ERSATZTEIL-FINDER

Yokomo

Trier par:
Recommandé
24
Shock Cylinder (2pcs) MS1.0
YOK-MS-S4S
CHF17.90
En stock  
+ −
Shock Shaft (19.1mm/ 2pcs) MS1.0
YOK-MS-S5S
CHF5.90
En stock  
+ −
Linear Shock Springs (1.90/Red) MS1.0
YOK-MS-SSL190
CHF11.90
En stock  
+ −
Steel Turnbuckle 13mm (2pcs) MS1.0
YOK-MS-TB13
CHF5.70
Rupture de stock
Linear Shock Springs (1.95/Yellow) MS1.0
YOK-MS-SSL195
CHF11.90
Rupture de stock
Linear Shock Springs (2.00/Blue) MS1.0
YOK-MS-SSL200
CHF11.90
En stock  
+ −
Front Sway Bar Wire 1.0mm MS1.0
YOK-MS-412F0
CHF7.90
En stock  
+ −
Front Sway Bar Wire 1.2mm MS1.0
YOK-MS-412F2
CHF7.90
En stock  
+ −
Rear Sway Bar Wire 1.0mm MS1.0
YOK-MS-412R0
CHF7.90
En stock  
+ −
Rear Sway Bar Wire 1.2mm MS1.0
YOK-MS-412R2
CHF7.90
En stock  
+ −
Light Buckets für Mercury Sayka 1:10 klar
YOK-SD-MS15L
CHF15.90
En stock  
+ −
Light Buckets für Pandem GR86
YOK-SD-GR86L
CHF15.90
En stock  
+ −
Front Universal Bone (73mm/1pcs)
YOK-MO-010FWB
CHF7.90
En stock  
+ −
Mirror for Lexus RC-F
YOK-SP-LFGT3A
Plastic mirror set that just fits LEXUS RC-F GT3 body for touring cars.
CHF6.90
En stock  
+ −
M2x10mm BH Screw (10 pcs)
YOK-ZC-BH210
Button head screws 2mm thick and 10mm long. 10pcs.
CHF2.50
En stock  
+ −
Aluminum Front Bulkhead Bridge RD2.0/SD2.0
YOK-RD-302FB
This aluminum front bulkhead bridge is recommended for RD2.0 and SD2.0. It increases the rigidity of the front area and improves the stability of the front section when diving into and coming out of corners, and increases the freedom of the driving line. The shoulder section has been...
CHF27.90
En stock  
+ −
Aluminum Rear Shock Lower Adapter RD2.0
YOK-RD-008RS
This Aluminum mounting Adapter holds the lower rear shock of the RD2.0. By increasing the rigidity of the shock mounting, it improves operationg precision and increaser road-following performance against minor vibrations. It is also heavier than the standard plastic one, which tends to increase...
CHF23.90
En stock  
+ −
Aluminum suspension mount "E" for RD2.0
YOK-RD-301AE
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
En stock  
+ −
F5.5mm Titanium Rod End Balls (2 each) 6mm
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
En stock  
+ −
F5.5mm Titanium Rod End Balls (2 each) 8mm
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Rupture de stock
F5.5mm Titanium Rod End Balls (2 each) 10mm
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
En stock  
+ −
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
En stock  
+ −
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
En stock  
+ −
Graphite molded LC Gearbox SO1.0/2.0
YOK-Z2-302TLCG
This is the LC gearbox for the SO series of 2WD off-road cars. Graphite-mixed resin, which is harder than standard, is used to increase the rigidity of the rear area. Especially when the throttle is turned on, there is less yawing and snagging, allowing for sharper cornering.
CHF17.90
En stock  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Prix

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Effacer