ERSATZTEIL-FINDER

Ersatzteile

Ordnen nach:
Empfohlen
96
Aluminum Rear Hub Carrier L/R for SO Series
YOK-SO-415RA
CHF45.90
Auf Lager  
+ −
Front suspension arm for YZ-2T
YOK-Z2-008FTA
entspricht: Z2-008FT
CHF14.00
Auf Lager  
+ −
Upper Deck for B7-FMC
YOK-B7-00315
 
CHF22.90
Auf Lager  
+ −
Suspension Mount messing 44.2mm 12.4gr.
YOK-B7-3142FRB
Brass -1mm lower front suspension mount (Rear side 44.2mm·12.4g)
CHF22.90
Auf Lager  
+ −
Front“X30”shock set
YOK-S4-S1SA
entspricht: S4-S1S
CHF69.90
Auf Lager  
+ −
Clump Wheel Hub (5.0mm·Black)
YOK-BD-011CBA
entspricht: BD-011CB
CHF12.90
Auf Lager  
+ −
Stabi Set (werden 2x für 1 Fahrzeug benötigt) YZ-4
YOK-Z4-412
CHF22.50
Auf Lager  
+ −
Ceramic Kugellager 5x10x4mm 2stk.
YOK-BB-1050CBA
entspricht: BB-1050CB
CHF13.90
Auf Lager  
+ −
Front Susp. Mount messing (rear side 43.5mm 12.2gr)
YOK-B7-3135FRB
 
CHF22.50
Auf Lager  
+ −
Sparen Sie 50%
Sparen Sie 50%
BL-EP6 Brushless speed controller (programmer incl
YOK-BL-EP6A
It is a brushless speed controller that comes with a programmer and realizes a reasonable price while supporting each category of on, off, and drift. In addition to Yokomo's sensor-type brushless motors, it is also possible to drive general-purpose sensorless motors. Of course, it is recommended...
CHF89.90 CHF45.00
Sie sparen: CHF44.90
Auf Lager  
+ −
HD f5.5mm Rod end ball (Screw 6mm long/4pcs) for Y
YOK-Z2-206-6A
entspricht: Z2-206-6
CHF6.90
Auf Lager  
+ −
Main chassis (Hard alumite) for YZ-4SF2
YOK-S4-002S2A
entspricht: S4-002S2
CHF89.90
Auf Lager  
+ −
Graphite front shock tower(Gull type)
YOK-Z2-017GA
 
CHF16.50
Auf Lager  
+ −
Light weight slide rack für YD-2Z
YOK-Y2-202SZA
A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
CHF89.90
Auf Lager  
+ −
Full counter solid axle set (Rear×1.8/Red)
YOK-IB-FCD18R
 
CHF44.90
Auf Lager  
+ −
Slipper Pad
YOK-B2-670CA
entspricht: B2-670C
CHF8.90
Auf Lager  
+ −
Rotor Magnet D12.3xd5.00 M3 Motor
YOK-RP-058
 
CHF44.90
Auf Lager  
+ −
Graphite Bumper für YD-2
YOK-Y2-001GBA
entspricht: Y2-001GB
CHF44.90
Auf Lager  
+ −
HD f5.5mm Rod end ball (Screw 8mm long/4pcs) for Y
YOK-Z2-206-8A
entspricht: Z2-206-8
CHF6.90
Auf Lager  
+ −
Messing Front Gewicht L/R 35gr. für BDFWD/BD10F
YOK-B10-BWF35
This front weight effectively increases the front traction of FWD cars. Made of black coated brass, weighing approx. 35g per side or approx. 70g on both sides, they can be screwed on for both BDFWD and BD10F, so there is no need to worry about them falling off while driving or in a...
CHF44.90
Auf Lager  
+ −
Shock Body
YOK-B9-S4S
CHF29.90
Auf Lager  
+ −
B-MAX2MR/RS Light weight body
YOK-B2-101MRL
 
AuswahlhilfeBuggy Massstab1:10 EinsatzOff-Road HerstellerYokomo MarkeDiverse Marken
CHF26.90
Auf Lager  
+ −
BD-10 Cross Plate (Cross Plate Post
YOK-B10-118CPA
entspricht: B10-118CP
CHF29.90
Auf Lager  
+ −
3-pad Slipper Set für YZ-2
YOK-Z2-670C3
This is a set of additional parts to convert the YZ-2 series slipper system to a 3-pad system. The effect is smoother than that of the standard 2-pad system, and allows for more delicate adjustment. This improves driving stability, especially on high-grip surfaces, and reduces the...
CHF29.90
Auf Lager  
+ −
Suspension Mount Bushings YZ4-SF
YOK-S4-300BSA
entspricht: S4-300BS
CHF13.90
Auf Lager  
+ −
LCG short Li-po enabled Graphite Battery Holder
YOK-B10-118G1A
entspricht: B10-118G1
CHF87.90
Auf Lager  
+ −
Rear Shock Tower 2016
YOK-B7-01816
 
CHF21.90
Auf Lager  
+ −
Shock End Plastic Parts (S/M/L size) YZ-2DTM/YZ-4
YOK-Z2-S6MA
 
CHF7.90
Auf Lager  
+ −
Suspension Mount messing 44.9mm 13.3gr.
YOK-B7-3149BB
Brass -1mm lower suspension mount (44.9mm·13.3g)
CHF21.90
Auf Lager  
+ −
Center Balance Weight
YOK-B9-BW30A
30g
CHF21.90
Auf Lager  
+ −
High Grade Ball Differential Grease
YOK-CS-HDLA
 
CHF11.50
Auf Lager  
+ −
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub
YOK-B10-WHAS1A
BD-919/BD10/BD10LC Axle/Spacer for AXON Super Hub Axle
CHF21.90
Auf Lager  
+ −
Rear Roll Damper Mount (Left) YR-22L
YOK-YR-22L
 
CHF17.50
Auf Lager  
+ −
Spool Drive Cup BD9/BD10
YOK-B9-501MCAA
(Aluminum made)
CHF24.90
Auf Lager  
+ −
Rear Lower Suspension Arm 39.5mm Extra Hard BD-8
YOK-BD-008RE1
This is intended for increasing the steering response in order to increase the cornering speed at high grip surface condition.
CHF12.50
Auf Lager  
+ −
Aluminum steering belcrunk
YOK-Z2-201BA
 
CHF28.90
Auf Lager  
+ −
Rear hard stabilizer set for YZ-2/4
YOK-Z2-412RH
 
CHF29.90
Auf Lager  
+ −
YD-4 Solid/One Way FCD Gear Set (Front x 0.59)
YOK-Y4-64359
 
CHF28.90
Auf Lager  
+ −
Aluminum Servo Mount SO3.0
YOK-SO-203
CHF28.90
Auf Lager  
+ −
Front Stabi Set YZ2 6stk.(New arm compatible/6 bar
YOK-Z2-412F3A
entspricht: Z2-412F3
CHF25.90
Auf Lager  
+ −
Graphite Rear Axle for World conversion
YOK-R12-24SN
 
CHF42.90
Auf Lager  
+ −
Titanium turn buckle set for YZ-2DTM3
YOK-Z2-TBSD3A
with Wrench
CHF42.90
Auf Lager  
+ −
Aluminum Wing Stay (Black)
YOK-D-057MA
entspricht: D-057M
CHF12.90
Auf Lager  
+ −
Rear ESC mount for YD-2 series (Purple)
YOK-Y2-REM-PA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
Auf Lager  
+ −
Rear ESC mount for YD-2 series
YOK-Y2-REM-RA
A ESC mount set that can change the weight balance of the chassis by mounting the ESC on the rear overhang and greatly enhance the rear traction. Especially effective on roads with low grip, the load applied to the rear tires at the corner exit is overwhelming! It is possible to get a...
CHF42.90
Auf Lager  
+ −
Titanium coat shock shaft YD-4
YOK-Y4-S5TA
entspricht: Y4-S5T
CHF21.50
Auf Lager  
+ −
Aluminum suspension mount set for RD2.0
YOK-RD-301AS
This aluminum suspension mount set for RD2.0 further enhances driving performance. The B width for the front is 43.5mm standard, and the D width for the rear is 57.2mm standard for both the front and rear sides, but the suspension pin width can be fine-tuned by changing the suspension mount...
CHF85.50
Auf Lager  
+ −
Aluminum center mount for BD10F
YOK-B10-302CMA
entspricht: B10-302CM
CHF84.90
Auf Lager  
+ −
Karosserie GReedy R35 Spec D ohne Decals 1:10
YOK-SD-GR35BA
entspricht: SD-GR35B
MaterialLexan Auswahlhilfe190mm Touring Massstab1:10 EinsatzOn-Road Drift Lackierungunlackiert
CHF54.90
Auf Lager  
+ −
Alum.Main Chassis for MO Series
YOK-MO-002
CHF84.90
Auf Lager  
+ −
Aluminum Separate Suspension Mount (44.2mm)
YOK-B7-30142
 
CHF16.90
Auf Lager  
+ −
3×6×0.5mm Alu Shim (8pcs·Black)
YOK-ZC-A3605BA
entspricht: ZC-A3605B
CHF5.90
Auf Lager  
+ −
Brass Rear H Arm Weight A (10g)
YOK-Y2-008RW10
This optional part for the RD2.0/SD2.0 combines an aluminum rear H-arm with a brass weight to systematically increase rear traction. By mounting the weight on the rigid aluminum H-arm, the unsprung weight, which is directly loaded on the rear tires, is increased, effectively increasing tire...
CHF41.90
Auf Lager  
+ −
Turnbucke Upper Arm Set for MS1.0
YOK-MS-008T
This is a turnbuckle adjustable upper arm set that makes the most of the MS1.0's greatest feature, the linkage-type upper A-arm. This single set of front and rear upper arms allows for camber changes as well as fine caster angle adjustments.
CHF41.90
Auf Lager  
+ −
Graphite Battery Holder Set for YD-2 Series
YOK-Y2-118CG2A
The graphite battery holder for the YD-2 series has a new design. The graphite plate has been delicately cut to reduce weight, making it a perfect match for high traction chassis. The graphite plate has been delicately cut to reduce weight, making it ideal for use with high...
CHF75.90
Nicht auf Lager
YD-2/BD8 Brass Sus holder A (39.5~42.7mm)
YOK-TS-2149
Please be announced the new items made by brass for BD-8 and YD-2 series.
CHF27.90
Auf Lager  
+ −
Aluminum Center Link BD9/BD10
YOK-B9-201LBAA
including Ball bearing
CHF27.90
Auf Lager  
+ −
DP48/84T SpurGear of Dual Pad forB-YZ4S
YOK-S4-SG84DA
entspricht: S4-SG84D
CHF6.50
Auf Lager  
+ −
BD-10 Rear stabilizer wire set  (f (f1.1/1.2/1.3mm)
YOK-B10-412RWA
entspricht: B10-412RW
CHF27.90
Auf Lager  
+ −
Aluminium Motor Plate SO3.0
YOK-SO-304
CHF27.90
Auf Lager  
+ −
Front Steering Hub Carrier 8degrees YZ4-SF
YOK-S4-413-8A
entspricht: S4-413-8
CHF9.90
Auf Lager  
+ −
Rear stabilizer wire set for B-MAX4III
YOK-B4-412RW
 
CHF13.90
Auf Lager  
+ −
RTC Graphite molded rear suspension arm for BD10/9
YOK-B10-RTC-1A
entspricht: B10-RTC-1
CHF13.90
Auf Lager  
+ −
Aluminum top shaft for YZ-2DTM3/CAL3
YOK-Z2-303TA3A
For Z2-670S
CHF17.90
Auf Lager  
+ −
30mm Fan Shroud SO2.0
YOK-SO-FSS20
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF13.90
Auf Lager  
+ −
Flex Gear Differential Oil(35cc) DOT2
YOK-CS-DOT2
Oel-Vergleichstabelle #650 = DOT1 #800 = DOT2 #1000 = DOT3 #1200 = DOT4 #1600 = DOT5 #2100 = DOT6 #3000 = DOT7
CHF11.90
Auf Lager  
+ −
10×6mm Bearing
YOK-BB-106-4A
entspricht: BB-106-4
CHF13.90
Auf Lager  
+ −
Alu F/R Upper Arm Mount L/R YZ4-SF
YOK-S4-300UMA
entspricht: S4-300UM
CHF41.50
Auf Lager  
+ −
YOKOMO Factory T-Shirt L size
YOK-ZC-T27LA
entspricht: ZC-T27L
CHF27.40
Auf Lager  
+ −
Aluminum frame 30mm Cooling fan (Silver)
YOK-D-CFSA
A cooling fan that uses a luxurious aluminum frame. With a 30mm size that is ideal for cooling the motor, having a lineup of three colors, silver, red, and purple, which would match with variations of the YD-2 series. The connector is a pin shaped that will be easy to connect with the power...
CHF33.90
Auf Lager  
+ −
YOKOMO Factory T-Shirt XL size
YOK-ZC-T27XLA
entspricht: ZC-T27XL
CHF27.40
Auf Lager  
+ −
Graphite Front Upper Arm Support YR-10US
YOK-YR-10US
 
CHF13.50
Auf Lager  
+ −
Steering block L/R
YOK-Z2-415SH3A
Hard type
CHF7.90
Auf Lager  
+ −
Upper Deck
YOK-B7-00314
 
CHF26.90
Auf Lager  
+ −
Bulk Head A (Front Left/Rear Right/Black)
YOK-B7-302A15
 
CHF26.90
Auf Lager  
+ −
RP Driftfelge High Tract.(6mm Offset) weiss 1paar
YOK-RP-6313W6A
In reflect with the demand for more road trace feels at low traction track surface, Yokomo will release new high traction wheels under Racing Performer brand. T
Auswahlhilfe190mm Touring MaterialDrift Reifen/Rad-TypFelgen Massstab1:10 EinsatzOn-Road Drift
CHF9.50
Auf Lager  
+ −
Bell Crank Bridge black
YOK-B7-201B6
 
CHF26.90
Auf Lager  
+ −
BD-10 Front stabilizer wire set  (f (f1.2/1.3/1.4mm)
YOK-B10-412FWA
entspricht: B10-412FW
CHF26.90
Auf Lager  
+ −
Ventilated Dual Slipper Set YZ-2/B-Max2
YOK-Z2-670V
CHF39.90
Auf Lager  
+ −
Off-road body for SO series (light weight)
YOK-Z2-101S2L
CHF26.90
Auf Lager  
+ −
Rear Transmission Case L/R (Carbon) YZ-4
YOK-Z4-302R
 
CHF11.50
Auf Lager  
+ −
Front Balance Weight (L/R 1 each·10g)
YOK-B7-BWF10
CHF29.90
Auf Lager  
+ −
Hard Graphite main Chassis YR-10 Formula
YOK-YR-02H
Hard graphite main chassis for YR-10 Formula
CHF79.90
Auf Lager  
+ −
Alu Susp. Mount Set YD-2
YOK-Y2-301AS
 
CHF79.90
Auf Lager  
+ −
Steering hub carrier / bushing YZ-2 DTM3.1/CAL3.1
YOK-Z2-413G3A
Graphite molded steering hub carrier for YZ-2 DTM3.1 / CAL3.1. The kingpin position has been changed to the front side compared to the past, and the shape has been changed to attach the steering stopper. Uses graphite resin, which is harder than the standard, and improves steering response.
CHF17.90
Auf Lager  
+ −
Aluminum front lower A arm set for YD-2 (black)
YOK-Y2-AS06BA
entspricht: Y2-AS06B
CHF79.90
Auf Lager  
+ −
Aluminum front lower A arm set for YD-2 (red)
YOK-Y2-AS06RA
entspricht: Y2-AS06R
CHF79.90
Auf Lager  
+ −
Rear hub carrier/Bushing (F3 pin/Hard type) DTM3/C
YOK-Z2-415RDCA
Hard type
CHF11.50
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Rot für RD2.0
YOK-RD-301ASR
CHF79.90
Auf Lager  
+ −
Alu rear hub carrier (Toe-in 0.5°) for B-MAX4III
YOK-B4-415R05
 
CHF39.90
Auf Lager  
+ −
Rear suspension arm Type-B (F3 outer pin) for YZ-2
YOK-Z2-008R3A
F3 Outer pin spec
CHF7.90
Auf Lager  
+ −
Achsschenkel Alu
YOK-C-415A
 
CHF39.90
Auf Lager  
+ −
Alu Motor Mount (Chamfer) YZ-4
YOK-Z4-304C
 
CHF39.90
Auf Lager  
+ −
steel rear suspension mount for YZ-2T / YZ-2 (fron
YOK-Z2-300RFSA
This is a steel suspension mount for the YZ-2 series.
CHF26.90
Auf Lager  
+ −
Racing Performer Rotor D12.5xd5.00x25.3 for g.n.m.
YOK-RP-021
 
CHF39.90
Auf Lager  
+ −
C-clip Universal Shaft
YOK-B7-010RA
C-clip Universal Shaft (Aluminum 44mm bone for Rear)
CHF39.90
Auf Lager  
+ −
Kategorien
Filter
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Alle zeigen (208)
Passend zu...
    Alle zeigen (73)
Abmessungen
Auswahlhilfe
    Alle zeigen (26)
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Alle zeigen (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Alle zeigen (46)
Betriebsspannung
Zurücksetzen (reset)
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags