Français (CH)
ERSATZTEIL-FINDER

pièces de rechange

pièces de rechange

Trier par:
Recommandé
Montrer:
48
Front Double Joint Universal Driveshaft BD9/BD10
YOK-B9-010FWA
entspricht: B9-010FW
CHF 59.90
En stock  
+ −
RTC Separate Suspension mount (B)
YOK-B9-RTC-05A
entspricht: B9-RTC-05
CHF 32.90
En stock  
+ −
BD10F Front balance weight L / R 40g
YOK-B10-BWF40A
A front balance weight that enhances the traction of the BD10F. A total weight increase of 80g can be achieved with 40g each on the left and right, reducing wheel spin that tends to occur during acceleration. The acceleration from the corner will be improved and the time will be improved. By...
CHF 65.00
En stock  
+ −
3gear idler gear für CA
YOK-Z2-503ICA
entspricht: Z2-503IC
CHF 6.90
En stock  
+ −
Front double-joint universal BD11
YOK-B11-010FWA
entspricht: B11-010FW
CHF 64.90
En stock  
+ −
Alu Front upper A Arm YD-4
YOK-Y4-008FUC
 
CHF 47.90
En stock  
+ −
Front bulk head for YZ-2T
YOK-Z2-002BTA
entspricht: Z2-002BT
CHF 9.50
En stock  
+ −
Aluminum main chassis for YZ-2T
YOK-Z2-002TA
entspricht: Z2-002T
CHF 95.00
En stock  
+ −
Aluminum front short A arm set for YD-2 (Red/Bevel
YOK-Y2-R08FSCA
entspricht: Y2-R08FSC
CHF 69.90
En stock  
+ −
Carbon Graphite Main Chassis
YOK-B9-00219
CHF 95.00
En stock  
+ −
Narrow Graphite Main Chassis Set für YD-2R inline
YOK-Y2-002RXVA
This graphite chassis set is designed to further fine tune the YD-2R series for high rear traction. The overall silhouette has been slimmed down and rebalanced for rigidity, and the chassis has also been lightened for a more supple chassis twist. The roll motion softens the load on the...
CHF 189.90
En stock  
+ −
Front upper arm mount ”S” (Standard) for YZ-2 seri
YOK-Z2-300FUSA
entspricht: Z2-300FUS
CHF 25.90
En stock  
+ −
Alu main Chassis (Midship) YZ CAL2 / DTM2S
YOK-Z2-0023
CHF 94.90
En stock  
+ −
Front HD Double Joint Univ. Shaft
YOK-B7-010FW
 
CHF 62.90
En stock  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF 94.10
En stock  
+ −
Alu Offset Rear Hub Carrier 0 degree Set YZ4/Z2ca
YOK-Z2-415RS
This is intended for the variable set up for upper arm by replacement for several kind of track surface.
CHF 89.90
En stock  
+ −
Graphite Rear Shock Tower YD-4
YOK-Y4-018
 
CHF 22.90
En stock  
+ −
Main Chassis YZ-2
YOK-Z2-002
 
CHF 89.90
En stock  
+ −
Ceramic Kugellager 10x15x4mm 2stk.
YOK-BB-1510CBA
entspricht: BB-1510CB
CHF 16.90
En stock  
+ −
SLF Aluminum Big Bore shock set (Purple) for YD-2
YOK-Y2-SBBSPA
Super low friction aluminum big bore shock set for YD-2. The cylinder diameter is wider than the conventional shock, and the shock length is also newly designed for drifting. The maximum capacity for on-road shocks enhances the sense of stability. The cylinder is also treated with Kashima Coat...
CHF 89.90
En stock  
+ −
Réduction 50%
Réduction 50%
Racing Performer RPXII competition brushless ESC
YOK-BL-RPX2B
We are happy to inform our new premium ESC for 1/10 scale RC racing and drift competitors.   The new ESC is named as RPXII which has various new adjustable functions as well as latest   auto function at the same time.           ¦ Made with the highest grade FET and...
VerwendungRC Auto Motor / AntriebElektro Brushless-Motor HerstellerYokomo
CHF 149.00 CHF 299.90 -50%
En stock  
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF 89.90
En stock  
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF 89.90
En stock  
+ −
Type B, Front suspension arm
YOK-Z2-008F3A
F3 Outer pin spec
CHF 11.00
En stock  
+ −
Aluminum SLF Big Bore Shock Set Blue
YOK-Y2-SBBSBL
Super low friction aluminum big bore shock set in blue anodized aluminum color. The cylinder diameter is wider than conventional shocks and the shock length is newly designed for drifting. Large capacity and increased stability.
CHF 89.90
En stock  
+ −
Alu Front Steering Hub Carrier 12.5° YZ-4
YOK-Z4-413125A
 
CHF 59.90
En stock  
+ −
Front Lower Short A Arm YD2 YD4
YOK-Y2-008FSCA
Yokomo will release a new optional parts [Front lower short A arm] for more freedom on counter steering for existing customer who enjoy AWD and RWD drifting with YD-4 & YD-2 series in the end of this month, May 31st. Short Suspension Arm will be a kind of highlight at all the option...
CHF 64.90
En stock  
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF 59.90
En stock  
+ −
V4 Steering Gyro Blue Version
YOK-DPP-302V4BL
This is the blue version of the V3 Gyro, which is used by a high percentage of top drivers. Four modes are provided for different levels of operation, allowing you to select the level of interference with which the gyro will operate. Endponts can also be set for easy adjustment to your...
CHF 59.90
En stock  
+ −
Drift competition tire for carpet/P-tile DRC 4stk.
YOK-ZR-DRCA
For Carpet/Polished Tile These HDPE tires have a flatter surface compared to the asphalt variant. By increasing the contact patch these tires let you drift on carpet/polished tile with an increased sense of grip and driving performance
Auswahlhilfe190mm Touring, 200mm Touring MaterialDrift Reifen/Rad-TypReifen Massstab1:10 EinsatzOn-Road Drift
CHF 11.00
En stock  
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF 35.00
En stock  
+ −
Alu 15.5mm clamp Servo Horn 25T Futaba
YOK-Z2-20425A
entspricht: Z2-20425
CHF 16.90
En stock  
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF 34.90
En stock  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform. The system is a set of shaped brass plate that can be used in various ways according to the situation. It comes as a set of three with...
CHF 34.90
En stock  
+ −
Alu adjustable steering bell crunk set for YD-2
YOK-Y2-202VA
It is a variable aluminum steering bell crank that can be used in common with the YD - 2 series. Corresponding to the wide tread of the front which is the mainstream of recent RWD drift, we set the width of the tie rod pivot part of the center link right and left, and widely set the...
CHF 99.90
En stock  
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF 57.90
En stock  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF 42.90
En stock  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF 21.50
En stock  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF 42.90
En stock  
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF 85.50
En stock  
+ −
Lexanschere / Lexan Schere
YOK-YT-CS2A
entspricht: YT-CS2
CHF 15.90
En stock  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF 41.90
En stock  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF 20.50
En stock  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF 159.90
En stock  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF 16.90
En stock  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF 159.90
En stock  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF 79.90
En stock  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF 79.90
En stock  
+ −
Catégories
pièces de rechange
Pignions
Combo avec Controler
Matériaux de décoration
Carosseries
Accessoires de carrosserie
Accessoires pour des camions
Moteur
roue et pneu
Schablonen (Paint Masks)
Tuning
+6Plus
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (212)
Compatibilité
    Afficher tout (81)
Abmessungen
Auswahlhilfe
    Afficher tout (26)
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (46)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags