ERSATZTEIL-FINDER

pièces de rechange

pièces de rechange

Trier par:
Recommandé
96
Gear Diff 40T Ring Gear (for S4-503D16) YZ4-SF
YOK-S4-503R16A
entspricht: S4-503R16
CHF34.50
En stock  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
En stock  
+ −
HVF Shock shaft (19.1mm/Heavy fluorine coat) BD9
YOK-B9-S5SHVFA
entspricht: B9-S5SHVF
CHF27.50
En stock  
+ −
L5 Rear Suspension Arm YZ-4
YOK-Z4-008RL5
CHF9.65
En stock  
+ −
Plastic Bevel Gear Dif Assy (with Aluminum Drive c
YOK-Y2-500GSAA
entspricht: Y2-500GSA
CHF49.90
En stock  
+ −
Metal gear diff kit (High capacity) for YZ-2 serie
YOK-Z2-500MG3A
High capacity
CHF43.90
En stock  
+ −
Aluminum Rear Hub Carrier RTC BD11
YOK-B11-RTC-3
Aluminum rear hub carrier that can be used for BD10/11. It is a hub carrier for the RTC (rear toe control system) that is standard on the BD11, and by setting the angle of the kingpin to 4 degrees, which is an increase from the standard reverse caster 2 degrees, it is possible to control...
CHF43.90
En stock  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF25.90
En stock  
+ −
Alu Front Bumper Brace YD2/YD4
YOK-Y2-001BA
 
CHF32.90
En stock  
+ −
Titanium Screw Set for SO2.0
YOK-RP-115
This set allows the 104 screws used in the Super Off-Road SO2.0 to be made of titanium. All titanium screws are manufactured by high-precision cutting, so they are well finished when the machine is assembled, allowing for a solid machine build.
CHF129.90
En stock  
+ −
Titanium Turn Buckle Set (9pcs)
YOK-B7-TBSA
CHF45.90
En stock  
+ −
Front double joint univ. shaft (with Bearing) YZ-4
YOK-Z4-010FW
 
CHF64.90
En stock  
+ −
Alu rear hub carrier (Toe-in 1.0°) for B-MAX4III
YOK-B4-415R10
 
CHF42.90
En stock  
+ −
Adjustable Suspension Mount Set
YOK-Y2-301ACA
entspricht: Y2-301AC
CHF89.90
En stock  
+ −
Graphite Molded Front Bulkhead for RO/SO
YOK-Z2-002BG
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF12.80
En stock  
+ −
Steering Limiter Screw 8/8.5/9 stck je
YOK-B7-201LS
CHF21.00
En stock  
+ −
Racing Performer HYPER cooling fan (30mm size comp
YOK-RP-033A
entspricht: RP-033
CHF22.90
En stock  
+ −
Alu Transmission Case (edge trimmed) upper YD-4
YOK-Y4-302UC
 
CHF62.90
En stock  
+ −
“X30” 13 shock set (rear)
YOK-S4-S1L13
This is a F13mm big bore shock set. The L size is ideal for the rear of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
En stock  
+ −
Aluminum cramp servo horn 20mm (for FUTABA)
YOK-ZC-204520A
entspricht: ZC-204520
CHF17.90
En stock  
+ −
Full counter solid axle set (Rear×1.5/Blue)
YOK-IB-FCD15
 
CHF41.90
En stock  
+ −
Bell Crank (8x5 bearing assembled)
YOK-B7-202SBA
 
CHF41.90
En stock  
+ −
Karosseriehalter magnetisch hinten
YOK-Y2-016MGRA
Magnet type rear body mount. Attach the aluminum mount post to the rear from the rear shock tower and attach the steel adapter. Even if the body is lifted, it can be firmly fixed so that it will not come off the chassis, and it is safe even if it vibrates or crashes while driving.
CHF28.90
En stock  
+ −
Alu Chassis für BDFWD/BD10F
YOK-BD-002FA
CHF124.90
En stock  
+ −
Alum.Steering Block Set (2pcs.) for MS1.0
YOK-MS-415AS
This aluminum steering block improves machine response and traction by replacing the plastic steering block.Graphite arm plates provide ample rigidity, and by replacing the plates up and down, various bump steer settings are possible. Each product comes in a pack of two, but the aluminum...
CHF61.60
En stock  
+ −
"X33" shock X ring
YOK-Z2-S3XA
entspricht: Z2-S3X
CHF6.50
En stock  
+ −
Front/Rear Sway Bar Set for RS1.0
YOK-RS-412
This stabilizer set controls the roll of the RS1.0 and improves its turning performance on high-grip surfaces and other surfaces to enhance driving performance. It comes as a front and rear set, with 3 types of stabilizer bars from 1.2mm to 1.4mm, so you can enjoy setting it up according to the...
CHF41.00
En stock  
+ −
Carbon Graphite main chassis YD-4MR
YOK-Y4-002MR
 
CHF119.90
En stock  
+ −
M4 Serrated Flange Nut 11mm dünn 4stk.
YOK-ZC-N4FLTA
entspricht: ZC-N4FLT
CHF8.90
Rupture de stock
SD1.0/YD-2Z/YD-2ZS Alu Chassis
YOK-Y2-002AL
This aluminum main chassis is used as the standard chassis in SD1.0, and its 2.0mm thickness provides high rigidity and stability. It also provides more traction to the front, resulting in better control on corner exits and preventing understeer, which can cause significant demerit...
CHF119.90
En stock  
+ −
Rear X Shock Ver II Set
YOK-B2-S1L
 
CHF59.90
En stock  
+ −
Yokomo Muffler Cutter
YOK-SD-ACMC2A
entspricht: SD-ACMC2
CHF8.90
En stock  
+ −
Front X Shock Ver II Set
YOK-B2-S1S
 
CHF59.90
En stock  
+ −
Karosserie Set Pandem GR86 1:10 klar
YOK-SD-GR86B
The Toyota GR86, one of the most popular sports cars, is now available in a new body set with PANDEM specifications that are fearlessly finished with powerful over fenders. The body width is set at approximately 200mm, which can be used for drifting and also for speed driving,...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF59.90
En stock  
+ −
Graphite Battery Holder set for BD10
YOK-B10-118GA
entspricht: B10-118G
CHF47.90
En stock  
+ −
V4 Steering Gyro Blue Version
YOK-DPP-302V4BL
This is the blue version of the V3 Gyro, which is used by a high percentage of top drivers. Four modes are provided for different levels of operation, allowing you to select the level of interference with which the gyro will operate. Endponts can also be set for easy adjustment to your...
CHF59.90
En stock  
+ −
Alu Rear Weight H Arm Blau für RD2.0/SD2.0
YOK-Y2-BL8RAW
CHF59.90
En stock  
+ −
6 mm Rear wheel hub
YOK-Z2-011R6A
entspricht: Z2-011R6
CHF12.50
En stock  
+ −
Alu Rear Weight H Arm Rot für RD2.0/SD2.0
YOK-Y2-R08RAW
CHF59.90
En stock  
+ −
Body Set (with Masking) Super Dog Fighter Works 91
YOK-YZ-101W1
CHF59.90
En stock  
+ −
Alu Shim 3x6x1.0mm (Black)
YOK-ZC-A3610BA
entspricht: ZC-A3610B
CHF5.90
En stock  
+ −
Aluminum Rear Hub Carrier Black für RD2.0/SD3.0
YOK-RD-415AR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
Aluminum Rear Hub Carrier Purple für RD2.0/SD3.0
YOK-RD-415ARP
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
J Concept YZ-4SF F2 Light weight
YOK-S4-101LW2A
entspricht: S4-101LW2
CHF32.90
En stock  
+ −
Aluminum Rear Hub Carrier Red für RD2.0/SD3.0
YOK-RD-415ARR
Aluminum rear hub carrier for RD/SD series. It is more rigid than the standard plastic one, and improves rear traction and slide control. Upper arm fixing positions allow for more precise adjustment of camber change due to suspension stroke. The lower suspension arm pins can also be selected from...
CHF59.90
En stock  
+ −
Main chassis for MR/RS
YOK-B2-002MR
 
CHF39.90
En stock  
+ −
Rear“X30”shock set
YOK-S4-S1LA
entspricht: S4-S1L
CHF69.90
En stock  
+ −
Universal shaft for YZ-2T
YOK-Z2-01075TA
entspricht: Z2-01075T
CHF39.90
En stock  
+ −
Alu High mount upper mount spacer
YOK-Y2-202USL
CHF39.90
En stock  
+ −
Program card for SP-02DV2/SP-03DV2 servo
YOK-SP-03DPC-1
This is a dedicated programmer that can be connected to programmable servos such as SP-02DV2/SP-03DV2 for drifting and rewrite settings. The main unit is powered from a USB connector, etc., and by connecting the servo cable directly, the power, torque, hunting suppression value,...
CHF34.90
En stock  
+ −
Aluminium / Graphite Servo Halterung für RS2.0
YOK-RS-203AS
This servo mount is a hybrid structure that enhances the steering response of the RS2.0. The stay connecting it to the chassis is made of aluminum, and a lightweight graphite plate is used on the upper side of the chassis to prevent excessive changes in the center of gravity. The servo itself is...
CHF39.90
En stock  
+ −
Graphite battery holder for MR/RS Midship
YOK-B2-118MA
 
CHF29.90
En stock  
+ −
Univ. Drive Shaft 49mm YD-2
YOK-Y2-010A
entspricht: Y2-010
CHF32.50
En stock  
+ −
Alu Front Susp.Mount for BD7 (Rear side 43.5mm)
YOK-B7-3135FR
the new block has increased steering response as well as
CHF23.90
En stock  
+ −
Lipo Bag Team Yokomo
YOK-YB-LSBB
Battery bag for charging and storing Li-po batteries. The flame-retardant material prevents the spread of fire in the unlikely event that the battery catches fire. It has a safe large capacity and can hold 6 short batteries, making it convenient for storage and transportation. Internal...
CHF23.90
En stock  
+ −
Graphite Front ST Hub Carieer BD9/BD10
YOK-B9-413GA
entspricht: B9-413G
CHF14.90
En stock  
+ −
Flex Gear Differential Oil(35cc) DOT1
YOK-CS-DOT1
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
En stock  
+ −
Steel front lower suspension mount for YZ-2CAL 3.1
YOK-Z2-300FLSA
entspricht: Z2-300FLS
CHF29.50
En stock  
+ −
Alu Rear Suspension Mount in Rear (w. S4-300BS)
YOK-Z2-300RR4A
entspricht: Z2-300RR4
CHF22.90
En stock  
+ −
Karosserie 1:10 FWD Type-A
YOK-SP-FWDABA
A polycarbonate FWD touring car body Type-A that matches the 1/10 size FWD touring car category held around the world. The wide overfender creates strength, and the short overhang and front nose spoiler provide high exercise performance. In addition, it is equipped with a large rear wing to...
MaterialLexan AuswahlhilfeFWD 1:10 Massstab1:10 EinsatzOn-Road Lackierungunlackiert
CHF57.90
En stock  
+ −
Alu Main Shaft (Anodized) YZ-4
YOK-Z4-644H
 
CHF8.90
En stock  
+ −
Gear Differential Set
YOK-B9-500GS
(38T)
CHF49.90
En stock  
+ −
Racing performer Rotor M4 D12.2 x d7.25 titan
YOK-RP-095A
entspricht: RP-095
CHF57.50
En stock  
+ −
Racing Performer Rotor M4 D12.5 x 7.25 titan
YOK-RP-096A
entspricht: RP-096
CHF57.50
En stock  
+ −
Bearing F5 x F10 x 4mm
YOK-BB-105-2A
entspricht: BB-105-2
CHF6.90
En stock  
+ −
Alu Transmission Case edge trimmed YD-4
YOK-Y4-302C
 
CHF114.90
En stock  
+ −
Alu Center Mount (Chamfer) YZ-4
YOK-Z4-304LC
 
CHF22.90
En stock  
+ −
SLF Aluminum Big Bore shock set for YD-2
YOK-Y2-SBBSA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
En stock  
+ −
Graphite Rear Shock Tower SO3.0
YOK-SO-018
CHF22.90
En stock  
+ −
Alu lightweight SP Steering Block RD/SD Red
YOK-Y2-415SAR
This is a color version of the Offset 0 steering block for the RD/SD series, which has been well-received for its neutral characteristics, and now comes in three new colors: blue, purple, and red to match the machine color. Compared to the standard plastic blocks, the aluminum version is much...
CHF37.90
En stock  
+ −
Front & Rear Shock Tower/Spacer YZ-4
YOK-Z4-017
 
CHF18.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF89.90
En stock  
+ −
Graphite Front Upper Arm YR-10U
YOK-YR-10U
CHF18.90
En stock  
+ −
Aluminum bulk head mount for YZ-2 series
YOK-Z2-018BMAA
entspricht: Z2-018BMA
CHF56.50
En stock  
+ −
YZ-4SF Light Wheigt Body (J-Concept)
YOK-S4-101LWA
entspricht: S4-101LW
CHF37.90
En stock  
+ −
Alu Chassis US Spec für BD12
YOK-B12-002AU
Aluminum main chassis for the BD12 competition touring car. It is a highly rigid US specification with little wall removal, making it ideal for high-grip carpeted surfaces. The center of gravity is lowered, which is also effective as a high-side countermeasure.
CHF112.90
En stock  
+ −
Alu Steering Bell Crank für 2WD Drift
YOK-D-163
 
CHF55.90
En stock  
+ −
Graphite Front Shock Tower YZ4-SF
YOK-S4-017A
entspricht: S4-017
CHF18.90
En stock  
+ −
Motor Mount für PCS
YOK-B8-302M2
 
CHF55.90
En stock  
+ −
YD-2/BD8 Brass Sus holder C (46.4~49.6mm)
YOK-TS-2151
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF27.90
En stock  
+ −
Alu steering hub carrier für YZ-4SF2
YOK-S4-41306A
An aluminum front steering hub carrier that further enhances the cornering performance of YZ-4SF2 on high grip road surfaces such as carpets or artificial grass. Comparing with standard caster angle (8 degrees), the caster angle of 6 degrees is specialized for high grip road surfaces....
CHF52.90
En stock  
+ −
Center Balance Weight
YOK-B9-BW50A
50g
CHF27.90
En stock  
+ −
Gear Differential Bevel Gear Set
YOK-BD-503G
 
CHF15.90
En stock  
+ −
3×6×2.0mm Alu Shim (8pcs·Black)
YOK-ZC-A3620BA
entspricht: ZC-A3620B
CHF5.90
En stock  
+ −
Chassis Platte BD12 Carbon
YOK-B12-002
CHF109.90
En stock  
+ −
Front susp. arm(TypeB/2hole/F3.5pin) for YZ-4SF2
YOK-S4-008F2A
entspricht: S4-008F2
CHF12.50
En stock  
+ −
Rear Double Joint Universal Shaft
YOK-BD-010RW
 
CHF54.90
En stock  
+ −
Rear toe control system for BD8-2018
YOK-B8-RTC18
CHF54.90
En stock  
+ −
MIP Puck Drive cup protector rebuild kit for YZ-2
YOK-Z2-17045
CHF54.90
En stock  
+ −
Front“X30”shock shaft (Titanium coat)
YOK-S4-S2STA
entspricht: S4-S2ST
CHF15.90
En stock  
+ −
Aluminum Front Bulkhead Bridge SD3.0
YOK-SD-302S3
CHF54.90
En stock  
+ −
Alu Front Suspension Mount for BD7 (FR 42.7mm)
YOK-B7-3127FR
the new block has increased steering response as well as
CHF21.90
En stock  
+ −
Karosseriehalter magnetisch vorne
YOK-Y2-016MGFA
It is a magnet type body mount that can stealth mount the body. Attach the magnet to the body with bracket + Shoe Goo, etc., and attach the steel adapter on the body post. The adapter has a slightly sliding structure that does not interfere with chassis flex.
CHF24.90
En stock  
+ −
Alu Front Suspension Mount (Rear/44.2mm)
YOK-B7-3142FR
This one piece designed aluminum suspension mount in 44.2mm for rear side at front suspension.
CHF21.90
En stock  
+ −
Graphite main chassis BD11
YOK-B11-002A
entspricht: B11-002
CHF109.00
En stock  
+ −
Aluminum Special Servo Mount
YOK-B7-203B
 
CHF39.90
En stock  
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (207)
Compatibilité
    Afficher tout (73)
Abmessungen
Auswahlhilfe
    Afficher tout (26)
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (46)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags