ERSATZTEIL-FINDER

Yokomo

Ordnen nach:
Empfohlen
24
Main Chassis RO2.0
YOK-RO-002
CHF36.90
Auf Lager  
+ −
Rear Shock Tower/Rear Upper Mount RO2.0
YOK-RO-018RD
CHF11.90
Auf Lager  
+ −
Gear Box RO2.0
YOK-RO-302D
CHF8.90
Nicht auf Lager
Steel Top Shaft RO2.0
YOK-RO-303TS
CHF17.50
Auf Lager  
+ −
Aluminium Motor Plate RO2.0
YOK-RO-304D
CHF11.90
Auf Lager  
+ −
Gear Cover / Rear Wing Mount RO2.0
YOK-RO-304GC
CHF7.90
Auf Lager  
+ −
Resin Shock Cap Balls für RS2.0
YOK-RS-8B
Plastic shock cap balls used in RookieSpeed RS2.0. 4pcs.
CHF3.90
Auf Lager  
+ −
1.8mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S182-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Auf Lager  
+ −
1.9mm 2-Hole Piston für 13mm Shocks SO/MO
YOK-S4-S192-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Auf Lager  
+ −
2.0mm 2-Hole Pistons für 13mm Shocks SO/MO
YOK-S4-S202-25
This is a piston for SO/MO series 13mm big bore shocks. The hole diameter is 2 holes of 1.8 to 2.0mm, but the piston thickness is set to 2.5mm to obtain firm damping due to hydrodynamic action. Packed 2 pieces each.
CHF6.90
Auf Lager  
+ −
Front Sway Bar 0.9mm for SO Series (1pcs)
YOK-SO-412F09
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Front Sway Bar 1.0mm for SO Series (1pcs)
YOK-SO-412F10
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Front Sway Bar 1.1mm for SO Series (1pcs)
YOK-SO-412F11
Front sway bar for SO series, available in 3 types from Φ0.9 to 1.1mm, one each for easy purchase.
CHF3.90
Auf Lager  
+ −
Aluminum Steering Bellcrank Set for RD2.0
YOK-RD-202A
Aluminum steering bellcrank set for RD2.0. By adding a forward lean angle to the wiper post, it reduces bump changes when a cutting angle is added and shows neutral characteristics. Also, the servo rod mounting length can be adjusted with a spacer, allowing the feeling to be changed according to...
CHF69.00
Nicht auf Lager
Steel Front Axle for double Bearing
YOK-RD-010FDA
This is a front axle sold separately, used for the double-bearing design that provides the ultimate in front tire rolling. While made of steel for increased strength, the 3mm shaft and hub shape provide a lightweight finish.
CHF14.90
Auf Lager  
+ −
40mm Fan Shroud for Mid Motor MS1.0
YOK-YM-FS40
This fan shroud is designed to be used in conjunction with a cooling fan on a touring car chassis to effectively increase the cooling effect of the motor. The 40mm fan shroud is attached to the chassis with double-sided tape to direct the airflow from the fan to the engine, and can be used not...
CHF13.90
Auf Lager  
+ −
40T Pulley for Front Solid Axle RS1.0/RS2.0
YOK-RS-501SP
CHF6.90
Auf Lager  
+ −
Body Wax 35cc
YOK-CS-WB
Dieses Karosseriewachs ist für Polycarbonat- und Kunststoffkarosserien von RC-Fahrzeugen geeignet und wird in einer praktischen Quetschflasche geliefert. Einfach etwas Wachs herausdrücken und mit einem weichen Tuch auftragen – so lassen sich Staub und Schmutz leicht entfernen und der Glanz der...
CHF14.90
Auf Lager  
+ −
Machine Cut 38T Pulley for Aluminium Gear Diff
YOK-MS-503GP
CHF21.90
Auf Lager  
+ −
O-Ring for Aluminium Gear Diff BD11/BD12/MS1.0
YOK-MS-503GO
CHF2.90
Auf Lager  
+ −
Yokomo Multi Spring Case
YOK-YT-29
This spring case allows you to neatly store shock springs, which tend to be cumbersome. The lower section is designed to hold springs for a variety of spring types, from speed to off-road, and the upper section can hold springs in their bagged state. Of course, it comes with the Yokomo Racing...
CHF31.90
Auf Lager  
+ −
Universal 30mm Fan Shroud
YOK-YM-FS30
This fan shroud is fitted to a 30mm fan to increase cooling efficiency through the channel effect. It is mounted on an adjustable angle bracket and can be installed on a variety of machines. It is particularly suitable for drift cars that require engine cooling and can be attached to the upper...
CHF14.90
Auf Lager  
+ −
Shock Diaphragm (soft) MS1.0/Big Bore Shocks
YOK-YS-8DS2
Diaphragm for MS series and big bore shocks for drifting. The weak resilience of the soft type is effective in increasing traction on low-grip surfaces.
CHF7.90
Auf Lager  
+ −
Aluminum Lower Bulkhead (A) FL/RR RS1.0/RS2.0
YOK-RS-32ALA
CHF26.90
Auf Lager  
+ −
Verfügbarkeit
Verfügbar beim Lieferanten
Abmessungen
Auswahlhilfe
Material
Preis

CHF  –  CHF

  • ‎CHF1.5
  • ‎CHF949
Reifen/Rad-Typ
Servo-Typ
Verwendung
Massstab
Motor / Antrieb
Einsatz
Anspruch
Lackierung
Fertigungsgrad
Max. Geschwindigkeit
Marke
Betriebsspannung
Zurücksetzen (reset)