chassis balance and also suites for the variety of car bodies width as well.   Adjustable length for each...
CHF 95.00
En stock  
+ −
Graphite Main Chassis YD-4
YOK-Y4-002
 
CHF 119.00
En stock  
+ −
BD8/BD7'16 Rear Toe Control system kit (ARS)
YOK-B8-RTC
CHF 57.90
En stock  
+ −
Aluminum cramp servo horn 17mm (for FUTABA)
YOK-ZC-204517A
entspricht: ZC-204517
CHF 17.90
En stock  
+ −
YD-2Z Front Upgrade Set schwarz
YOK-Y2-FUSBA
A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for...
CHF 115.00
En stock  
+ −
Aluminium Rear Susp. Mount (Rear/L5 Arm) YZ-4
YOK-Z4-300LRR
 
CHF 32.50
En stock  
+ −
Rear ESC Mount for YD-2 series
YOK-Y2-REMA
Please be informed that Introducing new ESC Rear mount option for our YD-2 series drift chassis. The final design is a result of extensive field testing by Team Yokomo drivers. It has the best balance between mounting position and weight distribution/transfer. The new option is a 2 piece...
CHF 42.90
En stock  
+ −
Differenzialgehäuse mit 42T Pulley MS2.0
YOK-MS-503GH-2
CHF 74.90
En stock  
+ −
YC-1134 Parts Case Set
YOK-YC-1134A
Parts Case Set 255x190x60mm
CHF 28.90
En stock  
+ −
Sway Bar Set RS2.0 (Only Aluminum Bulkhead)
YOK-RS-412AS
These stabilizers can be mounted on RS2.0 aluminum lower bulkheads. The set comes with three different bars, front and rear, each with ball bearing support for smooth operation and increased stabilizing effect.
CHF 55.90
En stock  
+ −
Alu Front upper A arm holder legt YD-4
YOK-Y4-302UHL
 
CHF 31.90
En stock  
+ −
HD f5.5mm Ball end cap for YZ-2/YZ-4
YOK-Z2-206DM2A
entspricht: Z2-206DM2
CHF 9.90
En stock  
+ −
Alu Front upper A arm holder right YD-4
YOK-Y4-302UHR
 
CHF 31.90
En stock  
+ −
BD7-2016 High Traction Graphite Main Chassis
YOK-B7-00216S
High Traction Graphite Main Chassis (Increase Traction)
CHF 109.90
En stock  
+ −
Aluminum ball diff kit for YD-2 series
YOK-Y2-500AA
entspricht: Y2-500A
CHF 34.90
En stock  
+ −
Graphite main chassis (Hard) for BD9
YOK-B9-00219H
A new hard main chassis for the BD9 is now available!
CHF 109.90
En stock  
+ −
Optional parts set for YD-2 series Upgrade 2
YOK-Y2-OP2A
Axles and bearings that lightly finish the rotation of the tire. It is possible to prevent spin by improving the running of the front. In addition, the variable kingpin angle steering block provides optimal wheel alignment for drift driving.
CHF 109.90
En stock  
+ −
Alu Rear Brace with Cooling Fan YD-2
YOK-Y2-303RBFA
entspricht: Y2-303RBF
CHF 54.90
En stock  
+ −
Drift Package 2WD Pandem GR86 Kit (Clear)
YOK-DP-GR86
The famous "DRIFT PACKAGE", the pioneer of drift RC cars and synonymous with drift RC cars, is back in 2WD form! Based on a conventional assembly kit, this reasonably priced package includes a clear body and tires/wheels. If you purchase the steering gyro and running set, you can enjoy...
CHF 219.00
En stock  
+ −
Upper Arm Mount Rear YZ-4
YOK-Z4-300RU
 
CHF 9.90
En stock  
+ −
Universal Shaft 68mm Bone DTM2
YOK-Z2-01068A
entspricht: Z2-01068
CHF 34.90
En stock  
+ −
Front Suspension Arm (Graphite)Flat +1? long YZ-4
YOK-Z4-008F1
 
CHF 13.50
En stock  
+ −
Rear Belt 103T YZ-4
YOK-Z4-309-8
CHF 17.90
En stock  
+ −
YZ-2 F2 light-Weight Body (with Masking)
YOK-Z2-DTMWBA
entspricht: Z2-DTMWB
AuswahlhilfeBuggy MaterialLexan Massstab1:10 EinsatzOff-Road Lackierungunlackiert
CHF 24.90
En stock  
+ −
Hard main chassis (Short type)
YOK-Z2-002DA
For Dirt track
CHF 105.00
En stock  
+ −
Alu Conversion Kit für Yokomo SD
HSH-YOK-ALUCONV
Alu Conversion Kit für Yokomo SD Aluminium blau, inkl. Kugellager
CHF 69.90
En stock  
+ −
"Teams" Light weight FLEX Chassis Set für YD-2
YOK-Y2-002TSA
Team Yokomo's competition drift brand, Teams, is proud to announce the release of the new light weight flex chassis set for the YD-2 series. The lightweight graphite main chassis plate and special lightweight battery holder provide the right amount of rigidity and traction for a more...
CHF 209.00
En stock  
+ −
Alu Steering Hub Carrier YZ-2
YOK-Z2-413A
 
CHF 59.90
En stock  
+ −
Graphite molded S3/LD rear sus-arm YZ2-DTM/CAL
YOK-Z2-008R3GA
For YZ-2 DTM/CAL 3/3.1
CHF 16.90
En stock  
+ −
Motor Mount
YOK-B9-302MA
entspricht: B9-302M
CHF 49.50
En stock  
+ −
Catégories
pièces de rechange
Pignions
Combo avec Controler
Matériaux de décoration
Carosseries
Accessoires de carrosserie
Accessoires pour des camions
Moteur
roue et pneu
Schablonen (Paint Masks)
Tuning
+6Plus
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (212)
Compatibilité
    Afficher tout (81)
Abmessungen
Auswahlhilfe
    Afficher tout (26)
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (46)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags