ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
48
Aluminum Shock Cap Ball (Hard coat 4pcs)
YOK-YS-8BHA
entspricht: YS-8BH
CHF8.50
Auf Lager  
+ −
Main Chassis YZ-2
YOK-Z2-002
 
CHF89.90
Auf Lager  
+ −
Teams Alu Achsschenkel hinten 3teilig für YD2
YOK-Y2-415ART
This aluminum rear hub carrier can be used commonly with the YD-2 series. The universal shaft with a short axle shaft for narrow scrubs is used, and the universal joint pin is positioned as far outward as possible, closer to the outer suspension arm pin, to activate the suspension movement and...
CHF89.90
Auf Lager  
+ −
Alum.Main Chassis for SO2.0
YOK-Z2-002S2
CHF89.90
Auf Lager  
+ −
L5 Rear Suspension Arm graphite YZ4-SF
YOK-S4-008RL5A
entspricht: S4-008RL5
CHF13.90
Auf Lager  
+ −
Slide Rack Set for RD1.0/2.0
YOK-RD-202SR
Slide rack set for use with RD1.0 and 2.0 to further increase the cutting angle.Use the mount on the servo rear side that comes standard with the kit.
CHF89.90
Auf Lager  
+ −
Aluminum SLF Big Bore Shock Set Blue
YOK-Y2-SBBSBL
Super low friction aluminum big bore shock set in blue anodized aluminum color. The cylinder diameter is wider than conventional shocks and the shock length is newly designed for drifting. Large capacity and increased stability.
CHF89.90
Auf Lager  
+ −
Alu Front Steering Hub Carrier 12.5° YZ-4
YOK-Z4-413125A
 
CHF59.90
Auf Lager  
+ −
Aluminum X shock cap Bmax2/4
YOK-B2-S812AA
entspricht: B2-S812A
CHF12.20
Auf Lager  
+ −
Alu Front Arm für MD1.0
YOK-MD-008FUA
CHF59.90
Auf Lager  
+ −
YZ-2 Alu Bell Crank Base
YOK-Z2-201BB3A
entspricht: Z2-201BB3
CHF21.50
Auf Lager  
+ −
Alu Rear Weight H Arm Purple für RD2.0/SD2.0
YOK-Y2-P08RAW
CHF59.90
Auf Lager  
+ −
Front One-Way Housing YD-4
YOK-Y4-641
 
CHF35.00
Auf Lager  
+ −
Drift spring set (6 Types) for RWD Drifting
YOK-D-180A
¦ YOKOMO have developed a new type of spring allowing for further fine tuning of your chassis to suit surface type and track layout!
CHF44.90
Auf Lager  
+ −
Graphite molded front sus-arm YZ2-DTM/CAL 3/3.1
YOK-Z2-008F3GA
entspricht: Z2-008F3G
CHF15.90
Auf Lager  
+ −
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF34.90
Auf Lager  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF19.90
Auf Lager  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform.
CHF34.90
Auf Lager  
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF57.90
Auf Lager  
+ −
Ball Diff Kit YZ-2CA/DT/YZ-4 DP48 52T
YOK-Z2-500A
YZ-2CA/DT/YZ-4 DP48 52T Ball differential kit
CHF49.90
Auf Lager  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF42.90
Auf Lager  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF42.90
Auf Lager  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF8.90
Auf Lager  
+ −
Sway Bar Set RS2.0 (Only Aluminum Bulkhead)
YOK-RS-412AS
These stabilizers can be mounted on RS2.0 aluminum lower bulkheads. The set comes with three different bars, front and rear, each with ball bearing support for smooth operation and increased stabilizing effect.
CHF55.90
Auf Lager  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
Auf Lager  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF41.90
Auf Lager  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
Auf Lager  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
Auf Lager  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF11.50
Auf Lager  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
Auf Lager  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
Auf Lager  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF22.90
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF79.90
Auf Lager  
+ −
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF79.90
Auf Lager  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF6.40
Auf Lager  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
Auf Lager  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
Auf Lager  
+ −
Regler Programmierkarte für BL4 Serie
YOK-BL-YBP4
CHF32.90
Auf Lager  
+ −
Tubular Graphite Main Drive Shaft for YD-4MR
YOK-Y4-644GMR
 
CHF39.90
Auf Lager  
+ −
BD8/BD7'16 Gear Diff Unit
YOK-B8-500GS
 
CHF52.90
Auf Lager  
+ −
YZ-2 Aluminum bell Crank (L/R)
YOK-Z2-201BA3A
entspricht: Z2-201BA3
CHF32.90
Auf Lager  
+ −
Yokomo Pit Mat 100x60cm
YOK-YT-PM26A
Yokomo's pit mat is ideal for pit work on circuits. With a width of 100 cm and a depth of 60 cm, the surface has a smooth satin-like feel, and the Yokomo Racing Factory print logo is placed large to create a competitive image. The back side is made of rubber material to prevent slippage...
CHF52.90
Auf Lager  
+ −
SLF Short Shock Set
YOK-B7-2014S
 
CHF79.00
Auf Lager  
+ −
LMR 27 Rear Wing
YOK-Z2-CAL2WA
entspricht: Z2-CAL2W
CHF14.90
Auf Lager  
+ −
Motor mount
YOK-B7-32L15
 
CHF38.90
Auf Lager  
+ −
Alu Motor mount inkl. Fan YD-2
YOK-Y2-304SFA
entspricht: Y2-304SF
CHF49.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)