Français (CH)
ERSATZTEIL-FINDER

pièces de rechange

pièces de rechange

Trier par:
Recommandé
Montrer:
48
Molded Main Chassis for RO1.0
YOK-Z2-002RO
This is the standard main chassis for the RO1.0. It is a one-piece resin main chassis that provides moderate flexibility to improve driving stability.
CHF 32.50
En stock  
+ −
Aluminum Steering Bell Crank Set for RO1.0/SO1.0
YOK-Z2-201SBA
This is an aluminum bell crank set that gives the RO1.0/SO1.0 steering even sharper.
CHF 74.90
Rupture de stock
Tungsten 3/32 balls for differential (14 pieces)
YOK-Z2-505TA
These are ultra-high-precision tungsten carbide differential balls. The precision of the ball surface improves the smooth operation of the differential and makes it highly wear-resistant. This product comes in a pack of 14, perfect for the Z2-500 ball differential used on the YZ-2 and YZ-4.
CHF 12.80
En stock  
+ −
Molded Shock Towers for RO1.0
YOK-Z2-017S
Standard shock tower for RO1.0. Front and rear set.
CHF 11.40
En stock  
+ −
Rear Hub Carrier for RO1.0
YOK-Z2-415R1
This is a standard plastic rear hub carrier for the RO1.0. It comes in a set of two, with the same shape for the left and right.
CHF 10.30
En stock  
+ −
Clear Lexan Body for RO1.0
YOK-Z2-101RO
This is the standard RO1.0 polycarbonate body. To use, please cut off the excess and paint it with polycarbonate paint. *The photo is an example of how to paint the model. The product is made of clear polycarbonate, so please prepare a dedicated spray paint separately. *Window masking...
CHF 23.10
En stock  
+ −
Light Unit Plastic Parts (ORC Z33)
YOK-SD-Z33LA
CHF 7.10
En stock  
+ −
F.shock body
YOK-YS-4S-8
CHF 13.90
En stock  
+ −
R. Shock Body
YOK-YS-4L-8
CHF 14.50
En stock  
+ −
Graphite Rear Chassis (2.4mm) for SD2.0
YOK-Y2-002S2R
CHF 27.90
En stock  
+ −
Aluminum Chassis Bridge for SD2.0
YOK-Y2-002SDB
CHF 24.90
En stock  
+ −
Graphite Rear Upper Deck (2,4mm) for SD2.0
YOK-Y2-003SDR
CHF 22.90
En stock  
+ −
Aluminum Bellcrank Arm Lower Adaptor for SD2.0
YOK-Y2-200L
CHF 18.90
En stock  
+ −
Graphite Bellcrank Arm Plate (3.0mm) for SD2.0
YOK-Y2-200P
CHF 16.90
En stock  
+ −
Bellcrank Arm Upper Adaptor for SD2.0
YOK-Y2-200U
CHF 23.90
En stock  
+ −
Bellcrank Arm Mount Post for SD2.0
YOK-Y2-201P
CHF 6.90
En stock  
+ −
Aluminum Upper Deck Post
YOK-Y2-303AP
CHF 28.90
En stock  
+ −
Aluminum Motor Mount for SD2.0
YOK-Y2-304SD2
CHF 32.90
En stock  
+ −
Kugellager 4x11x4 2stk.
YOK-BB-1140-2
CHF 8.90
En stock  
+ −
AlumOut Drive Cup of Gear Diff for YD-2
YOK-Y2-501GSAA
entspricht: Y2-501GSA
CHF 13.70
En stock  
+ −
4.0f"E"Clips (10pcs.)
YOK-ZC-411A
entspricht: ZC-411
CHF 2.30
En stock  
+ −
YOKOMO Factory T-Shirt 2XL size
YOK-ZC-T272XLA
entspricht: ZC-T272XL
CHF 27.40
En stock  
+ −
Rear Wheel for GT1
YOK-GT1-40R01
CHF 6.80
En stock  
+ −
RP Ultra Shock Oil #25 (Yellow)
YOK-RP-113250
CHF 8.90
En stock  
+ −
RP Ultra Shock Oil #30 (Green)
YOK-RP-113300
CHF 8.90
En stock  
+ −
RP Ultra Shock Oil #35 (Orange)
YOK-RP-113350
CHF 8.90
En stock  
+ −
RP Ultra Shock Oil #45 (Clear)
YOK-RP-113450
CHF 8.90
En stock  
+ −
Brass Motor Slit Balance Weight 3.6g
YOK-MS-BWM
This is a brass weight that is attached to the groove on the opposite side of the motor slit, located on the MS1.0 main chassis to equalize the left and right rigidity. It weighs 3.6g and contributes to left-right balance adjustment.
CHF 13.70
En stock  
+ −
Brass Rear Balance Weight 5g for MS1.0
YOK-MS-BWR5
This brass weight can be installed on the front side of the rear bulk of the MS1.0. Its shape avoids interference with the rear belt and reduces the joint area with the chassis so that it does not affect the flex of the chassis.
CHF 13.70
En stock  
+ −
Yokomo Shock Oil Stand for Multi Bag
YOK-YT-YSS
This stand storage item can hold bottles of shock oil, differential oil, etc. It can hold bottles up to 29mm in diameter, preventing oil leakage due to tipping over. It is also sized to be easily combined with the Yokomo Multi Bag and can be used as a special case for storing oil and chemicals...
CHF 13.70
En stock  
+ −
Center Transmission Case Set
YOK-SD-302C
CHF 16.00
Rupture de stock
Radial Rubber Tire Hard for GT1
YOK-GT1-39H
CHF 12.80
En stock  
+ −
Radial Rubber Tire Medium for GT1
YOK-GT1-39M
CHF 12.80
En stock  
+ −
Steel GearDiff Drive Cup (Bearing type/1pcs.)
YOK-MS-501GS
CHF 12.80
En stock  
+ −
Steel Spool Drive Cup (Bearing type/1pcs.)
YOK-MS-501MCS
CHF 12.80
Rupture de stock
f5.0 Preci.itan.King Pin Ball 10.3mm(4pcs.)
YOK-RP-117
High-precision titanium king pin balls for use on the upper and lower steering block of the MS1.0. The weight reduction improves machine response, and the ball height is 1mm higher than the kit's standard one, allowing the roll center to be changed for even better grip.
CHF 13.70
En stock  
+ −
Graphite Front Shock Tower (3mm) for RS1.0
YOK-RS-017SG
CHF 13.70
En stock  
+ −
Alum. Rear Body Post Mount for MS1.0
YOK-MS-016MA
Aluminum rear body post mount for MS1.0. Converts the standard rearward post into a vertical one, directly receiving downforce and enabling mounting of bodies with long rear overhangs, scale bodies, etc
CHF 15.40
En stock  
+ −
Graphite Rear Shock Tower (3mm) for RS1.0
YOK-RS-018SG
CHF 21.40
En stock  
+ −
Titanium Turnbuckle Set for MO2.0
YOK-MO-TBS20
Titanium turnbuckle set for 4WD off-road car MO2.0. 2 pieces each of 39mm, 45mm and 52mm are combined to reduce weight mainly on the upper part of the machine, which improves the performance and response of the car.
CHF 32.50
En stock  
+ −
Titanium Turnbuckle Set for SO2.0
YOK-SO-TBS20
CHF 32.50
En stock  
+ −
D-MAX Diversion ADVAN ONE-VIA Body w/L.Decal
YOK-SD-DM13BB
CHF 64.10
Rupture de stock
X TREME PS13 Silvia Body w/Light Decal
YOK-SD-PS13BB
CHF 64.10
Rupture de stock
Team TOYO GP SPORTS 180SX Body w/Light Decal
YOK-SD-TY180BB
CHF 64.10
Rupture de stock
Graphite Main Chassis für RD2.0 2.4mm
YOK-RD-002G
The graphite main chassis and upper deck that RD2.0 users have been waiting for are finally released! The plates are cut out of matte graphite for a competitive design that will completely change the look of your machine. The silhouette of the machine will be sharpened, and you will be able...
CHF 94.90
Rupture de stock
Graphite Upper Deck for RD2.0 (2.2mm)
YOK-RD-003G
The graphite main chassis and upper deck that RD2.0 users have been waiting for are finally released! The plates are cut out of matte graphite for a competitive design that will completely change the look of your machine. The silhouette of the machine will be sharpened, and you will be able...
CHF 32.90
Rupture de stock
Spare Magnet for Body Mount A
YOK-ZS-016MG1
Spare magnet for drifting magnet body mount. Two types are lined up: one with holes to be used on the chassis side and one without holes (F12×3mm thick) to be attached to the body. Each comes in a pack of 2.
CHF 8.90
En stock  
+ −
Spare Magnet for Body Mount B
YOK-ZS-016MG2
Spare magnet for drifting magnet body mount. Two types are lined up: one with holes to be used on the chassis side and one without holes (F12×3mm thick) to be attached to the body. Each comes in a pack of 2.
CHF 5.90
En stock  
+ −
Catégories
pièces de rechange
Pignions
Combo avec Controler
Matériaux de décoration
Carosseries
Accessoires de carrosserie
Accessoires pour des camions
Moteur
roue et pneu
Schablonen (Paint Masks)
Tuning
+6Plus
Filtrer
Verfügbarkeit
Verfügbar beim Lieferanten
Hersteller (1)
    Afficher tout (212)
Compatibilité
    Afficher tout (81)
Abmessungen
Auswahlhilfe
    Afficher tout (26)
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 304
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
    Afficher tout (13)
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Marke
    Afficher tout (46)
Betriebsspannung
Effacer
Portofreie Lieferung

Online-Bestellungen portofrei ab CHF 80.-

Bestellung auf Rechnung

Einfach auf Rechnung bestellen.

Schnelle Abwicklung

Vor 16.00 Uhr bestellt, Versand per A-Post gleichentags