ERSATZTEIL-FINDER

Ersatzteile

Ordnen nach:
Empfohlen
96
Graphite Main Chassis (2.4mm) for SD2.0
YOK-Y2-002S2
CHF109.00
Auf Lager  
+ −
Alum.Shock set for RO1.0
YOK-Z2-S1SS
CHF109.00
Auf Lager  
+ −
Front susp. arm(TypeB/2hole/F3.5pin) for YZ-4SF2
YOK-S4-008F2A
entspricht: S4-008F2
CHF12.50
Auf Lager  
+ −
Front W/J Universal Assy. (Bearing type/1pcs.)
YOK-MS-010FW
CHF35.90
Auf Lager  
+ −
Yokomo Werkzeugset 1.5/2.0mm Imbus 5.5/7mm Stecksc
YOK-YT-YRTSBA
entspricht: YT-YRTSB
CHF26.90
Auf Lager  
+ −
Front“X30”shock shaft (Titanium coat)
YOK-S4-S2STA
entspricht: S4-S2ST
CHF15.90
Nicht auf Lager
Aluminum Separate Suspension Mount (43.9mm)
YOK-B7-3139BS
 
CHF17.90
Auf Lager  
+ −
Motor mount 2016
YOK-B7-32L16
 
CHF52.90
Auf Lager  
+ −
Karosseriehalter magnetisch vorne
YOK-Y2-016MGFA
It is a magnet type body mount that can stealth mount the body. Attach the magnet to the body with bracket + Shoe Goo, etc., and attach the steel adapter on the body post. The adapter has a slightly sliding structure that does not interfere with chassis flex.
CHF24.90
Auf Lager  
+ −
Front "A" Arm Conv. for YD-4/YD-4MR
YOK-Y4-AAC
 
CHF52.90
Auf Lager  
+ −
MIP Puck Aluminum outdrive cups for YZ-2 Stock ver
YOK-Z2-17132
CHF52.90
Auf Lager  
+ −
Aluminum Special Servo Mount
YOK-B7-203B
 
CHF39.90
Auf Lager  
+ −
Integrated lightweight bulkhead for YD-2 purple
YOK-Y2-302DPLA
This is a front integrated bulkhead made of aluminum that can be used commonly with the YD-2 series. Of course, it is available in three anodized colors: black, red and purple. As with the previous parts, this part can greatly increase the strength of the front end, but it...
CHF52.90
Auf Lager  
+ −
Pandem Nissan Fairlady Z RZ34 LED Light Set
YOK-SD-RZ34L
CHF52.90
Auf Lager  
+ −
J Concept F2 Truck body for YZ-2T
YOK-Z2-101TA
entspricht: Z2-101T
AuswahlhilfeTruck Massstab1:10 EinsatzOff-Road Lackierungunlackiert HerstellerYokomo
CHF57.50
Auf Lager  
+ −
Front Belt Tensioner Set black
YOK-B7-FBTS16
 
CHF21.00
Auf Lager  
+ −
Black Alum. Separate Sus. Mount (42.7mm)
YOK-B7-3127BS
 
CHF21.00
Auf Lager  
+ −
Front Universal Shaft 77mm Bone YZ4-SF
YOK-S4-01077A
entspricht: S4-01077
CHF36.90
Auf Lager  
+ −
YZ-2CAL3.1 Hard main chassis (High grip surface/Lo
YOK-Z2-002C31A
entspricht: Z2-002C31
CHF105.00
Auf Lager  
+ −
YZ-2DTM3.1 Hard main chassis (Dirt surface/Long ve
YOK-Z2-002D31A
entspricht: Z2-002D31
CHF105.00
Auf Lager  
+ −
Front & rear brake disk caliper set for YD-2 serie
YOK-Y2-415CPA
Yokomo will be releasing a new series of exterior parts for the YD-2, which will be a Brake discs and Calipers set.
CHF42.90
Auf Lager  
+ −
B-MAX4II Main Chassis (Li-po Battery Correspond)
YOK-BM-002L
 
CHF34.90
Auf Lager  
+ −
Aluminium Rear Susp. Mount (Rear/S4ARm) YZ-4
YOK-Z4-300SRR
 
CHF34.90
Auf Lager  
+ −
Plastic molded X shock cap
YOK-BM-S812RA
 
CHF6.50
Auf Lager  
+ −
Graphite front shock towers BD11
YOK-B11-017A
entspricht: B11-017
CHF25.90
Auf Lager  
+ −
Aluminum rear brace support YD2
YOK-Y2-303ARA
entspricht: Y2-303AR
CHF26.90
Auf Lager  
+ −
MO2.0 Body Shell w/Mask. (LW) for MO Series
YOK-MO-101LW
CHF25.90
Auf Lager  
+ −
Yokomo 05R Stock Motor
YOK-YM-05R
CHF34.20
Auf Lager  
+ −
Clear lexan front wing (Wide/Narrow) for YZ-2
YOK-Z2-107FWA
entspricht: Z2-107FW
CHF8.90
Auf Lager  
+ −
Upper Suspension Arm Mount (Left & Right)
YOK-B4-300UM
 
CHF33.50
Auf Lager  
+ −
Hex Socket Rod End Ball (M size / 12.8mm length)
YOK-ZC-206MHA
entspricht: ZC-206MH
CHF6.90
Auf Lager  
+ −
Alu adjustable rear short H arm for YD-2 (purple)
YOK-Y2-P08RASA
entspricht: Y2-P08RAS
CHF99.90
Auf Lager  
+ −
Aluminum front shock tower for YD-2 EX
YOK-Y2-017AFEA
 
CHF49.90
Auf Lager  
+ −
Graphite Main Chassis SD3.0
YOK-SD-002S3
CHF99.90
Auf Lager  
+ −
Gear Differential Unit
YOK-B7-500GS
CHF49.90
Auf Lager  
+ −
Gear differential drive cup (Steel) for MR/RS
YOK-B2-501GSA
entspricht: B2-501GS
CHF13.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.8/Blue)
YOK-IB-FCD18
 
CHF49.90
Auf Lager  
+ −
Karosserie GT300 HasePro Prius GT
YOK-GT-AHPBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
Auf Lager  
+ −
Front/Rear Body Mount YD-4
YOK-Y4-016A
entspricht: Y4-016
CHF7.50
Auf Lager  
+ −
Gear Diff Unit (with Input Shaft) YD-4
YOK-Y4-503
 
CHF49.90
Auf Lager  
+ −
BD8/BD7 Titanium Turnbuckle Set (9pcs)
YOK-B8-TBS
CHF49.90
Auf Lager  
+ −
Yokomo Factory team Hoody (S size)
YOK-ZC-P26S
CHF49.90
Auf Lager  
+ −
Titanium turn buckle set for YZ-4SF2
YOK-S4-TBS2A
entspricht: S4-TBS2
CHF49.90
Auf Lager  
+ −
LC Transmission Case for YZ-2 Series
YOK-Z2-302TLCA
Yokomo is excited to release our New LC (Laydown/Carpet) Transmission Case for Carpet, Astro, and hi-traction Dirt surfaces made specially for our YZ-2 series of vehicles.
CHF12.90
Auf Lager  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTR
CHF49.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier for MO1.0/2.0
YOK-MO-415RA
Aluminum rear hub carrier for MO series. Previously sold as a set with upper arm mounts, the hub carrier part is now sold separately. The rigidity of the axle area is greatly increased, which improves stability during cornering, jump landings, and other situations where a large load is placed on...
CHF49.90
Auf Lager  
+ −
RP Driftfelge High Tract.(6mm Offset) titan 1paar
YOK-RP-6313T6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand.
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF9.50
Auf Lager  
+ −
Bulk Head B (Front Right/Rear Left·Black)
YOK-B7-302C15
 
CHF24.90
Auf Lager  
+ −
Alminum Suspension mount (43.9mm·Black)
YOK-B7-3139B
 
CHF19.90
Auf Lager  
+ −
Battery holder/Radio tray/Spur gear cover for YZ-2
YOK-Z2-118TA
entspricht: Z2-118T
CHF21.50
Auf Lager  
+ −
Alminum Suspension mount (46.4mm·Black)
YOK-B7-3164B
 
CHF19.90
Auf Lager  
+ −
Sparen Sie 49%
Sparen Sie 49%
YD-2S Plus Conversion Kit
YOK-Y2-YD2SC
This new conversion is intended for the customer who would consider to upgrade for High Mount Motor spec like YD-2S Plus.
CHF195.00 CHF99.00
Sie sparen: CHF96.00
Auf Lager  
+ −
Graphite Main Chassis MS1.0
YOK-MS-002
CHF99.00
Auf Lager  
+ −
f4.8 Ball end cap BD9/BD10
YOK-B9-207A
(Hard)
CHF15.50
Auf Lager  
+ −
3gear Box Set für CA (Carpet Astroturf)
YOK-Z2-302C3
 
CHF32.90
Auf Lager  
+ −
Rear Anti Roll Bar "hard" set YZ-2 new arm compat.
YOK-Z2-412RH2
CHF32.90
Auf Lager  
+ −
Alu adjustable suspension mount set for YD-2 red
YOK-Y2-301ARA
entspricht: Y2-301AR
CHF92.50
Auf Lager  
+ −
Aluminum frame 30mm cooling fan (purple)
YOK-D-CFPA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF32.90
Auf Lager  
+ −
Rear shock shaft for YZ-2 V3 Titanium coat
YOK-Z2-S2LTA
entspricht: Z2-S2LT
CHF14.90
Auf Lager  
+ −
Aluminum frame 30mm cooling fan (Red)
YOK-D-CFRA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF32.90
Auf Lager  
+ −
Aluminum Front Solid Axle for RS1.0/RS2.0
YOK-RS-501S
A new solid axle kit has been long awaited by RS riders looking to improve their times! Lighter than a standard geared differential, it eliminates unnecessary differential operation, resulting in a more stable ride. It is particularly effective on high grip surfaces such as carpet, providing...
CHF32.90
Auf Lager  
+ −
Alu Steering Bell Crank L/R YZ4-SF
YOK-S4-200AA
entspricht: S4-200A
CHF45.90
Auf Lager  
+ −
Aluminum Rear Hub Carrier (3mm Pin) CAL3/DTM3
YOK-Z2-415RS2A
entspricht: Z2-415RS2
CHF97.90
Auf Lager  
+ −
Universal shaft 66.5mm bone
YOK-Z2-010-65
 
CHF32.50
Auf Lager  
+ −
Rear Wheel Hub
YOK-B4-011RA
entspricht: B4-011R
CHF9.90
Auf Lager  
+ −
30mm Fan Shroud SO3.0
YOK-SO-FSS30
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF13.90
Auf Lager  
+ −
30mm Fan Shroud SO2.0
YOK-SO-FSS20
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF13.90
Auf Lager  
+ −
Steering bell crank (with bearing) for BD8-2018
YOK-B8-202SS
CHF63.90
Auf Lager  
+ −
Front One-Way Assy (for Right Side Belt/Red)
YOK-BR-640W
 
CHF47.90
Auf Lager  
+ −
Full counter solid axle set (Rear×2.0/Blue)
YOK-IB-FCD20
 
CHF47.90
Auf Lager  
+ −
Ventilated Slipper Plate YZ-2/B-Max2
YOK-Z2-670VPA
entspricht: Z2-670VP
CHF14.90
Auf Lager  
+ −
B-MAX4III Alu Steering Hub Carrier (15 degrees)
YOK-B4-413A15
 
CHF47.90
Auf Lager  
+ −
MIP Pucks Aluminum diff ring hub for YZ-2 Stock ve
YOK-Z2-18842
CHF47.90
Auf Lager  
+ −
Gokuraku Offroad Wing (Narrow size)
YOK-ZS-GWBNA
entspricht: ZS-GWBN
CHF9.90
Auf Lager  
+ −
YD-2 Aluminum Integral Front bulkhead
YOK-Y2-302D
Yokomo's new Integral aluminum front bulkhead was made to fit our very popular YD2 series of cars. This new bulkhead greatly helps improves the assembly accuracy in the front end of the car. Comparing to the standard bulkhead, this new bulkhead also helps provide a better steering feel...
CHF47.90
Auf Lager  
+ −
Lexus RC GT3 Clear Body for Touring Car
YOK-SP-LFGT3B
This real scale body fits just right for 190mm wide touring cars, and is a scale-down version of the LEXUS RCF GT3, complete with wing and decals,all officially approved by Toyota. The massive form and large rear wing provide a highly stable driving feel. It is also compatible with the...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road, On-Road Drift Lackierungunlackiert
CHF47.90
Auf Lager  
+ −
Front shock shaft for YZ-2 V3 Titanium coat
YOK-Z2-S2STA
entspricht: Z2-S2ST
CHF13.90
Auf Lager  
+ −
BD-10 Separate Rear Suspension Mount (Front (Brass)
YOK-B10-301SBA
entspricht: B10-301SB
CHF31.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Graphite
YOK-Z2-008R3GH
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves...
CHF23.90
Auf Lager  
+ −
5mm spacer shimm (0.05mm·0.1mm·0.2mm)
YOK-ZC-S50SA
entspricht: ZC-S50S
CHF6.90
Auf Lager  
+ −
Alu Main Pulley w/Drive Plate YZ-4
YOK-Z4-630M
CHF11.90
Auf Lager  
+ −
Grade up conversion 1 for YD-2
YOK-Y2-GC2A
entspricht: Y2-GC2
CHF95.00
Auf Lager  
+ −
Front & Undertray diffuser set for YD-2 /4 series
YOK-Y2-001BDA
Greatly improve the front grip and turning performance of the chassis when entering a corner or
CHF19.90
Auf Lager  
+ −
Graphite Front Lower Arm YR-10L
YOK-YR-10L
CHF18.90
Auf Lager  
+ −
Rear motor conversion kit for YD-2 series
YOK-Y2-RMCA
Introducing the ultimate option for increasing rear traction and speed!
CHF47.90
Auf Lager  
+ −
Aluminum main chassis for YRX-12
YOK-YX-02A
High quality, top range aluminum material has been selected for more rigid with 2.0mm thick main chassis and rear brace.
CHF94.50
Auf Lager  
+ −
Short Shock Set for MS1.0
YOK-MS-SSS
These short Aluminum Shocks are used in the MS1.0 standard. The Shock length is set to match the latest touring cars to lower the center of gravity as much as possible. The lower spring bearing is fitted with a bearing to release torsion of the coil spring during stroke and bring out neutral...
CHF94.10
Auf Lager  
+ −
Graphite front shock tower for YZ-2DTM3/CAL3
YOK-Z2-017-3A
3mm Lowered
CHF15.90
Auf Lager  
+ −
Alum. Short Shock Conversion Set for RS1.0
YOK-RS-SSC
New Short Shock Conversion Kit is now available to further improve the performance of the RookieSpeed RS1.0 to racing specs. This set of carbon shock towers and aluminum short shocks provide a sharp ride with minimal roll. The shock length has been shortened by more than 7mm to achieve an...
CHF94.10
Auf Lager  
+ −
Hard Main Chassis(CG) for BD8-2018
YOK-B8-00218H
2.5mm Carbon Graphite Hard Main Chassis has launched for the race at high grip surface condition.
CHF92.90
Auf Lager  
+ −
L5/LD Rear suspension arm(TypeB/F3.5pin) YZ-4SF2
YOK-S4-008R5BA
entspricht: S4-008R5B
CHF11.90
Auf Lager  
+ −
Battery Plate (CG) YZ-4
YOK-Z4-118P
 
CHF18.50
Auf Lager  
+ −
Alu Adjust. Susp. Mount Set YD2 (Purple/Bevel edge
YOK-Y2-301APA
entspricht: Y2-301AP
CHF92.50
Auf Lager  
+ −
Steering Block BD9/BD10
YOK-B9-415SA
entspricht: B9-415S
CHF11.50
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413H3A
entspricht: Z2-413H3
CHF11.90
Auf Lager  
+ −
Alu Hight mount front shock Tower
YOK-Y2-017AFL
CHF45.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (205)
Passend zu...
    Alle zeigen (73)
Abmessungen
Auswahlhilfe
    Alle zeigen (26)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
    Alle zeigen (11)
Marke
    Alle zeigen (46)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags