Français (CH)
ERSATZTEIL-FINDER

Yokomo

Recommandés
48 Par page
Side plate/battery post/antenna mount for YZ-4SF2
YOK-S4-002SPG
These graphite-mixed resin molded side plates can increase the rigidity of the YZ-4SF2 chassis. It is especially effective when driving on high grip surfaces, and improves stability when entering a corner, enabling cornering with good steering response. It is effective not only on...
CHF 19.50
En stock  
+ −
Metal Bevel Gear for Gear Diff YD-2
YOK-Y2-503GMA
entspricht: Y2-503GM
CHF 15.50
En stock  
+ −
Front X33 Shock Shaft YZ-2 ers.du. z2-s2st
YOK-Z2-S2SD
 
CHF 14.50
En stock  
+ −
Alu Transmission Case (edge trimmed) bottom
YOK-Y4-302LC
 
CHF 57.90
En stock  
+ −
Case for Parts (20×29×20mm 8Box) 3pcs
YOK-YC-3A
entspricht: YC-3
CHF 8.90
En stock  
+ −
MIP Pucks Carbide rebuild kit for YZ-2 Stock ver.
YOK-Z2-17095
CHF 57.90
En stock  
+ −
Aluminum motor mount / adapter for YZ-4SF2
YOK-S4-304-2A
entspricht: S4-304-2
CHF 57.90
En stock  
+ −
Spacer shim for F3.5 inner pin
YOK-Z2-009S35A
4pcs/set
CHF 5.50
En stock  
+ −
Lexus RC-F GT3 Clear Lexan Body (Light Weight)
YOK-SP-LFGT3BL
This is the light weight body of the LEXUS RC F GT3. Compared to the standard body, the weight is reduced by approximately 20%, which greatly contributes to the improvement of the car's athletic performance. It is effective for circuit driving with higher grip.
CHF 57.90
En stock  
+ −
FCD Gear (Front x.059) for DP series Ball Diff
YOK-D-172
 
CHF 28.90
En stock  
+ −
LED Reflekt. Set Team Samurai FC3S
YOK-SD-TSFCL
 
CHF 11.50
En stock  
+ −
FCD Gear (Front x.069) for DP series Ball Diff
YOK-D-174
 
CHF 28.90
En stock  
+ −
FCD Gear (Front x.069) for DP series Solid Axle
YOK-D-175
 
CHF 28.90
En stock  
+ −
Long stroke rear lower suspension arm YD-2/YD4
YOK-Y2-008R-A
New from Yokomo come these Long stroke lower suspension arm for YD2 and YD-4.
CHF 8.50
En stock  
+ −
YD-4 Ball Diff FCD Gear Set (Front x 0.59)
YOK-Y4-50359
 
CHF 28.90
En stock  
+ −
YD-4 Ball Diff FCD Gear Set (Front x 0.69)
YOK-Y4-50369
 
CHF 28.90
En stock  
+ −
Carbon Graphite Rear Shock Tower YZ-4
YOK-Z4-018
 
CHF 22.90
En stock  
+ −
Alu Special motor mount YD-2
YOK-Y2-304HA
 
CHF 28.90
En stock  
+ −
Bellcrank BD9/BD10
YOK-B9-202SBAA
entspricht: B9-202SBA
CHF 28.90
En stock  
+ −
Maintenance kit for W Joint Universal BD9/BD10
YOK-B9-010TWA
Maintenance kit
CHF 22.90
En stock  
+ −
Molded F&R Shock Tower
YOK-SD-017TA
entspricht: SD-017T
CHF 9.50
En stock  
+ −
Wing mount/body mount YZ-4SF
YOK-S4-001WA
entspricht: S4-001W
CHF 10.90
En stock  
+ −
Main Chassis FRP 2.5mm for MS1.0
YOK-MS-002S
This main chassis for MS1.0 is made of FRP material with soft resilience. It is especially effective on low-grip surfaces and adapts well to uneven road surfaces, enabling efficient traction gains.
CHF 56.90
En stock  
+ −
Gear Differential Aluminum Drive Cup
YOK-BD-501GC
CHF 13.40
En stock  
+ −
Aluminum Front Suspention Block (Left)
YOK-GT-08AL
 
CHF 18.90
En stock  
+ −
Aluminum Front Suspention Block (Right)
YOK-GT-08AR
 
CHF 18.90
En stock  
+ −
Team Yokomo compact nylon tool bag
YOK-YT-YTBA
A tool bag finished with durable nylon fabric and careful sewing. The main storage compartment is double zip type which makes easy to open or close the bag. The back of the lid has a compartment pocket for storing tools and a zipper pocket for storing thin items. The main compartment allows...
CHF 37.90
En stock  
+ −
Front anti roll bar set 3bars YZ-2T
YOK-Z2-412FTA
entspricht: Z2-412FT
CHF 18.90
En stock  
+ −
Aluminum 23mm Clamp Servo Horn(25T Spline) for FUT
YOK-ZC-204523A
entspricht: ZC-204523
CHF 18.90
En stock  
+ −
Aluminum direct spur gear hub for YZ-2
YOK-Z2-670HDA
entspricht: Z2-670HD
CHF 18.90
En stock  
+ −
Yokomo Racing Tool Turnbuckle Wrench 4.0mm (Carbon
YOK-YT-TBWRA
This is a tool that makes it easier to turn the 4.0mm size turnbuckle used in Yokomo machines. The carbon handle has a red anodized accent, giving it a lacy look. This is an essential tool when setting camber and toe-in.
CHF 18.90
En stock  
+ −
Aluminum Shock Cap for YZ-870C (2pcs)
YOK-YZ-S8A
This aluminum shock cap fits the YZ-870C shock.The drain screw makes it easy to assemble the aeration system, and the look is close to the original.
CHF 18.80
En stock  
+ −
Inner Suspension Arm Pin
YOK-B4-009BA
entspricht: B4-009B
CHF 5.50
En stock  
+ −
Matte graphite upper deck set for YD-2S Sliderack
YOK-Y2-003SRA
This is the upper deck set for the S series used in the YD-2SXIII. It comes with a 2.5mm thick matte graphite upper deck and aluminum parts for connecting to the front bulk and rear gearbox. * The front bulkhead is compatible with aluminum slide racks (Y2-202BH). Please note that it cannot be...
CHF 55.90
En stock  
+ −
Aluminum Rear Bulk Head (Right for Flexible)
YOK-GT-20FR
 
CHF 27.90
En stock  
+ −
Optional parts set for BD11 Upgrade 3
YOK-B11-OP3A
Aluminum screw & titanium ball end that reduces the weight of the upper part of the chassis and promotes a lower center of gravity as well as weight reduction. All are high-precision parts manufactured by carving, and are gems that improve the quality of machine make-up. In particular, the...
CHF 44.90
En stock  
+ −
Carbon Graphite Upper Deck
YOK-B9-00319A
entspricht: B9-00319
CHF 27.90
En stock  
+ −
Graphite front shock tower BD12
YOK-B12-017
CHF 27.90
En stock  
+ −
Alu separate suspention mountB (43.5~46.7mm)BD8
YOK-B8-301SBA
 
CHF 24.90
En stock  
+ −
Kohlefaser Oberdeck Vorne 2.0mm MS2.0
YOK-MS-003F-2
CHF 27.90
En stock  
+ −
Kohlefaser Oberdeck hinten 2.0mm MS2.0
YOK-MS-003R-2
CHF 27.90
En stock  
+ −
Front Wheel Hub
YOK-B4-011FA
entspricht: B4-011F
CHF 8.90
En stock  
+ −
Kohlefaser Querlenker Hinten Unten 2.4mm MS2.0
YOK-MS-008R-2
CHF 27.90
En stock  
+ −
Vorder/Hinterfelge YZ2-T 12mm Hex Hub 2stk.
YOK-Z2-830TA
entspricht: Z2-830T
AuswahlhilfeTruck MaterialGummi Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF 13.90
En stock  
+ −
Seitenplatten für YZ2-CAL3.1/DTM3.1
YOK-Z2-002S31A
entspricht: Z2-002S31
CHF 13.90
En stock  
+ −
BD10F Drive Belt 103T
YOK-BD-309LA
entspricht: BD-309L
CHF 13.90
En stock  
+ −
30mm Fan Shroud SO2.0
YOK-SO-FSS20
This fan shroud is attached to the cooling fan of a 2WD off-road vehicle to increase the cooling effect of the motor. It will greatly contribute to maintaining motor performance and efficiency in the coming season of higher temperatures. A 30mm cooling fan is attached to the chassis via the...
CHF 13.90
En stock  
+ −
Super blend Shock Oil 200
YOK-YS-200B
entspricht: YS-200A
CHF 5.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
–
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung