ERSATZTEIL-FINDER

Ersatzteile

Ordnen nach:
Empfohlen
48
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF8.50
Auf Lager  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF8.90
Auf Lager  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF41.90
Auf Lager  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF13.90
Auf Lager  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
Auf Lager  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
Auf Lager  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF12.20
Auf Lager  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
Auf Lager  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
Auf Lager  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF21.50
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF79.90
Auf Lager  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
Auf Lager  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout!
CHF44.90
Auf Lager  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
Auf Lager  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
Auf Lager  
+ −
Adjustable Rear Lower Short H Suspension Arm set
YOK-Y2-008RASA
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July.
CHF99.90
Auf Lager  
+ −
BD8/BD7'16 Gear Diff Unit
YOK-B8-500GS
 
CHF52.90
Auf Lager  
+ −
Yokomo Pit Mat 100x60cm
YOK-YT-PM26A
Yokomo's pit mat is ideal for pit work on circuits. With a width of 100 cm and a depth of 60 cm, the surface has a smooth satin-like feel, and the Yokomo Racing Factory print logo is placed large to create a competitive image. The back side is made of rubber material to prevent slippage...
CHF52.90
Auf Lager  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
YZ-2CA/DT/YZ-4 DP48 52T Ball differential kit
CHF49.90
Auf Lager  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
Auf Lager  
+ −
Motor mount
YOK-B7-32L15
 
CHF38.90
Auf Lager  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF19.90
Auf Lager  
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF77.00
Auf Lager  
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF21.90
Auf Lager  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF13.90
Auf Lager  
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF18.90
Auf Lager  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
Auf Lager  
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF74.90
Auf Lager  
+ −
Pandem Nissan Fairlady Z RZ34 1:10
YOK-SD-RZ34B
The new body Pandem Nissan Fairlady RZ34 for drifting is now available! The sharp nose and massive form create a powerful silhoutte and the Pandem Spoiler and aero parts create a massive atmosphere. The one-piece molded polycarbonate body easily creates a powerful body. A two-piece light...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF74.90
Auf Lager  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF11.50
Auf Lager  
+ −
COROLLA Axio apr GT Body Set
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
Auf Lager  
+ −
PANDEM 90 Light parts / Wing parts set
YOK-SD-PM90LWA
Light bracket parts and polycarbonate wing for the GR PANDEM 90 bodies are finally here! The fine details are made of high quality polycarbonate. The set comes with the following Headlight, taillight brackets and a 4-split rear wing.
CHF49.90
Auf Lager  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTBL
CHF49.90
Auf Lager  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF22.90
Auf Lager  
+ −
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF24.90
Auf Lager  
+ −
Body Set with Masking for YZ-870C
YOK-YZ-101
CHF49.60
Auf Lager  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF32.90
Auf Lager  
+ −
Competition Capacitor (Non-Polarity)
YOK-BL-RCPA
entspricht: BL-RCP
CHF49.60
Auf Lager  
+ −
Alu C-hub Carrier for RTC (BD8 und BD7)
YOK-B8-RTC-15
The new C-hub carrier is made by high quality aluminum made and designed with new cantilever type for more light weight while having sufficient strength.
CHF47.90
Auf Lager  
+ −
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF14.90
Auf Lager  
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
Auf Lager  
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF46.90
Auf Lager  
+ −
Rear short ”X30” shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
Auf Lager  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
Auf Lager  
+ −
YD-2/BD8 Brass Sus holder B (43.5~46.7mm)
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
YD-2 Aluminum UL Front Axle (adjustable range 5mm~
YOK-Y2-010FHA
YD-2 Aluminum UL Front Axle (adjustable range 5mm~9mm)
CHF25.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (205)
Passend zu...
    Alle zeigen (73)
Abmessungen
Auswahlhilfe
    Alle zeigen (26)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
    Alle zeigen (11)
Marke
    Alle zeigen (46)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags