ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
24
Alu F.Lower Sus.Mount 44mm (Chamfer) YZ-4
YOK-Z4-300FL4
 
CHF34.90
Auf Lager  
+ −
Steering bell crank/Servo horn/Servo mount DTM3/CA
YOK-Z2-200-3A
entspricht: Z2-200-3
CHF19.90
Auf Lager  
+ −
Multi Weight Plate BD9/BD10
YOK-B9-MWPA
YOKOMO immediately release a weight plate for BD9 which is designed for optimization of the left-right balance and low center of gravity for the BD9 platform.
CHF34.90
Auf Lager  
+ −
YOKOMO Steering Gyro YG-302V2
YOK-YG-302V2
This is a basic steering gyro that can be used in various categories including drift cars. Upgraded to V2 and has improved response than before, allowing for comfortable driving even on slippery roads. Can be used with transmitters and receivers with 2 or more channels, and is used by wiring...
CHF57.90
Auf Lager  
+ −
“X30” 13 shock set (front)
YOK-S4-S1S13
This is a F13mm big bore shock set. The S size is ideal for the front of the SO/MO series, and the shaft diameter is 3.0mm.
CHF62.90
Auf Lager  
+ −
Bell crank (1mm longer/F8×F5 bearing assembled)
YOK-B7-202S1
 
CHF42.90
Auf Lager  
+ −
Alu Steering Block YD-4
YOK-Y4-415SC
 
CHF42.90
Auf Lager  
+ −
Wing Plate for Off-Road Car
YOK-Z2-110A
entspricht: Z2-110
CHF11.50
Auf Lager  
+ −
Gull Type Front Susp. Arm L/R (0) YZ-4
YOK-Z4-008FG
CHF8.90
Auf Lager  
+ −
Neu
Sway Bar Set RS2.0 (Only Aluminum Bulkhead)
YOK-RS-412AS
These stabilizers can be mounted on RS2.0 aluminum lower bulkheads. The set comes with three different bars, front and rear, each with ball bearing support for smooth operation and increased stabilizing effect.
CHF55.90
Auf Lager  
+ −
Gear Diff. Case (High capacity) CAL2
YOK-Z2-503GH2A
entspricht: Z2-503GH2
CHF11.50
Auf Lager  
+ −
Rotary Sensor Set Yokomo M2 Motor
YOK-RP-038A
entspricht: RP-038
CHF41.90
Auf Lager  
+ −
Alum.13 Shock Cap (2pcs.) for SO/MO2.0
YOK-S4-S813A
Aluminum shock cap with drain screw for easy assembly. Easy to quantify settings and absorb road impacts with increased operating efficiency.
CHF20.50
Auf Lager  
+ −
Factory Team Alu Chassis BD11/BD10
YOK-B11-002FA
This aluminum main chassis is used in the BD11 Factory Team Edition. The chassis is made of hard aluminum material, but with bold wall cutting, mainly around the rear, to provide slightly more rear traction. Traditionally, aluminum chassis are used for high-grip surfaces such as carpet,...
CHF159.90
Auf Lager  
+ −
Front upper arm mount
YOK-Z2-300FUA
entspricht: Z2-300FU
CHF22.90
Auf Lager  
+ −
Alu Chassis BD12
YOK-B12-002A
CHF159.90
Auf Lager  
+ −
MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver
YOK-Z2-18841
CHF79.90
Auf Lager  
+ −
Aluminum lightweight front steering block for YD-2
YOK-Y2-415SALA
It is a lightweight steering block that is about 20% lighter than the conventional one by shaping up the aluminum steering block that has been released so far. The upper and lower kingpin positions connected to the A arm are offset, and the kingpin axis can be tilted inward once without a...
CHF79.90
Auf Lager  
+ −
Rear Wheel
YOK-B4-827A
entspricht: B4-827
AuswahlhilfeBuggy MaterialKunststoff Reifen/Rad-TypFelgen Massstab1:10 EinsatzOff-Road
CHF6.40
Auf Lager  
+ −
Aluminum Adj. Suspension Mount Set Blau RD2.0
YOK-RD-301ASBL
CHF79.90
Auf Lager  
+ −
Neu
Aluminum Lower Bulkhead Set RS1.0/RS2.0
YOK-RS-32ALS
Aluminum lower bulkhead for RS1.0/2.0. It is anodized in blue, the optional image color of the RS series, and is very effective in improving the looks of the machine. Can be combined with optional stabilizer.
CHF79.90
Auf Lager  
+ −
Regler Programmierkarte für BL4 Serie
YOK-BL-YBP4
CHF32.90
Auf Lager  
+ −
B-Max II "Hard" Li-Po Compatible Main Chassis NEW
YOK-BM-002LH
 
CHF39.90
Auf Lager  
+ −
Suspension mount messing separate 42.0mm-7.0gr.
YOK-B7-3120BSB
 
CHF39.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)