Yokomo

CHF 7.90
En stock  
+
CHF 16.90
En stock  
+
YOK-RS-501GG
CHF 3.90
En stock  
+
CHF 7.90
En stock  
+
CHF 10.90
En stock  
+
YOK-RS-630
CHF 4.90
En stock  
+
YOK-RS-644
CHF 4.90
En stock  
+
CHF 5.90
En stock  
+
YOK-RS-SG4886
CHF 5.90
En stock  
+
CHF 8.90
En stock  
+
CHF 4.50
En stock  
+
YOK-B10-202SBLA
This is an optional steering bell crank that changes the steering characteristics of BD10. The length from the center of the steering post to the linkage pivot at the tip is 20mm, which is 1.5mm longer than the BD10 standard bell crank (18.5mm). The Ackermann ratio changes and the turning...
CHF 24.90
En stock  
+
CHF 22.90
Rupture de stock
YOK-S4-CFMA
entspricht: S4-CFM
CHF 24.50
En stock  
+
CHF 15.90
En stock  
+
YOK-B12-016HB
Compatible with rear body posts that protrude rearward, such as BD12, these mounting parts reliably receive downforce and increase rear traction. Compatible with Twister/Twister Special bodies, the mounting parts are secured to the body using the wing fixing screws. Offset can be...
CHF 8.90
En stock  
+
YOK-ZC-TB16T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 8.90
Rupture de stock
YOK-ZC-TB18T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 8.90
Rupture de stock
YOK-ZC-TB20T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
En stock  
+
YOK-ZC-TB25T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
En stock  
+
YOK-ZC-TB27T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 9.90
En stock  
+
YOK-ZC-TB30T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+
YOK-ZC-TB33T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+
YOK-ZC-TB36T
This special screw is manufactured with a reverse thread on one side of the screw at both ends, allowing the distance between parts at both ends to be adjusted when the screw is rotated in one direction. It is mainly used for upper arms and tie rods to facilitate adjustment of camber...
CHF 11.90
En stock  
+
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix
CHF
CHF
  • CHF 1.5
  • CHF 849
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung