ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
24
Aluminum suspension mount "E" for RD2.0
YOK-RD-301AE
Aluminum suspension mount for RD2.0. Shaped to fit the RD2.0 suspension mount, which has a rearward gearbox position, this mount increases suspension rigidity for reliable operation and improved traction. The width of the suspension mount is a D width that can be set in the same range as the...
CHF27.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 6mm
YOK-RP-114-06
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 8mm
YOK-RP-114-08
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Nicht auf Lager
F5.5mm Titanium Rod End Balls (2 each) 10mm
YOK-RP-114-10
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
F5.5mm Titanium Rod End Balls (2 each) 12mm
YOK-RP-114-12
F5.5mm size rod end balls used in Yokomo's off-road cars are manufactured with titanium material. It can reduce weight at the tie rod and upper rod section, and is especially effective in improving steering response and dynamic performance on high-grip surfaces.
CHF9.90
Auf Lager  
+ −
SO1.0/2.0 Graphite molded Gearbox Cap
YOK-Z2-302CTG
Rear bulk cap and differential height adapter for SO series 2WD off-road vehicles. It is made of graphite-mixed resin, which is harder than standard, to increase stability around the rear.
CHF16.90
Auf Lager  
+ −
Wing for Mercury Sayaka Special S15
YOK-SD-MS15W
This is a spare wing set for MERCURY SAYAKA SPECIAL S15. Made of polycarbonate, the set includes the wing body, side dams, front canards, and side canards. Wing stay is not included. Please prepare aluminum wing stay (D-057LA etc.) separately.
CHF15.90
Auf Lager  
+ −
Linear Shock Spring 1.80 Purple for MS1.0
YOK-MS-SSL180
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Linear Shock Spring 1.85 White for MS1.0
YOK-MS-SSL185
These springs are softer than the MS1.0 standard springs. Effective for outdoor asphalt surfaces where you want more traction. Try a combination of 1.80 in the front and 1.85 in the rear.
CHF11.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 1.5mm thick
YOK-S4-SB1315
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2mm thick
YOK-S4-SB1320
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
Blank piston for SO/MO f13mm Shock 2.5mm thick
YOK-S4-SB1325
Blank pistons for off-road f13mm shocks, available in three different thicknesses from 1.5 to 2.5 mm, with thinner pistons operating softer and thicker ones tasting more hip. Piston holes can be drilled freely with a pin vise, etc. but guide marks are provided so that 2 to 6 holes can be...
CHF7.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Front (White)
YOK-YZ-821W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the use of current 2.2-inch size tires while retaining the YZ-870C's distinctive wheel hubs, making it possible to choose the best tires from a varied lineup for a variety of surfaces! The...
CHF8.90
Auf Lager  
+ −
2.2-inch Wheel for YZ-870C Rear (White)
YOK-YZ-827W-2
The YZ-870C's large-diameter 2.2-inch wheels are now available in a new white color, allowing the useof current 2.2-inch size tires while retaining the YZ-870C's distinctivewheel hubs, making it possible to choose the best tires from a variedlineup for a variety of surfaces! The...
CHF9.90
Auf Lager  
+ −
SO1.0/2.0 High Traction Offset Rear Suspension Arm
YOK-Z2-008R3H
SO series rear lower suspension arm. By shortening the wheelbase by up to 7mm on the suspension arm side, The rear load is increased by adding the angle of attack of the bone, and the rear grip is improved. Pitching control is also made easier, which improves turning performance.
CHF20.90
Auf Lager  
+ −
MO2.0 Axle for Double Joint Universal
YOK-MO-010FWA
Replacement axle for front double-joint universal released as an optional part for MO2.0. 1 piece.
CHF6.90
Auf Lager  
+ −
Caster Measuring Jig for MS1.0
YOK-YT-CMJ
This tool is attached to the steering block to facilitate caster measurement when measuring MS1.0 alignment. Compatible with various touring car alignment gauges.
CHF10.30
Auf Lager  
+ −
Front Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-821Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF8.90
Auf Lager  
+ −
Rear Wheel (Yellow) 2.2 inch for YZ-870C
YOK-YZ-827Y-2
The YZ-870C's distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tires, which are widely available on the market today. This greatly expands the tire options for both dirt and carpet surfaces, allowing you to enjoy driving with...
CHF9.90
Auf Lager  
+ −
Alu Shim 3x6x4 (Black, 8pcs)
YOK-ZC-A3640B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Alu Shim 3x6x5 (Black, 8pcs)
YOK-ZC-A3650B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Alu Shim 3x6x6 (Black, 8pcs)
YOK-ZC-A3660B
These aluminum spacers are even thicker than conventional ones. Even when the same thickness is used, it provides greater strength and precision than stacking multiple pieces. They are available in three thicknesses ranging from 4 mm to 6 mm, each containing 8 pieces.
CHF5.90
Auf Lager  
+ −
Graphite Lightweight front lower suspension Arm
YOK-B12-008FR
Graphite Lightweight front lower suspension arm (right) +0.5mm for BD12/11 This lightweight graphite suspension arm has been made lighter than before by changing the cut line, and has further improved maneuverability and traction. Compared to the standard suspension arm of the BD12, it is...
CHF36.90
Auf Lager  
+ −
Titanium Turnbuckle 65mm (2pcs)
YOK-ZC-TB65T
This Turnbuckle can be titaniumized to fit each car. The Weight of the rod is reduced, which is effective in improving driving performance.
CHF12.80
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)