ERSATZTEIL-FINDER

pièces de rechange

pièces de rechange

Trier par:
Recommandé
48
Rear C Clip Universal BD9/BD10
YOK-B9-010RAA
(44.5mm Aluminum bone)
CHF49.90
En stock  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
En stock  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
En stock  
+ −
Lexanschere / Lexan Schere 160mm
YOK-YT-CS1A
Lexanschere Fluorine processing Scissor 160mm
CHF16.90
En stock  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
En stock  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
En stock  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
En stock  
+ −
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF8.50
En stock  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF79.90
En stock  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
En stock  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF13.90
En stock  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
En stock  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
En stock  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF12.20
En stock  
+ −
BD8/BD7'16 Gear Diff Unit
YOK-B8-500GS
 
CHF52.90
En stock  
+ −
Yokomo Pit Mat 100x60cm
YOK-YT-PM26A
Yokomo's pit mat is ideal for pit work on circuits. With a width of 100 cm and a depth of 60 cm, the surface has a smooth satin-like feel, and the Yokomo Racing Factory print logo is placed large to create a competitive image. The back side is made of rubber material to prevent slippage...
CHF52.90
En stock  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF21.50
En stock  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
En stock  
+ −
Motor mount
YOK-B7-32L15
 
CHF38.90
En stock  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout! ¦ The front springs are wound with a high pitch, the short high response spring is suitable for the high traction YD-2 series. Increasing the front...
CHF44.90
En stock  
+ −
Rear Universal Set (Bearing type)
YOK-MS-010RS
Universal Design with bearings mounted on the dogbones to reduce sliding resistance with the joint axle to the upmost limit. This reduces drive loss and stabilizes suspension operation, thereby increasing cornering speed.
CHF77.00
En stock  
+ −
Alminum Suspension mount (44.9mm·Black)
YOK-B7-3149B
 
CHF21.90
En stock  
+ −
Adjustable Rear Lower Short H Suspension Arm set
YOK-Y2-008RASA
The new aluminum adjustable rear lower H arm, which you can apply to the conventional YD-2 / YD- 4 series,will be released at the end of July. For the installation Y-2-301D2, Y2-301E2 (Alu rear sus mount) and B8-301BS(Bush) will be essential. But except for YD-2EXII users By...
CHF99.90
En stock  
+ −
Front brace for YZ-4 Narrow type
YOK-Z4-300FB2
 
CHF13.90
En stock  
+ −
Bellcrank /17mm horn/ Servo mount YZ-4
YOK-Z4-200
CHF18.90
En stock  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
 
CHF49.90
En stock  
+ −
Alu Suspension Mount Set F/R YD-4
YOK-Y4-301AS
 
CHF74.90
En stock  
+ −
Pandem Nissan Fairlady Z RZ34 1:10
YOK-SD-RZ34B
The new body Pandem Nissan Fairlady RZ34 for drifting is now available! The sharp nose and massive form create a powerful silhoutte and the Pandem Spoiler and aero parts create a massive atmosphere. The one-piece molded polycarbonate body easily creates a powerful body. A two-piece light...
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF74.90
En stock  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF19.90
En stock  
+ −
COROLLA Axio apr GT Body Set
YOK-GT-CAXBS
MaterialLexan Auswahlhilfe1:12 Massstab1:12 EinsatzOn-Road Lackierungunlackiert
CHF49.90
En stock  
+ −
PANDEM 90 Light parts / Wing parts set
YOK-SD-PM90LWA
Light bracket parts and polycarbonate wing for the GR PANDEM 90 bodies are finally here! The fine details are made of high quality polycarbonate. The set comes with the following Headlight, taillight brackets and a 4-split rear wing.
CHF49.90
En stock  
+ −
Front Lower Short T Arm für RD / SD Reihe
YOK-Y2-008FTBL
CHF49.90
En stock  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
En stock  
+ −
O Ring cap/AJ Nut/Shock Cap Nut/AJO Ring
YOK-B9-S4C
CHF24.90
En stock  
+ −
Body Set with Masking for YZ-870C
YOK-YZ-101
CHF49.60
En stock  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
En stock  
+ −
Competition Capacitor (Non-Polarity)
YOK-BL-RCPA
entspricht: BL-RCP
CHF49.60
En stock  
+ −
Alu C-hub Carrier for RTC (BD8 und BD7)
YOK-B8-RTC-15
The new C-hub carrier is made by high quality aluminum made and designed with new cantilever type for more light weight while having sufficient strength.
CHF47.90
En stock  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF11.50
En stock  
+ −
Brass Rear H Arm Weight Base (20g)
YOK-Y2-008RW20
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF47.90
En stock  
+ −
Alu Rear upper Arm mount YZ-2
YOK-Z2-300RUW
 
CHF46.90
En stock  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF22.90
En stock  
+ −
Rear short ”X30” shock set for YZ-2DTM3/CAL3
YOK-S4-S1MA
A shock set that can be used for the rear of YZ-2DTM3/CAL3 and the front of YZ-2T. The shaft diameter is F3.0mm, which is thinner than the standard F3.3mm, and it is possible to reduce friction and increase the shock absorption effect.
CHF69.90
En stock  
+ −
YD-2/BD8 Brass Sus holder B (43.5~46.7mm)
YOK-TS-2150
Please be announced the new items made by brass for BD-8 and YD-2 series. This new suspension holder has released under Team Suzuki brand. It is the same shape but made by brass for gaining more weight to be functioned as vehicle weight balance items. By replacing with the standard...
CHF27.90
En stock  
+ −
Aluminum Separate Suspension Mount (43.5mm)
YOK-B7-3135BS
 
CHF19.90
En stock  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF32.90
En stock  
+ −
Gear Diff 40T Ring Gear (for S4-503D16) YZ4-SF
YOK-S4-503R16A
entspricht: S4-503R16
CHF34.50
En stock  
+ −
HVF Shock shaft (19.1mm/Heavy fluorine coat) BD9
YOK-B9-S5SHVFA
entspricht: B9-S5SHVF
CHF27.50
En stock  
+ −
Catégories
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (205)
Compatibilité
    Afficher tout (73)
Abmessungen
Auswahlhilfe
    Afficher tout (26)
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF479
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
    Afficher tout (11)
Marke
    Afficher tout (46)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags