ERSATZTEIL-FINDER

Ersatzteile

Ordnen nach:
Empfohlen
96
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF14.90
Auf Lager  
+ −
L5 Rear Suspension Arm YZ-4
YOK-Z4-008RL5
CHF9.65
Auf Lager  
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
Auf Lager  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
Auf Lager  
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF32.90
Auf Lager  
+ −
Racing Performer M3 Motor 4.5T
YOK-RPM-TC45
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF25.90
Auf Lager  
+ −
Racing Performer M3 Motor 5.5T
YOK-RPM-4W55
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-J135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Titanium Turn Buckle Set (9pcs)
YOK-B7-TBSA
CHF45.90
Auf Lager  
+ −
Racing Performer M3 Motor 13.5T
YOK-RPM-4W135
Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF129.90
Auf Lager  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF129.90
Auf Lager  
+ −
Graphite Steering Block BD9/BD10
YOK-B9-415SGA
entspricht: B9-415SG
CHF14.50
Auf Lager  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF64.90
Auf Lager  
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF42.90
Auf Lager  
+ −
Gear differential set for BD10
YOK-B10-500GSA
A gear differential set used for the rear differential of BD10. # 7500 differential oil is included with the gear differential assembly.
CHF52.90
Auf Lager  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF12.80
Auf Lager  
+ −
Graphite molded L5/LD rear sus-Arm YZ-4SF2/YZ-2
YOK-S4-008R5GA
For YZ-4SF2/YZ-2CAL DTM3 and 3.1
CHF15.90
Auf Lager  
+ −
Adjustable Suspension Mount Set
YOK-Y2-301ACA
entspricht: Y2-301AC
CHF89.90
Auf Lager  
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF21.00
Auf Lager  
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF62.90
Auf Lager  
+ −
“X30” 13 shock set (rear/short)
YOK-S4-S1M13
This is a F13mm big bore shock set. The M size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF41.90
Auf Lager  
+ −
Racing Performer HYPER cooling fan (30mm size comp
YOK-RP-033A
entspricht: RP-033
CHF22.90
Auf Lager  
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF41.90
Auf Lager  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
Auf Lager  
+ −
Karosseriehalter magnetisch hinten
YOK-Y2-016MGRA
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
Auf Lager  
+ −
Carbon Graphite main chassis YD-4MR
YOK-Y4-002MR
 
CHF119.90
Auf Lager  
+ −
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF119.90
Auf Lager  
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF49.90
Nicht auf Lager
Rear X Shock Ver II Set
YOK-B2-S1L
 
CHF59.90
Auf Lager  
+ −
Front X Shock Ver II Set
YOK-B2-S1S
 
CHF59.90
Auf Lager  
+ −
"X33" shock X ring
YOK-Z2-S3XA
entspricht: Z2-S3X
CHF6.50
Auf Lager  
+ −
Aluminum front lower A arm for 2WD DRIFT Conv.
YOK-D-164
 
CHF59.90
Auf Lager  
+ −
M4 Serrated Flange Nut 11mm dünn 4stk.
YOK-ZC-N4FLTA
entspricht: ZC-N4FLT
CHF8.90
Auf Lager  
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF59.90
Auf Lager  
+ −
Aluminum cramp servo horn 20mm (for FUTABA)
YOK-ZC-204520A
entspricht: ZC-204520
CHF17.90
Auf Lager  
+ −
V4 Steering Gyro Blue Version
YOK-DPP-302V4BL
This is the blue version of the V3 Gyro, which is used by a high percentage of top drivers. Four modes are provided for different levels of operation, allowing you to select the level of interference with which the gyro will operate. Endponts can also be set for easy adjustment to your...
CHF59.90
Auf Lager  
+ −
Alu Rear Weight H Arm Blau für RD2.0/SD2.0
YOK-Y2-BL8RAW
CHF59.90
Auf Lager  
+ −
Yokomo Muffler Cutter
YOK-SD-ACMC2A
entspricht: SD-ACMC2
CHF8.90
Auf Lager  
+ −
Alu Rear Weight H Arm Rot für RD2.0/SD2.0
YOK-Y2-R08RAW
CHF59.90
Auf Lager  
+ −
Body Set (with Masking) Super Dog Fighter Works 91
YOK-YZ-101W1
CHF59.90
Auf Lager  
+ −
Graphite Battery Holder set for BD10
YOK-B10-118GA
entspricht: B10-118G
CHF47.90
Auf Lager  
+ −
Main chassis for MR/RS
YOK-B2-002MR
 
CHF39.90
Auf Lager  
+ −
Universal shaft for YZ-2T
YOK-Z2-01075TA
entspricht: Z2-01075T
CHF39.90
Auf Lager  
+ −
Alu Shim 3x6x1.0mm (Black)
YOK-ZC-A3610BA
entspricht: ZC-A3610B
CHF5.90
Auf Lager  
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF39.90
Auf Lager  
+ −
Graphite battery holder for MR/RS Midship
YOK-B2-118MA
 
CHF29.90
Auf Lager  
+ −
Rear“X30”shock set
YOK-S4-S1LA
entspricht: S4-S1L
CHF69.90
Auf Lager  
+ −
Alu Front Susp.Mount for BD7 (Rear side 43.5mm)
YOK-B7-3135FR
the new block has increased steering response as well as
CHF23.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT1
YOK-CS-DOT1
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
Auf Lager  
+ −
Karosserie YZ4-SF
YOK-S4-101A
entspricht: S4-101
CHF34.90
Auf Lager  
+ −
Steel front lower suspension mount for YZ-2CAL 3.1
YOK-Z2-300FLSA
entspricht: Z2-300FLS
CHF29.50
Auf Lager  
+ −
Karosserie 1:10 FWD Type-A
YOK-SP-FWDABA
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF57.90
Auf Lager  
+ −
Program card for SP-02DV2/SP-03DV2 servo
YOK-SP-03DPC-1
This is a dedicated programmer that can be connected to programmable servos such as SP-02DV2/SP-03DV2 for drifting and rewrite settings. The main unit is powered from a USB connector, etc., and by connecting the servo cable directly, the power, torque, hunting suppression value,...
CHF34.90
Auf Lager  
+ −
Alu Main Shaft (Anodized) YZ-4
YOK-Z4-644H
 
CHF8.90
Auf Lager  
+ −
Racing performer Rotor M4 D12.2 x d7.25 titan
YOK-RP-095A
entspricht: RP-095
CHF57.50
Auf Lager  
+ −
Racing Performer Rotor M4 D12.5 x 7.25 titan
YOK-RP-096A
entspricht: RP-096
CHF57.50
Auf Lager  
+ −
Univ. Drive Shaft 49mm YD-2
YOK-Y2-010A
 
CHF32.50
Auf Lager  
+ −
Alu Transmission Case edge trimmed YD-4
YOK-Y4-302C
 
CHF114.90
Auf Lager  
+ −
Alu Center Mount (Chamfer) YZ-4
YOK-Z4-304LC
 
CHF22.90
Auf Lager  
+ −
Graphite Front ST Hub Carieer BD9/BD10
YOK-B9-413GA
entspricht: B9-413G
CHF14.90
Auf Lager  
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF22.90
Auf Lager  
+ −
Front & Rear Shock Tower/Spacer YZ-4
YOK-Z4-017
 
CHF18.90
Auf Lager  
+ −
6 mm Rear wheel hub
YOK-Z2-011R6A
 
CHF12.50
Auf Lager  
+ −
Graphite Front Upper Arm YR-10U
YOK-YR-10U
CHF18.90
Auf Lager  
+ −
Aluminum bulk head mount for YZ-2 series
YOK-Z2-018BMAA
entspricht: Z2-018BMA
CHF56.50
Auf Lager  
+ −
Gear Differential Set
YOK-B9-500GS
(38T)
CHF49.90
Auf Lager  
+ −
Alu Chassis US Spec für BD12
YOK-B12-002AU
Aluminum main chassis for the BD12 competition touring car. It is a highly rigid US specification with little wall removal, making it ideal for high-grip carpeted surfaces. The center of gravity is lowered, which is also effective as a high-side countermeasure.
CHF112.90
Auf Lager  
+ −
Alu Steering Bell Crank für 2WD Drift
YOK-D-163
 
CHF55.90
Auf Lager  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
Auf Lager  
+ −
Motor Mount für PCS
YOK-B8-302M2
 
CHF55.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder C (46.4~49.6mm)
YOK-TS-2151
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
Bearing F5 x F10 x 4mm
YOK-BB-105-2A
entspricht: BB-105-2
CHF6.90
Nicht auf Lager
Center Balance Weight
YOK-B9-BW50A
50g
CHF27.90
Auf Lager  
+ −
Gear Differential Bevel Gear Set
YOK-BD-503G
 
CHF15.90
Auf Lager  
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF37.90
Auf Lager  
+ −
Chassis Platte BD12 Carbon
YOK-B12-002
CHF109.90
Auf Lager  
+ −
Graphite Front Shock Tower YZ4-SF
YOK-S4-017A
entspricht: S4-017
CHF18.90
Auf Lager  
+ −
Rear Double Joint Universal Shaft
YOK-BD-010RW
 
CHF54.90
Auf Lager  
+ −
Rear toe control system for BD8-2018
YOK-B8-RTC18
CHF54.90
Auf Lager  
+ −
MIP Puck Drive cup protector rebuild kit for YZ-2
YOK-Z2-17045
CHF54.90
Auf Lager  
+ −
Alu steering hub carrier für YZ-4SF2
YOK-S4-41306A
An aluminum front steering hub carrier that further enhances the cornering performance of YZ-4SF2 on high grip road surfaces such as carpets or artificial grass. Comparing with standard caster angle (8 degrees), the caster angle of 6 degrees is specialized for high grip road surfaces....
CHF52.90
Auf Lager  
+ −
Aluminum Front Bulkhead Bridge SD3.0
YOK-SD-302S3
CHF54.90
Auf Lager  
+ −
Alu Front Suspension Mount for BD7 (FR 42.7mm)
YOK-B7-3127FR
the new block has increased steering response as well as
CHF21.90
Auf Lager  
+ −
Metal gear diff kit (High capacity) for YZ-2 serie
YOK-Z2-500MG3A
High capacity
CHF43.90
Auf Lager  
+ −
Alu Front Suspension Mount (Rear/44.2mm)
YOK-B7-3142FR
This one piece designed aluminum suspension mount in 44.2mm for rear side at front suspension.
CHF21.90
Auf Lager  
+ −
Racing Performer M4 BL Motor 17.5T für Off-Road
YOK-RPM-M0175
Rotor F12.5×5.0×24.2
CHF109.00
Auf Lager  
+ −
Alu Rear Suspension Mount in Rear (w. S4-300BS)
YOK-Z2-300RR4A
entspricht: Z2-300RR4
CHF22.90
Nicht auf Lager
Racing Performer M4 BL Motor 3.5T
YOK-RPM-M435A
Rotor 12.2x7.25x24.2 10020 Kv
CHF109.00
Auf Lager  
+ −
Racing Performer M4 BL Motor 4.5T
YOK-RPM-M445A
Rotor 12.2 x 5.0 x 24.2 7166Kv
CHF109.00
Auf Lager  
+ −
J Concept YZ-4SF F2 Light weight
YOK-S4-101LW2A
entspricht: S4-101LW2
CHF32.90
Auf Lager  
+ −
Graphite main chassis BD11
YOK-B11-002A
entspricht: B11-002
CHF109.00
Auf Lager  
+ −
Matte Graphite Main Chassis YZ-870C
YOK-YZ-002G
Graphite parts that further enhance the performance of the YZ-870c Super Dogfighter are now available. The lightweight and highly rigid graphite material has a matte black surface finish that does not detract from the machine's image. In addition to parts that upgrade existing FRP parts such as...
CHF109.00
Auf Lager  
+ −
3×6×2.0mm Alu Shim (8pcs·Black)
YOK-ZC-A3620BA
entspricht: ZC-A3620B
CHF5.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (205)
Passend zu...
    Alle zeigen (73)
Abmessungen
Auswahlhilfe
    Alle zeigen (26)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
    Alle zeigen (11)
Marke
    Alle zeigen (46)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags