ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
12
BD11 decal sheet
YOK-ZC-BD11-1A
A decal sheet with the BD11 and Yokomo logos. It's perfect for dressing up your machine, and sticking it on your body will increase your attachment to the machine.
CHF8.90
En stock  
+ −
Graphite molded Front sus-arm for YZ-4SF2
YOK-S4-008F2GA
entspricht: S4-008F2G
CHF15.90
En stock  
+ −
Graphite steering block plate for BD10 / 9 RTC
YOK-B10-RTC-5A
entspricht: B10-RTC-5
CHF10.90
En stock  
+ −
Stabiliser Wire BD11 front 1.4mm
YOK-B11-412F4A
F1.4mm is added as a variation of the sway bar wire for BD11. This wire is one rank stiffer than the previous lineup and is mainly used to limit roll on high-grip surfaces. Compared to BD10, BD11 has a lower lever ratio and is more compatible with softer springs. However, on...
CHF9.90
En stock  
+ −
Stabiliser wire BD11 hinten 1.4mm
YOK-B11-412R4A
CHF9.90
En stock  
+ −
Rear short "X30" shock body for YZ-2DTM3 / CAL3
YOK-S4-S4MA
A shock body that can be used on the rear of the YZ-2DTM3 / CAL3 and the front of the YZ-2T. 1 bottle included.
CHF14.50
En stock  
+ −
Body Mount Patch 6x0.5mm
YOK-ZR-BMP6B
entspricht: ZR-BMP6A
CHF7.50
En stock  
+ −
Programmierbox für RPX3 ESC
YOK-BL-R26P3
A dedicated programmer is required to change the RPX3 program. We plan to distribute firmware to update the old programmer (BL-R26P), but you will need to revert to the old firmware (to be distributed) to change the program of the old ESC after the update.
CHF38.90
En stock  
+ −
Receiver Capacitor (non-polarized)
YOK-BL-RRCP
This capacitor is connected to the BEC channel of the receiver to reduce noise and stabilize the servo current. When a large load is placed on the servo during driving, the capacitor can momentarily supplement power to stabilize the servo's operation. Since it is non-polarized, it...
CHF17.90
En stock  
+ −
Big Bore Stossdämpfer Diaphragms 4stk. silicon
YOK-YS-8DS
CHF4.90
En stock  
+ −
Progressive Federn 1.80 bis 2.10 20mm
YOK-B10-SSP18
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
En stock  
+ −
Progressive Federn BD11 1.90-2.20 20mm
YOK-B10-SSP19
This new spring matches the BD11 with a lower lever ratio than before. The overall setting is softer, making it a perfect match for the BD11's long suspension arms. You can find a good balance by choosing from this lineup for both front and rear. The progressive type spring has a pitch change...
CHF12.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer